INTERIOR FURNISHING ELECTRICAL AND AIR CONDITIONING WORKS OF KERALA BANK LIMITED ALUVA BRANCH

Amount

GENERAL FALSE CEILING

Gypboard plain ceiling -Supply and fixing of M/S suspended ceiling as per levels marked in the mirror plan.Ceiling to have Al.perimeter channels of size. 0.55mm thick (Having one flange of 20mm and another flange of 30mm and web of 27mm)along the perimetre of ceiling screw fixed to brick wall/partition with the help of nylon sleeves and screws at 610mm C/C. Ceiling to have suspended GI intermediate channels of size 45mm (0.9mm thick with 2 flange of 15mm each ) at a spacing at 1220mm c/c suspended using ceiling angle of width 25mm x 10mm x 0.55mmfixed to soffit with GI cleat and steel expansion fastners.Ceiling sections of 0.55mm thickness having knuckled web of 51.5mm and 2 flanges of 26mm each with lips at 457mm c/c. 12.5mm tapered edge gypboard to be screw fixed to ceiling section with 25mm dry wall screws at 230mmc/c.Boards to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound .Joint paper tape and two coats of dry wall top coat suitable for gypboard.Rates to be inclusive of providing cutout for electrical fittings,grills,diffusers including providing / edge bead to be provided on edges Rate to be inclusive of all related labour,wastage,cost of materials transportation etc complete .

Horizontal ceiling

Vertical ceiling

PARTITIONS /RELATED WORKS-GENERAL DOUBLE SKIN PARTITIONS

Double skin partitions to be of various heights /finish as stated but of the following general specifications .partitions to be 7.5 cm thick with inside base frame in 19mm Mply @45cm c/c .Bothsides of frame to be in 9mm Mply with laminated finish. Bottom sections to be screwed to floor base frame using suitable anchor bolts .Rates also to be inclusive of all related materials costs,labour,wastage etc complete.

Details of height/finish of various Dskin partitions

dwarf/full height partitions

Glass partitions

Providing and fixing of 12mm toughened glass as per design for the Manager cabin/ front.Glass to be fixed using wooden teak/beech beadings. Rates also to be inclusive of all related materials costs,labour,wastage etc complete.

Providing and fixing of 12mm toughened glass as per design for the cash cabin sides/front .Glass to be fixed using spacers as per detailed dwg enclosed. All glass edges to be polished rates also to be inclusive of all related materials costs,labour,wastage etc complete.

DOORS

Providing and fixing toughened glass door to Bank Entry . Door to be in toughened 12mm glass fixed on floor springs of good quality make.Doors to be hung using patch fittings. Rates to be inclusive of all hardware including SS handle 120 long on either side of door , locks etc complete. Rates to be inclusive of cost of materials, labor, transportation,scaffoldingetc complete

ENTRY DOOR

CABIN DOORS

Flush doors (FD)

Providing and fixing general flush doors . Flush doors to be 2.5 cm thick with bothside Mply . Front face of doors to be in laminated finish with inside also in laminate finish .Rates to include door opening paneling in 8 cm x 1.5 cm beechwood /Teakwood . Rates to further include cost of door closer ,handles , lock etc complete . All exposed wood to be melamine finished .Rates also to be inclusive materials costs,labour ,transportation etc complete

Cash cabin doors

Providing and fixing of Cash cabin door.door to be 75 wide with 210 height. Door to be in 2.5 cm thick beech wood/Teakwood frame with top glass insertion and bottom in laminated Mply insertion . Rates to include cost of hinges,locks and Sshandles etc.All exposed wood to be melamine polished.Rates to be inclusive of materials costs,labour,transportation etc.

