PROCUREMENT OF MASS FLOW METER

Mass Flow meter, Coriolis Type Process Conditions: Flow Range in Tonnes/Hour : 0-9 End connection : 1 , ANSI 150 Service : Sulphuric Acid Working Pressure : 10 kg/cm2 Density : 1.84 kg/m3 Working Temperature : -35 Deg C to 150 Deg.C TRANSMITTER: Type : Smart Microprocessor based Remote Field Mounted with Display Display : Required, LCD backlit, alphanumeric Range : User Configurable Flow accuracy (including sensor) : Better than +/-0.15% Flow Repeatability (including sensor) : Better than +/-0.1% Output 1) Analog Output, 4-20 mA DC, HART compatible Output 2) Pulse Output Maximum Load Impedance : <500mohms Power Supply : 110VAC, 50 Hz +/- 10% Display Language : English Display shall have: a) Actual flow rate; b) Flow units : T/hr, kg/hr configurable through front panel keypad c) Totalizer (non-volatile) with Reset facility d) Totalizer units: Tonnes; Kilograms e) Density; f) Density Units : g/cc g) Status / error messages Calibration facility : Required through front panel keypad and HART communicator Configuration : Required through front panel keypad and HART communicator Protection with access code: Required for calibration/ configuration/setup data Memory : Non-volatile EEPROM Self-Diagnostics : Required Empty or Partially filled flow tube detection : Required Cable entry : 1/2 NPTF Junction box/ terminal box material : Die Cast Aluminium Enclosure : Weather proof to IP 67 Mounting Brackets : Required, SS304 for pipe mounting Working Temperature : 0 to 55 Deg.C Humidity : Up to 95%(RH) SENSOR: Type : Coriolis type, enclosed in a hermetically sealed housing Meter size and pressure rating : Vendor to specify End connection : Flanged, RF Flowtube/Wetted Parts Material : Hastelloy C or better suited for the process fluid Housing Material : SS304 Junction box/ terminal box material : Die Cast Aluminium Interconnection cables between Sensor and Transmitter : 25 metres required Distance between sensor & transmitter : 25 m (maximum) Interchangeability of Sensor and Transmitter : required Instrument details : To be punched on SS plate mounted on sensor and transmitter. Explosion proof certification required for Sensor & transmitter Hydraulic test pressure : 1.5 times Maximum Working Pressure Painting : As per manufacturer’s standard.

Mass Flow meter, Coriolis Type Process Conditions: Flow Range in Tonnes/Hour : 0-25 End connection : 2 , ANSI 150 Service : Sulphuric Acid Working Pressure : 10 kg/cm2 Density : 1.84 kg/m3 Working Temperature : -35 Deg C to 150 Deg. C TRANSMITTER: Type : Smart Microprocessor based Remote Field Mounted with Display Display : Required, LCD backlit, alphanumeric Range : User Configurable Flow accuracy (including sensor) : Better than +/-0.15% Flow Repeatability (including sensor) : Better than +/-0.1% Output 1) Analog Output, 4-20 mA DC, HART compatible Output 2) Pulse Output Maximum Load Impedance : <500mohms Power Supply : 110VAC, 50 Hz +/- 10% Display Language : English Display shall have: a) Actual flow rate; b) Flow units : T/hr, kg/hr configurable through front panel keypad c) Totalizer (non-volatile) with Reset facility d) Totalizer units : Tonnes; Kilograms e) Density; f) Density Units : g/cc g) Status/error messages Calibration facility : Required through front panel keypad and HART communicator Configuration : Required through front panel keypad and HART communicator Protection with : Required for Calibration/ access code configuration/setup data Memory : Non-volatile EEPROM Self-Diagnostics : Required Empty or Partially filled flowtube detection : Required Cable entry : 1/2 NPTF Junction box/ terminal box material : Die Cast Aluminium Enclosure : Weather proof to IP 67 Mounting Brackets : Required, SS304 for pipe mounting Working Temperature : 0 to 55 Deg.C Humidity : Up to 95%(RH) SENSOR: Type : Coriolis type, enclosed in a hermetically sealed housing Meter size and pressure rating : Vendor to specify End connection : Flanged, RF Flow tube/Wetted Parts Material : Hastelloy C or better suited for the process fluid Housing Material : SS304 Junction box/terminal box material : Die Cast Aluminium Interconnection cables between Sensor and Transmitter : 25 metres required Distance between sensor & transmitter : 25 m (maximum) Interchangeability of Sensor and Transmitter : required Instrument details : To be punched on SS plate mounted on sensor and transmitter. Explosion proof certification required for Sensor and Transmitter Hydraulic test pressure : 1.5 times Maximum Working Pressure Painting : As per manufacturer’s standard.

