PMABHIM

Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2.00 in loamy and clayey soils like B.C. Soils, red earth & Ordinary Gravel (SS 20-B) including shoring, strutting, sheeting, planking, dressing of sides and bottom and backfilling in trenches with excavated suitable material including cost of hire charges of T & P, labour charges and including contractors profit and overhead charges but excluding GST and Seigniorage Charges etc., complete for finished item of work for foundation of buildings. (APSS No. 308)

Filling in basement with HBG stone chips of 2.36 mm and below from approved quarry/ available sources including all operational, incidenal, labour charges, sales tax and other taxes, hire charges of T & P etc., complete (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site, contractors profit and overhead charges but excluding GST and Seigniorage Chargesetc., complete for finished item of work. (APSS NO. 309 & 310) for finished item of work.

Plain Cement Concrete of (1:4:8) propoportion nominal mix (Cement: Fine Aggregate: Coarse Aggregae) using 40mm size HBG M/C (SS5) metal with concrete mixture including cost and cofnveyance of all materias like cement, sand (unscreened), Coarse aggregate, water etc., to site, all operational, incidental and labour charges such as mixing, laying and ramming concrete in nlayers in position not exceeding 15cm, finishing top surface, curing concrete, overhead charges & Contractors profit etc., complete but excluding GST & Seigniorage charges, sales & other taxes on all materials for finished item of work for Foundtions (APSS No. 402)

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for Column Footings.

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for Pedastals

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for Columns

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for Plinth beam

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars Fe 500 grade as per IS 1786-1979 of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, tying including sales and other taxes on all materials and including contractors profit and overhead charges etc., complete for finished item of work. ( APSS No.126)

Providing Brick work In CM (1:6) prop using common burnt clay bricks of cass as per Table-1 of IS: 1077-1992 Non -Modular or traditional size 23X11X7 cm from approved source including cost and conveyance of all materials and labour charges, centering and Scafolding charges and overhead charges and contractors profit but excluding GST etc., complete as per APSS No. 501 for Basement and others but excluding GST and seigniorage charges.

Brick masonry in superstructure with CM (1:8) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit but excluding GST etc., complete for finished item of work. (APSS No. 501 & 504). for superstructure.

Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 504)

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for Lintels

RCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of workfor sunshades of 0.60 meters wide and 0.075 meters thickness at fixed end and 0.05 meters thickness at free end.

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for Roof level beams.

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for roof slab of 125 mm thickness.

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for roof slab of 100 mm thickness.

Reinforced Cement concrete (1:3:6) using 40 mm HBG graded metal from an approved quarry including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site including machine mixing charges and curing charges, lift charges and centring charges and including contractors profit and overhead charges but excluding GST etc., complete for finished item of work for dummy columns over ground floor roof slab.

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) proportion 20 mm thickness (average) mixed with water proofing compound @ 1Kg/1 bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45 cm x 45 cm including cost and conveyance of all materials, all labour charges and contactors profit and ovehead charges but excluding GST etc., complete for finished item of work (APSS No. 901 & 903).

Ornamental plastering with CM (1:3) mix 12 mm thickness in single coat for exposed surfaces of RCC with neat finish including cost and conveyance of all materials like cement, sand, water etc., to site, other taxes on all materials, all operational, incidental such as scaffolding charges including cutting of grooves, finishing, curing, including contactors profit and ovehead charges but excluding GST etc., complete etc., complete for for finished item of work.

Plastering to brick masonary wall with 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for Internal Walls.

Plastering to brick masonary wall with 20mm thick double coat in CM (1:6) 16 mm thick base coat and CM (1:4) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for Outer Walls

Supply and fixing of medium teak wood fully panelled door of size 1.20m x 2.10 meters frame made of Scantlings of size 75mmx100mm including labour charges for wrought and put up including fixing of frames and shutters in position, fixing of necessary fixtures etc., for fully panelled door external or internal including cost and conveyance of all materials, all labour charges and all fixtures including contactors profit and ovehead charges but excluding GST etc., complete for frames and shutters for finished item of work as per standard specifications (APSS NO.1001 & 1002) (CSSR)

Supply and fixing of country wood fully panelled door of size DOOR FRAME 1.05 m x 2.10 meters frame made of Scantlings of size 75mmx100mm including labour charges for wrought and put up including fixing of frames and shutters in position, fixing of necessary fixtures etc., for fully panelled door external or internal including cost and conveyance of all materials, all labour charges and all fixtures including contactors profit and ovehead charges but excluding GST etc., complete for frames only for finished item of work as per standard specifications (APSS NO.1001 & 1002) (CSSR)

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8 MM rigid layer on all the six surfaces. The door frame will have a rebat of 32 MM. Frame section of 45 mm x 90 mm. The two Vertical members are to be joined together with the horizontal member using 8mm x 60 mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 Nos., of screws to be provided for each vertical member & minimum 2 Nos., for horizontal member including contactors profit and ovehead charges but excluding GST etc., complete for Toilet door.