Supply and fixing wicket door 90x75cms(laminate finish)

Supply and fixing of Fibre toilet doors including frame

FURNITURE & RELATED ITEMS

Supply and positioning of manager Table with side unit . Table and side unit to have laminated top . Table to be of size 180 x 75 with side table 90 x 45 cms . Table to have oneside draw unit and key board tray. Table front to be as per design with back painted glass cladding. Tables to have provision for CPU stand .All exposed ply edges to be lipped . Adequate footrest to be provided below . Tables to have external laminated finish with inside enamel paint finish . All exposed wood to be melamine polished.Rates to include cost of hinges ,locks and handles.Rates to be inclusive of materialscosts,labour ,transportation etc

COUNTER AND RELATED ITEMS

Providing and fixing of main general bank counter. Counter to be of profile as per design with table top height (75cm ). Table top to be in laminte finish with front edge of double thickness lipping . counter to be of 15 mm mply base unit with individual draw unit as per dwg. for each counter staff . front face to have back painted glass finish . Rates to include cost of hinges ,locks and handles.Inside of counter to be painted finish . counter to have footrest and CPU stand for individual counter staff . all ply edges o be lipped and melamine faced Rates to be inclusive of materialscosts,labour ,transportation etc(ref dwg). Rates ti further include modular type side partition 60mm thick with 120 cms height , top portion in pin up / marker and bottom in powder cated metal embosed sheet finish.

Providing and fixing of counter of above specification with staff top @75 lvl and customer top @105 lvl with front face and top of customer top in corian material.

General specification similar to item A

Supply and fixing of side tables for all counters /front office staff . side tables to be of size 95cm x 45 with 2 nos draw and bottom storage (side table height 72 cms ) . side table to be in 19/15 mm Mply with laminated finish . inside to be in painted finish . Rates to include cost of hinges ,locks and SS handles,sliding channels etc complete . Rates tobe inclusive of materials costs,labour,transportation etc.

supply and fixing of substaff table /auditor table size 150x60 including side table size 90 x 45 with specifications similar to manager table

Note Bundling table

STORAGE UNITS

Providing and fixing low height /full height storage units inside manager cabin/general areas , Storage units to be in base 19mm ply.Top of units to be of edge banded finish .Shutters to be in 19mm Mply with edge banded sides. . locks to be provided for each storage unit .Shutters to be fixed using 110 overlay autoclosing hinges .All shutters to have 4” SS handle . Iinside of storage unit to be in laminate finish . Storage to have 2 nos 19mm Ply intermediate inside shelves on each shutter bay .FINISH - inside laminated,top&shutters - edge banded

Rates also to be inclusive of all related materials costs,labour,transportation etc complete

GENERAL ITEMS-Providing vertical blinds for the windows

Blinds to be of branded make with 10 cm wide blinds controlled using high quality sliding and fitting mechanisum colour - as per approved colour scheme.

Providing emulsion paint as per approved colour scheme . emulsion to be applied over putty base with necessary primer coats emulsion to be applied using roller.

Providing emulsion paint as per approved colour scheme (kerala bank Red color) . emulsion to be applied over putty base with necessary primer coats emulsion to be applied using roller.

Ordinary painting in OBD over necessary primer base

Writing table Supply and fixing of writing table of size 150x40 cms.Table to be made using 19mm ply with top in laminate finish. 5mm back painted glass to be laid over top. Top height to be at 100 lvl. Intermediate glass shelf in 12mm glass to be provided 15cms below top. Glass shelf to have edge polished finish. All exposed faces of table to have laminate finish.Rate to include cost towards cheque drop box, sujjestion box ( on either side of writing table below writing table) and pin up boad of size 150x 120 cms above writing table.(exeternal and internal faces has to be laminated)

Providing Al grills for the cash cabin top

Providing and fixing UPVC/WPC pantry cabinet in 19mm thick carcass and shutters with top in black granite.Shutters to be mounted on autoclosing hinges and cost to be inclusive of SS handles for shutters.

Providing and fixing UPVC/WPC pantrytop storage cabinet in 19mm thick carcass and shutters Shutters to be mounted on autoclosing hinges and cost to be inclusive of SS handles for shutters.

Supply and placing of dining table six seater with SS legs and laminated top including 3 dining chairs with SS legs and PVC/ Fibre seat.

Brick partitions with side plastering

Supply and fixing of collapsible grill including enamel painting

Enamel painting of window grill and rolling shutter

A-POWER SUPPLY

M. V PANELS/ DISTRIBUTION BOARDS

KSEB METERING CUBICLE

Supply and fixing of CT Type KSEB metering cubicle made out of 16CRCA sheet powdercoated with approved shade consists of 100A TPN SFU with 80A HRC Links ,100A Bakelite HRC cutout with 80A HRC fuse Links with 100A Bakelite Type Neutral Link & provision for CT operated KWH meter.