Mass Flow Meter, Coriolis Type Process Conditions: Flowrange in Tonnes /Hour : 0-15 End connection : 1 , ANSI 300 Service : Liquid Ammonia Working Pressure : 10 kg/cm2 Density : 0.6814 to 0.6453 g/cc Working Temperature : -35 Deg C to 150 Deg. C TRANSMITTER: Type : Smart Microprocessor based Remote Field Mounted with Display Display : Required, LCD backlit, alphanumeric Range : User Configurable Flow accuracy (including sensor) : Better than +/-0.15% Flow Repeatability (including sensor) : Better than +/-0.1% Output 1) Analog Output, 4-20 mA DC, HART compatible Output 2) Pulse Output Maximum Load Impedance : <(><<)>500mohms Power Supply : 110VAC, 50 Hz +/- 10% Display Language : English Display shall have: a) Actual flow rate; b) Flow units : T/hr, kg/hr configurable through front panel keypad c) Totalizer (non-volatile) with Reset facility d) Totalizer units : Tonnes; Kilograms e) Density; f) Density Units : g/cc g) Status / error messages Calibration facility : Required through front panel keypad and HART communicator Configuration : Required through front panel keypad and HART communicator Protection with access code : Required for calibration/configuration/setup data Memory : Non-volatile EEPROM Self-Diagnostics : Required Empty or Partially filled flow tube detection : Required Cable entry : 1/2 NPTF Junction box/ terminal box material : Die Cast Aluminium Enclosure : Weather proof to IP 67 Mounting Brackets : Required, SS304 for pipe mounting Working Temperature : 0 to 55 Deg.C Humidity : Up to 95%(RH) SENSOR: Type : Coriolis type, enclosed in a hermetically sealed housing Meter size and pressure rating : Vendor to specify End connection : Flanged, RF Flange to Flange Distance : 450 mm (Approx) Flowtube/Wetted Parts Material : SS316L Housing Material : SS304 Junction box/ terminal box material : Die Cast Aluminium Interconnection cables between Sensor and Transmitter : 25 metres required Distance between sensor <(>&<)> transmitter : 25 m (maximum) Interchangeability of Sensor and Transmitter : required Instrument details : To be punched on SS plate mounted on sensor and transmitter. Explosion proof certification required for Sensor and Transmitter Hydraulic test pressure : 1.5 times Maximum Working Pressure Painting : As per manufacturer’s standard.

Mass Flow Meter, Coriolis Type Process Conditions: Flowrange in Tonnes /Hour : 0-100 End connection : 3 , ANSI 300 Service : Liquid Ammonia Working Pressure : 10 kg/cm2 Density : 0.6814 to 0.6453 g/cc Working Temperature : -35 Deg C to 150 Deg. C TRANSMITTER: Type : Smart Microprocessor based Remote Field Mounted with Display Display : Required, LCD backlit, alphanumeric Range : User Configurable Flow accuracy (including sensor) : Better than +/-0.15% Flow Repeatability (including sensor) : Better than +/-0.1% Output 1) Analog Output, 4-20 mA DC, HART compatible Output 2) Pulse Output Maximum Load Impedance : <(><<)>500mohms Power Supply : 110VAC, 50 Hz +/- 10% Display Language : English Display shall have: a) Actual flow rate; b) Flow units : T/hr, kg/hr configurable through front panel keypad c) Totalizer (non-volatile) with Reset facility d) Totalizer units : Tonnes; Kilograms e) Density; f) Density Units : g/cc g) Status / error messages Calibration facility : Required through front panel keypad and HART communicator Configuration : Required through front panel keypad and HART communicator Protection with access code : Required for calibration/configuration/setup data Memory : Non-volatile EEPROM Self-Diagnostics : Required Empty or Partially filled flow tube detection : Required Cable entry : 1/2 NPTF Junction box/ terminal box material : Die Cast Aluminium Enclosure : Weather proof to IP 67 Mounting Brackets : Required, SS304 for pipe mounting Working Temperature : 0 to 55 Deg.C Humidity : Up to 95%(RH) SENSOR: Type : Coriolis type, enclosed in a hermetically sealed housing Meter size and pressure rating : Vendor to specify End connection : Flanged, RF Flowtube/Wetted Parts Material : SS316L Housing Material : SS304 Junction box/ terminal box material : Die Cast Aluminium Interconnection cables between Sensor and Transmitter : 25 metres required Distance between sensor <(>&<)> transmitter : 25 m (maximum) Interchangeability of Sensor and Transmitter : required Instrument details : To be punched on SS plate mounted on sensor and transmitter. Explosion proof certification required for Sensor and Transmitter Hydraulic test pressure : 1.5 times Maximum Working Pressure Painting : As per manufacturer’s standard.

Emerson Process Management (India) Private Limited