Cost, supply and fixing of 30 mm thick flush door shutters solid bond wood board type with commercial ply on both faces to the existing door frame of size 1.05 meters x 2.10 meters conforming to IS 2202 including labour charges, including fixing the necessary fixtures to the door shutter including contactors profit and ovehead charges but excluding GST etc., complete for finished item of work for Store room door

Providing and fixing 28-30 mm thick solid Wood Polymer Composite (WPC) single extruded door shutter for door of size 0.75 meters x 2.10 meters with 3 mm top and bottom rigid layer with an overall density of 750 kgs/cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame including cost and conveyance of all materials, all labour charges, all fixtures and all furniture including contactors profit and ovehead charges but excluding GST etc., complete for finished item of work.

Supplying and fixing of MS Iron Window grills/ventilator grills/verandah grills using MS angles for outer frame and fixing of MS square rods as safety rods in both directions including cost and conveyance of all materials, fabrication charges and fixing charges including contactors profit and ovehead charges but excluding GST etc., complete for finished item of work.

Providing and fixing factory made uPVC any colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi -chambered frame with in-built roller track and sash extruded Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi -chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive cost of single/double glass panes, wire mesh and silicon sealent. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm including contactors profit and ovehead charges but excluding GST etc., complete

Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., complete for finished item of work.

Painting to new iron work with two coats of ready mixed synthetic enamel paint Grade-I first quality all shades over a base coat of red oxide primer making total 3 coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powdered materials, including cost and conveyance of all materials, site and other taxes, all operational, incidental and labour charges and contactors profit and ovehead charges but excluding GST etc., complete for finished item of work.. (APSS No.1201, 1207 & 1212) (CSSR)

Providing Flooring with double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and including contrractors profit and overhead charges but excluding GST etc., complete for finished item of work.

Providing skirting to internal walls with double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs etc., complete, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete and including contractors profit and overhead charges but excluding GST etc., complete for finished item of work

Flooring with non-skid red or whit full bodly ceramic floor tiles of size 300 mm x 300 mm and thickness between 7 to 8 mm conforming to IS specifications, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.30 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles and including overhead and contractors profit charges but excluding GST etc., complete for finished item of work.

Providing Dadooing with glazed red or white full body ceramic wall tiles of Size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs in all shades and designs length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water, contractors pfofit and overhead charges etc., complete and including overhead and contractors profit charges but excluding GST etc., complete for finished item of work.

Painting to new interior walls with two coats with Plastic Emulsion paint of Asian/ Berger/ Nerolac or equivelent and shade over a priming coat with cement primer water base interior grade -1 or equavalent quality making total 3 coats to give an even shade after thoroughly brushing the surface to remove all loose powdered materials including cost and conveyance of all materials and water to site, sales & other taxes, all operational, incidental and labour charges such as cleaning the surface, painting and curing and contactors profit and ovehead charges but excluding GST etc., complete for finished item of work. (APSS No.911 & 912)

Painting to new exterior walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making total three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges and curing charges etc., complete for finished item of work. (APSS No. 912)

Providing and fixing factory made uPVC white colour fixed glazed Ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single glass panes and silicon sealant. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed Ventilators made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension including contactors profit and ovehead charges but excluding GST etc., complete for finished item of work

Supply and fixing of Terracotta tiles size 125x200 mm and 12-15mm thick including all labour charges complete including contactors profit and ovehead charges but excluding GST etc., complete for finished item of work

Providing Electrification in VILLAGE HEALTH CLINIC Building

Supply and fixing of 20 mm dia 2.10 mm thickness heavy grade with IS;9537 part 3 FRLS rigid P.V.C. pipes concealed in roof Slabs with all required accessories including masonary work and labour charges, including over head charges and contractor profit but excluding GST charges etc., complete.

Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original including cost and conveyance of all materials and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete.

Supply and fixing of 25 mm outer dia (2.00 to 2.20 mm) thickness outer daiameter heavy grade with IS;9537 part 3 FRLS rigid P.V.C. pipes concealed in walls with all required accessories including masonary work for light, fan and separate plug points with well seasoned wooden deep box including cost and conveyance of all materials and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges, including over head charges and contractor profit but excluding GST charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges including over head charges and contractor profit but excluding GST charges etc., complete.

Supply and fixing of batten holder / angle holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 3.00 Watts LED Lamp including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work. (for new installation).

Supply and run of 2 of 36/0.3 mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply and run of 1 of 14/0.3 mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for earth continuity inlcuding all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing SPN Distribution board with IP-20 protection suitable for 40 A DP Isolator (DP) Isolator as incomer and 6-32 Amp 10kA SP MCBs - 6 Nos. as out goings including internal connections and labour charges for surface / flush mounting, including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing of 20-24W, not less than 1100 mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with F>0.9, Surge protection: 2 KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000 K - 5700 K, minimum CRI>70 including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Cost, supply and fixing of 1200 mm (48") sweep 230 V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings including giving connections, all labour charges for fixing with all standard accessories including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply and erecting of stepped type electronic regulators for ceiling fans of 1200 mm sweep complete erected on existing switch board including all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply, transportation and fixing of 20 Watts LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass including all standard accessories etc., complete including all labour charges for fixing of street light luminaire on wall including giving connections including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Providing independent earthing by excavating trench to a depth of 0.90 meters in all soils as per size specified in data using 25 mm daimeter G.I pipe 'B' class with necessary accessories with hume pipe duly providing staggered holes including filling with equal proportion of salt and chorcoal in layers including cost and conveyance of all materials and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply and Run of 2 of 6 Sq.mm WPSC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges including over head charges and contractor profit but excluding GST charges etc., complete for service mains.

