REPAIRS TO FLOORING IN OTM AND MD ACCN AT ZONE A AND UNDER GE (ARMY) TRIVANDRUM

Amount

Demolition of cement concrete (unreinforced) including tiles and screed bed of any description in any position not otherwise specially provided for complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

M&L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded stone aggregate as in sub-base for flooring/ levelling coarse, sunken floor etc. complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:4 for lying floor finishes (upto four storey buildings) complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster in cement mortar 1:3 as backing coat for fixing wall finishes over stone masonry or other than fair faces of brick work/ PCC solid block masonry/ concrete (upto four storey building) complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x 200x 7mm/ 450x 300x 7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item ser No 11 here-in-before but as in vertical surface (dado/Skirting) to match the shade of floor tiles laid complete all as specified and directed.

M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing complete all as specified and directed.

M&L for virified ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 Type C-2 (using 40mm graded stone aggregate) as in sub base floor complete all as specified and directed.

M&L for Chequered cement concrete tiles 300 x 300 x 20-25 mm thick, coloured set, jointed and pointed in neat cement slurry in floors with gray cement and pigment complete all as specified and directed.

Demolition of brick work/ PCC block/ stone wall masonry built in cement mortar and removing the debris/ rubbish to a distance not exceeding 100 mtr complete all as specified and directed.

M&L for pre-cast cement concrete block masonry type C1, 1:3:6 using 20mm graded stone aggregate with solid blocks exceeding 10 cm in width and setting in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster on fair faces of brick work/ concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete type C2, 1:3:6 using 40 mm graded stone aggregate as in plinth protection, hard standing, etc. finishing surface even and smooth without using extra cement complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing the same opening after necessary easing and adjusting complete all as specified and as directed.

Taking up or down 15mm bore steel/ 16mm bore PVC tubing and connections, and refixing the same in new or old position (Walls, ceiling, flooring etc.) including cleaning complete all as specified and directed.

Cutting chases in concrete block walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs vitreous China wash down closet pan of size 540 x 375 x 15mm 'P' or 'S' trap (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets for support, and connection to pipes and fixing in chain and pull or lever with PVC connections 20mm size with PTMT nuts of lenght 600mm complete all as specified and directed.

S&F in repairs health faucet, brass, chromium plated including flexible PVC pipe with steel lining of 1 mtr long, chromium plated, with push button suitable for 15mm pipe complete all as specified and directed.

S&F in repairs 15 mm bore dia. angle cock/ stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs stop valves 15 mm bore dia, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs two way bib tap of size 15mm bore dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed in both ends for pipe or union fixed complete all as specified and directed.

S&F in repairs PVC connections 15mm size with 02 Nos brass check nuts with washer of length 600mm complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm including cutting for and pinning in ends of brackets or erecting stand and connected fittings including PVC connections 15/20mm size with PTMT nuts of length 600mm complete all as specified and directed.

Fixing only Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as pecified and directed

M&L for 32 mm dia. waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including taking down old existing waste fittings complete all as specified and directed.

S&F in repairs pillar taps of size 15mm bore dia, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed

S&F in repairs bib tap of size 15mm bore dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Demolition and breaking up drain pipes of dia 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including necessary bend, T and other accessories complete all as specified and directed.

S& F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary clamps etc complete all as specified and directed

S& F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary clamps etc complete all as specified and directed

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and directed.

S&F PVC (SWR) floor trap, outlet 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for providing cement concrete type C1, 1:3:6 using 20mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Taking down 20mm steel/CPVC tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Supplying and laying of CPVC pipes 20mm dia outer bore SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S&F in repairs shower rose, brass, chromium plated 125mm size with or without swivel joints, fixed to steel pipe or union complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S&F in repairs stainless steel tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete all as specified and directed.

VIJAYA ENTERPRISES (BID ID -3172959)

M/S AMBATTU CONSTRUCTIONS (BID ID -3173692)

JEETH CONSTRUCTION (BID ID -3172152)

SCION ENTERPRISES (BID ID -3174598)

M/S Vadakkeparambil Electro-Mechanic Service (BID ID -3173402)

B.LAMBODHARAN (BID ID -3170931)

U K construction (BID ID -3171735)