Providing and fixing Furniture for B Type 18 Tower 504 Quarters in Sector 29 at Gandhinagar

No figures

1 Providing and fixing modular wardrobe with loft using 16–18 mm thick 4748.00 Sqmt 9545.17

calibrated BWR grade plywood conforming to IS 710, complete as per

approved drawings and Engineer-in-Charge instructions. All exposed inner

faces and niche openings finished with 0.8 mm laminate, and shutters

finished on both sides with high-pressure decorative laminate (HPL).

Shutters and panels bonded using marine grade adhesive, ensuring smooth,

even and aligned finish. All exposed edges sealed with 1 mm thick PVC edge

banding using automatic edge banding machine with pre-milling process.

Shutters fixed with auto-closing concealed hinges with clip-on mechanism

and full adjustability for proper alignment. Including all hardware such as SS

handles, magnets, fasteners, door straighteners and accessories of approved

Complete fabrication, supply and installation including adhesives, labour,

tools, transport and finishing, ensuring level, aligned and defect-free work.

Measurement in sqm of front elevation area, complete in all respects as per

specifications and approved design.

Item Rate In

Description of Item Quantity Unit Amount

No figures

2 Providing and fixing modular kitchen cabinet work, constructed using 16–18 1028.00 Sqmt 30432.09

mm thick calibrated BWR grade plywood conforming to IS 710, including

partitions, shelves, 5- drawer components, finished with 0.8 mm thick

decorative laminate on external surfaces and 0.8 mm thick non-decorative

laminate on internal surfaces. All exposed edges shall be sealed with PVC

edge banding of approved make. The work shall include providing and fixing

tandem drawer systems (including standard and pot & pan units) of

approved make list, along with heavy-duty concealed hinges, stainless steel

handles, and all necessary hardware fittings. Drawers and shutters shall be

properly aligned and finished with smooth operation. The item shall include

all fixtures, fasteners, adhesives, labour, fabrication, transportation,

installation, wastage, and complete finishing as per approved drawings and

instructions of the Engineer-in-Charge.

Total Rs.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

1 no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design

4 the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

Deputy Executive Engineer Executive Engineer

Capital Project Sub Division: 11 Capital Project Division:

Gandhinagar Gandhinagar