Supply:

Installation:

M. V PANELS/ DISTRIBUTION BOARDS

POWER SPLIT DB

Supplying,installing,testing &commissioning of 3 ph 4 Way,Vertical busbar,MCCB type Power Distribution Board, flush mounted on wall, sheet metal fabricated,powder coated,having dust proof and vermin proof,and hinged door with all internals such as DIN rails, neutral-link,interconnected wiring complete with earthing lugs, double door, IP42, with all connections and inter-connections and comprising the following Specific Components. (MDB)

Incomer -1 No. 80A 4P, 25kA [Ics], MCCB with Shunt Trip [Wired from EL Relay]-EL Relay [Electronic 0-300mA] with CBCT [ID-100mm]

Bus Bars-150A Copper bus bars for phase and neutral. ,Outgoings 1 Nos. 40A, 3PMCB [1xUPS],1 Nos. 63A, 3PMCB [1xMDB], 3 Nos. 10A/16A, SPMCB [Signage/ Lighting, Spare] & 3 Nos MCB Dummy.

Supply:

Installation:

MAIN DB

Supplying,installing,testing &commissioning of 3ph 8way,vertical busbar,MCCB type Power Distribution Board, flush mounted on wall, sheet metal fabricated,powder coated,having dust proof and vermin proof,and hinged door with all internals such as DIN rails, neutral-link,interconnected wiring complete with earthing lugs, double door, IP42, with all connections and inter-connections and comprising the following Specific Components. (MDB)

Incomer -1 No. 80A 4P, 25kA [Ics], MCCB with Shunt Trip [Wired from EL Relay], Bus Bars-125A Copper bus bars for phase and neutral.,Outgoings-1 Nos. 40A, 3P MCB [ Power DB],2 Nos. 25A, 3PMCB [LDB & Spare)],Outgoings: : 3 Nos 20A (1TR-AC), 2 Nos 32A (2TR-AC) and 1No 25A (1.5Tr AC), 6 Nos 20/16A SPMCBs (Power points). All MCBs shall be 10kA Rating.

Supply:

Installation:

DB [LIGHTING POINTS]

Supply, installation, testing and commissioning of 4 way TPN MCB DB with the following:

Incomer 25A, 4P, 30mA RCBO,Outgoings: 8 Nos 6A and 4 Nos 10A SP MCBs

Supply:

Installation:

UPS DB [UPS POWER DISTRIBUTION (BANK & ATM ]

Supply,installation,testing and commissioning of 12 way [12+4 Module] SPN MCB DB with the following:

Incomer 40A, 2P, 30mA RCBO [High Immunity Type Legrand OR Equivalent],Outgoings: 6A/10A/20A, D-Curve SPMCBs - 10 Nos.

Supply:

Installation:

UPS CONTROL [INPUT]

Supply, installation, testing and commissioning of 40, 4P, 100mA, RCBO with in suitable factory manufactured MS enclosure with all interconnections and wiring.

Supply:

Installation:

RAW POWER POINTS

Supply, installation, testing and commissioning of 32A Modular type DP switch control with in suitable sheet steel enclosure (Control Switch for Stabiliser out Put at Electrical Room and 1 Phase A/C Local Isolation)

Supply:

Installation:

Supply, installation, testing and commissioning of 1 Nos. 16/6A, Multi Pin modular type socket with out control switch mounted in a suitable M.S box with modular front plate, including all inter connections. (Power Points & AC Indoor Points)

Supply:

Installation:

Supply, installation, testing and commissioning of 1 Nos. 6A, 5 pin modular type socket with 1 No. 6A SP control switch mounted in a suitable M.S box with modular front plate, including all inter connections. (Costomer area, Electrical Room.)

Supply:

Installation:

Supply and installation 16A 2P +E-DP ,Legrand make Tempra plug and socket with 10A DP MCB etc ., complete (strong room)

Supply:

Installation:

Supply ,installation&testing Legrand make 24hrs,modular timer (MicroRex-4128)in a suitable steel enclosure for ATM sign board.

Supply:

Installation:

RAW POWER COMPUTER POINTS

Supply, installation, testing and commissioning of 1 Nos. 6A, 5 pin modular type socket with 1 No. 6A SP control switch mounted in a suitable M.S box with modular front plate, including all inter connections. (Work stations/ Cabins etc.)