Supply and fixing of single phase meter on new peeta board 1 No. including fixing of 1 No., of 63 A 415 Volts rewirable fuse unit and 20A 1 Way 1 Module Modular Switch with Indicator including giving connections including over head charges and contractor profit but excluding GST charges etc., complete.

Supply and erection of LED indicator lamps on the existing box / panel board including cost and conveyance of all materials and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work. .

Supply and run of 2 of 56/0.3 mm (4.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for earth continuity including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work. .

Providing Water supply and Sanitation arrangements including fixing of Sub-mersible Motor Pump Set

Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., complete for finished item of work. The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time including over head charges and contractor profit but excluding GST charges etc., complete

Supply and erecting of ISI mark 5 star rated submersible motor pumpset 1.00 HP single phase 10 stage conforming to IS 8034 and motor conforming to IS 9283 with water proof winding, pump shall be suitable for various delivery and discharge with stainless steel shaft suitable for 106 mm/156 mm dia borewells with high quality water resistnt and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of single phase 250 V, single phase 50 HZ AC power supply copper winding with water proof insulation and high precision strength not to be affected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H - type clamp of subitable size and strength including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Cost, fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter including over head charges and contractor profit but excluding GST charges etc., complete.

Supply, delivery, and laying of 32 mm OD 10.00 kgs/cm2 HDPE pipe conforming to IS 4984-1995 including transportation charges and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply of 3 Core 2.50 Sq. mm Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990 including all labour charges etc., complete for finished item of work.

Supply of fixing of SS Nipples of 32 mm x 25 mm diameter stainless steel nipples including cost and conveyance of all materials and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete

Supply and fixing of bore cap of 180 mm dia including conveyance charges including over head charges and contractor profit but excluding GST charges etc., complete

Cost, supply and delivery of 110 mm diameter 6.00 kgs/cm2 test pressure Unplasticised PVC pipes suitable for potable water supplies conforming to IS 4985/200 (3rd revision) as per specifications including labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., including fixing with necessary fittings like bends, plugs, couplers, juctions, tees etc., with solvent jointing as per standard practise including cost and conveyance of all materials including over head charges and contractor profit but excluding GST charges etc., complete to site for finished item of work at all floor levels.

Cost, supply and delivery of 75 mm diameter 6.00 kgs/cm2 test pressure Unplasticised PVC pipes suitable for potable water supplies conforming to IS 4985/200 (3rd revision) as per specifications including labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., including fixing with necessary fittings like bends, plugsm couplers, juctions, tees etc., with solvent jointing as per standard practise including cost and conveyance of all materials to site for finished item of work at all floor levels including over head charges and contractor profit but excluding GST charges etc., complete

Supply and fixing of 22.20 MM OD pipe premium make Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work at all floor levels.

Supply and fixing of 28.60 MM OD pipe premium make Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work at all floor levels.

Supply and fixing of 34.90 MM OD pipe premium make Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work at all floor levels.

Supply and fixing of European water closet of 1st quality conforming to IS: 2566 Part - 2, 1973 white glazed with S Trap including fixing of best indian make plasti seat and lid for european water closet with rubber or plastic buffers as per IS 2548-1966, PVC low level system with internal components and short bend 8 litres capacity single flush, 19.05 mm heavy duty NP stop cock Indian make with ISI mark, C.P. flange, PVC flexible pipe including cost and conveyance of all materials to site and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing of Orissa Pan white glazed water closet of size 580 mm x 440 mm 1st quality conforming to IS: 2566 Part - 3, 1981 of makes Hindustan/Nycer/Parryware white glazed with P OR S Trap including cost and conveyance of all materials to site and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing of Indian make flat back Wash Hand Basin 1st quality conforming to IS: 2566 Part - 4, 1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. fitting with parallel pipe thread conforming to IS 2963-1979 and fitted with 15 mm nominal bore chromium plated pillar tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block 450 mm x 300 mm single CP Pillar cock including fixing of 19.05 mm heavy duty NP stop cock Indian make with ISI mark, C.P. flange, PVC flexible pipe and including cost and conveyance of all materials to site and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing of 12.7 mm N.P bib tap Indian make heavy duty short body including fixing of CP flange including cost and conveyance of all materials and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base suppport for tanks conforming to IS 12701-1996 including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing NP soap dish heavy type with NP screws including all charges including over head charges and contractor profit but excluding GST charges etc., complete.

Cost, supply and fixing of 20 mm diameter PPR ball valve conforming to DIN standards 8077/8092 including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Cost, supply and fixing of 25 mm diameter PPR ball valve conforming to DIN standards 8077/8092 including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

(No.of items 76 only)