Supply:

Installation:

UPS COMPUTER POINTS

Supply, installation, testing and commissioning of 1 Nos. 16/6A, Multi Pin modular type socket with 1 No. 16A SP control switch mounted in a suitable M.S box with modular front plate, including all inter connections. (UPS Power Points)

Supply:

Installation:

Supply, installation, testing and commissioning of 2 Nos. 6A, 5 pin modular type socket with 1 No. 6A SP control switch mounted in a suitable M.S box with modular front plate, including all inter connections. (All work stations)

Supply:

Installation:

SITC of 40A TP MCB Isolator control with in suitable sheet steel enclosure for isolating total supply to DB except UPS

Supply:

Installation:

LOCAL ISOLATION

SITC of 100A 4P MCCB Isolator control with in suitable sheet steel enclosure for isolating total supply to Bank except UPS & ATM

Supply:

Installation:

SUB-MAIN POWER WIRING - COPPER WIRING

Supply, laying, testing and commissioning of submain circuits using 2 run 2.5 Sqmm PVC insulated, FRLS, stranded copper cable along with 1 run 2.5 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductor through 20mm dia ISI Graded rigid PVC conduits, black with all specials including terminations complete as per standards, under consealed conduit system of wiring. Proper color coded wires shall be used for the entire wiring.(15A power points.)

Supply:

Installation:

Supply, laying, testing and commissioning of submain circuits using 2 run 4.0 Sqmm PVC insulated, FRLS, stranded copper cable along with 1 run 4.0 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductor through 20mm dia ISI Graded rigid PVC conduits, black with all specials including terminations complete as per standards, under consealed conduit system of wiring. Proper color coded wires shall be used for the entire wiring. (15A power points and A/C points)

Supply:

Installation:

Supply, laying, testing and commissioning of submain circuits using 5 run 6.0 Sqmm PVC insulated, FRLS, stranded copper cable [1x3 Phases and 2x1 nutral] along with 2 run 4.0 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductors through Flexible GI conduits with conduit glands, specials etc. including terminations complete as per standards. (UPS Power Points to UPS)

Supply:

Installation:

Supply, laying, testing and commissioning of submain circuits using 3 run 10.0 Sqmm PVC insulated, FRLS, stranded copper cable [1x1 Phase and 2x1 nutral] along with 1 run 4.0 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductors through Flexible GI conduits with conduit glands, specials etc. including terminations complete as per standards. (UPS DB to UPS)

Supply:

Installation:

PART- II - LT CABLES AND CABLING

L T CABLES-CABLE LAYING

Supply and laying the following PVC insulated PVC sheathed armoured 1.1KV grade Aluminium /Copper conductor cable conforming to IS:1554 (part-1) in cable trenches or on convrete wall or through pipes as per specifications, cinluding providing of cable route makers in every 50M and at all strategic turning/ diversion points etc. Necessary clamping should be providing while burying cables in prepared trenches etc.as per standards.

4.0x35 Sq.mm, Meter Board to Split DB & MDB

Supply:

Installation:

4.0x10 Sq.mm, MDB to LDB

Supply:

Installation:

3Cx2.5sqmm Copper cable (Glow Sigh Board)

Supply:

Installation:

CABLE TERMINATIONS

Supply and providing end terminations using siemens type compression gland for PVC insulated and PVC sheathed armoured conductor cable 1.1KV grade for the followings sizes including earthing the glands as required as per standards.

4.0x35 Sq.mm

Supply:

Installation:

4.0x10 Sq.mm

Supply:

Installation:

3.0x2.5 Sq.mm Cu

Supply:

Installation:

PART- III - EARTHING

COPPER EARTHING CONDUCTORS

Supply, Laying/ fixing of earthing conductor of the following sizes/ type, jointing as per IS:3043/87 in trench walls pulling through pipes etc.as required.

Copper wire No.10 SWG

Supply:

Installation:

EARTHING STATIONS- GRID

Supply of all materials and providing pipe earthing using 40mm dia, 2.5 Mtr Long GI Pipe earth Electrode as per IS 3043 including excavation of earth pits in all class of soil, fixing funnel etc. shall be housed in a chamber of 30cmx30cmsx45cms covering the same using heavy duty C.I / RCC slab man hole cover etc. including filling with charcoal sand and salt complete as required. [Common Earthing]

Supply:

Installation:

EARTHING STATIONS - UPS - DRIVEN CHEMICAL EARTHING

Providing maintenance free earthing (MFE) comprising of 17mm dia, 3.0 mtr long copper bonded stainless / nickel steel alloy rod suitably joined together with threadless / compression couplers made of copper alloy including supply of copper coated steel rod, suitable clamps for connecting body earthing strips and all other accessories required for the total erection of the earthing system. The copper bonded rod shall have copper bonding thickness of 250 microns (minimum). The rod shall be driven in earth with augured hole dia of 75-100mm in ground. The conductivity / earth enhancement compound (Confirms to IEC:62651-7 with latest amendments) filled around the copper rod to a depth of 3.0 Mtrs from ground level. The remaining depth shall be compacted with hard/ soft soil for complete erection of the total system including civil works like excavation & refilling of earth, construction of earth pit chamber with Cover Plate OR RCC cover slab as required and as directed by Bank's EIC/ Consultant.

Supply:

Installation:

SAFETY EQUIPMENTS

Electrical ISI Grade Rubber Mat suitable for L.V Switchboards. (6' x 3' x 1/4").

Supply:

Installation:

L.T./H.T Mettallic danger sign boards.

Supply:

Installation:

PART- IV- DOCUMENTS & APPROVAL

Preparation of necessary documents, forms, drawings, schemes, certificates,etc. and getting scheme approval, Energisation Sanction Orders etc. from the Department of ElectricaI Inspectorate for the installation. All statutory charges shall be reimbursed on production of proper receipts.

Preparation of necessary documents, forms, drawings, schemes, certificates,etc. and getting power allocation sanction and power connection from Power supply authorities/ Company. All statutory charges shall be remitted by the Clients.

B-LUMINAIRES/FANS AND CONNECTED WIRING

PART-I-LUMINAIRES AND FANS

Supply, installation, testing and commissioning of the following luminaires/fans using suitable mountings, 3-core extension wire, 6000K lamps and using GI Chain and Anchoring Hooks at Ceiling etc. complete as required.

Recessed mounting luminaires with 36W LED,6000K, 60x60mm Size, Suitable for Grid type Ceiling Complete with Lamps, Driver etc. (LM25-361-XXX-65-G1; Wipro make OR Equivalent)

Supply:

Installation:

Recessed Mounting down lights with 12W, 6000K, LED Spot Light Type: LD90-141-XXX-65-XX (Wipro Make OR Equivalent.)

Supply:

Installation:

4', LED Tubes with Drive, etc. complete, Wipro/Philips

Supply:

Installation:

Oscillating type wall fan 400mm (Crompton High Flow)

Supply:

Installation:

200mm Exhaust Fans with Louvers

Supply:

Installation:

Mirror lamp with 10W LED 2 feet lamps

Supply:

Installation:

Supply and fixing of 10W LED Wall Bracket/ Bulk Head fitting (Philips)

Supply:

Installation:

Call bell electronic for Manager's Cabin (G M Make)

Supply:

Installation:

Supply of 1200 mm sweep, 35W, 350 rpm, BEE 5 star rated energy saving BLDC based ceiling fan and suitable for operation on 230V, 50Hz, 1Ø AC supply, complete with 300mm down rod, 2 Nos of canopies, shackle, rubber bush, 3 nos of blades, remote controller for On / Off operation with 5 speeds, minimum air delivery of 215 m3 / min, completely pre wired upto terminal block, etc., including supply of all materials for installation as required and as directed by EIC. (including supply and fixing of Anchor Fastener on RCC slab and fan hook if necessary), Star Rated but with out Regulator

Supply:

Installation:

PART-II-LIGHTING POINTS & SUBMAIN CIRCUITS

LIGHTING POINTS-Supply, laying, testing and commissioning of light/fan/5A SSO points using 1.5 Sqmm PVC insulated, FRLS, stranded copper conductor cable for individual lights and group controlled lights along with 1.5 Sqmm PVC insulated FRLS green color stranded copper conductor cable earthing conductor through 20mm dia, ISI Graded Rigid PVC Conduits black with all specials including fixing MS Control boxes, modular switches, 3 plate ceiling roses etc. where ever necessary, under consealed / Surface conduit system of wiring. Proper color coded wires shall be used for the entire wiring.

One light point controlled by one No. 6A switch and Cove Light Points

Supply:

Installation:

Two lights points controlled by one No. 6A Switch

Supply:

Installation:

Three lights points controlled by one No. 6A Switch

Supply:

Installation:

One 5A SSO point combined in light control board

Supply:

Installation:

One 5A SSO point at independent position for TV/ Wall Fan/ Other Light Equipments point Etc.

Supply:

Installation:

SUBMAIN CIRCUITS

Supply, laying, testing and commissioning of submain circuits using 2 run 2.5 Sqmm PVC insulated, FRLS, stranded copper cable along with 1 run 2.5 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductor through 20mm dia ISI Graded rigid PVC conduits, black with all specials including terminations complete as per standards, under consealed conduit system of wiring. Proper color coded wires shall be used for the entire wiring.

Supply:

Installation:

Supply, laying, testing and commissioning of submain circuits using 2 run 1.5 Sqmm PVC insulated, FRLS, stranded copper cable along with 1 run 1.5 Sqmm PVC insulated, FRLS, green color stranded copper cable earthing conductor through 20mm dia ISI Graded rigid PVC conduits, black with all specials including terminations complete as per standards, under consealed conduit system of wiring. Proper color coded wires shall be used for the entire wiring.

Supply:

Installation:

C-DATA, VOICE & MUSIC SYSTEM

PART-I-LAN SYSTEM

Supply and Laying of Computer (LAN) socket and Voice wiring using one run of four pair CAT- 6 Unshielded Twisted Pair (UTP) Cable through 20mm rigid PVC conduit/ PVC Casing Caping. (Excluding Conduits)

Supply:

Installation:

Supply and fixing of LAN Information outlet UTP CAT 6, Shuttered Flush mounted with face plate and GI / PVC mounting box including terminations.

Supply:

Installation:

Supply of Cat 6 Patch / Mounting Chords

2meter long

1meter long

NETWORKING AND ACCESSORIES

Supply & fixing of LAN patch panel CAT-6, 16 Port with in the Networking Rack and giving terminations for cables from LAN Info. Outlets.

Supply:

Installation:

NETWORK RACK: Supply and Installation of 9U, Wall Mounting Open type, Networking Rack with ladder kit-500mm width, for Data Components, Horizontal Power Strip controlled by 1 no. 16A DP switch each, and with all necessary accessories/ components required for the installation, including Mounting frame etc.

Supply:

Installation:

PART-II-VOICE SYSTEM (TELEPHONE)

Supply and laying one run of Twenty pair jelly filled telephone wire upto Terminal connectors thruogh 25mm Dia. Conduits

Supply:

Installation:

Supply and drawing 2pair 0.5mm telephone cable through 20mm dia. ISI marked medium duty conduits and accessories

Supply:

Installation:

Supply and providing telephone outlet points using RJ-11 modular sockets/ Jack within suitable MS control boxes

Supply:

Installation:

Supply and providing Telephone Terminal box, Sheet Steel Powder Coated with 20 Pair Crone connectors including all terminations.

Supply:

Installation:

PART-III-CC TV AND CAMERA SYSTEM

CAMERA - INDOOR

Supply , Installation, Testing and Commissioning of 2MP IP Indoor IR Dome Camera

Supply:

Installation:

CAMERA - OUTDOOR

Supply , Installation, Testing and Commissioning of 2MP IP Out door IR Dome Camera/ Bullet Camera with metallic Body

Supply:

Installation:

Supply , Installation, Testing and Commissioning of 24 Channel NVR

Supply:

Installation:

4TB HDD

Supply , Installation, Testing and Commissioning of 4TB Hard disk

Supply:

Installation:

PATCH PANEL

Supply & fixing of LAN patch panel CAT-6, 24 Port with in the Networking Rack and giving terminations for cables from LAN Info. Outlets.

Supply:

Installation:

EATHERNET SWITCH

Supply and Installation of CAT 6, 24 Port, 10/100/1000, Smart Manageable, Rack mount Switch, Make : CISCO OR ARUBA, PoE Managed Switch with Tigabit Uplinks and OFC Port for interlinking/ parallelling to another switch with in the Networking Rack and giving terminations for LAN Cables.

Supply:

Installation:

NETWORK RACK

Supply and Installation of 6U, 500mm depth, wall mounting type, Networking Rack with cable management kit,for Data Components, 1 sets Horizontal Power Supply with suitable nos. power outlets and all necessary accessories/ components required for the installation, including front glass door, rear metal cover etc.

Supply:

Installation:

LAN CABLING FOR CAMERA

Supply and Laying of Computer (LAN) socket wiring using one run of four pair CAT- 6 Unshielded Twisted Pair (UTP) Cable through 20mm rigid PVC conduit/ PVC Casing Caping. (Excluding Conduits)

Supply:

Installation:

PART-IV-LOW VOLTAGE SYSTEM CONDUITS

Supply and laying of the following sizes of Electrical rigid PVC conduits of ISI grade, medium duty for laying recessed through brick wall or in surface through/ wall false ceiling / 25mm PVC casing and caping in surface etc. The work should also include fixing of pull out boxes/junction boxes etc. The PVC conduits for laying of LAN information Cables should be laid with standard clearances as required under the guidance of a certified system Integrator, under consealed conduit system of wiring.

Supply, installation, testing and commissioning of 20mm DIA rigid PVC conduits of ISI Medium Duty

Supply:

Installation:

Supply, installation, testing and commissioning of 25mm DIA rigid PVC conduits of ISI Medium Duty

Supply:

Installation:

Supply, installation, testing and commissioning of 25mm PVC Casing and Caping

Supply:

Installation:

AIR CONDITIONING WORKS

MAKE - BLUESTAR / DAIKIN / MISTUBHUSHI / VOLTAS / HITACHI / CARRIER (Inverter Machine)

HIGHWALL SPLIT UNITS (3 Star - Inverter type)

Supply of Air Cooled Split type Air Conditioners comprising High wall split Indoor Units ,R32 Gas, Outdoor Condensing unit (with copper coil) , isolating valves, thermostatic control, safety cutouts, Power connections, Operating on 230Volts / 50 Hz, Single Phase Supply , and Cordless remote control.(Includes 3 meter copper pipe)

1 TR Split Units

1.5 TR Split Units

2 TR Split Units

LOW SIDE ANCILLARY WORKS

HIGHWALL SPLIT UNITS (3 Star - Inverter type)

Installation Testing & commissioning of Air Cooled Split type Air Conditioners comprising High wall split Indoor Units ,R32 Gas, Outdoor Condensing unit (with copper coil) , isolating valves, thermostatic control, safety cutouts, Power connections, Operating on 230Volts / 50 Hz, Single Phase Supply , vibration isolation pads and Cordless remote control

1 TR Split Units

1.5 TR Split Units

2 TR Split Units

REFRIGERANT PIPING (MAKE:COPPER PIPE-TOTAL LINE,MAXFLOW,UNIFLOW) (MAKE: INSULATIONS - TOTAL LINE,SUPERLOAN)

Supply Installation and Commissioning of Hard/Soft copper Refrigerant piping, complete with fittings, elbows, bends, supporting arrangement on walls (RMT:Suction & Discharge)

1 TR Split Units

1.5 TR Split Units

2 TR Split Units

CONTROL CABLING (MAKE: FINOLEX,V GUARD)

Supply & Installation of 2 Core PVC Insulated flexible control cable with saddles / supportes and PVC conduits to connect outdoor unit with Indoor unit

DRAIN LINE (MAKE:SUPREME,FINOLEX,ASTREL)

Supply and Installation of Drain pump for split units.

STABILIZER ( V GUARD / SYSCOM )

Supply & Installation of Stabilizer for split units

4 KV Stabilizer

5 KV Stabilizer

OUTDOOR STAND

Supply & Installation of wall mounted support for ODU of split AC

Transportation,loading and unloading o for the above machines

GOLDEN GLOBE INDUSTRIES (BID ID -2201209)

SABROS DECOR SYSTEMS PVT. LTD. (BID ID -2208560)

HELSA ELECTRICALS PVT LTD (BID ID -2208356)

HARIDAS A A (BID ID -2210391)

Ashly Furnishing Co Pvt Ltd (BID ID -2210148)

SHREE DESIGNERS (BID ID -2209668)