GENERAL-Installation of 10HP and 15HP submercible motor pump sets in Nallurpully and Kanamkode DWSS (P.No.18/24) in Alanallur GPInstallation of 10HP and 15HP submercible motor pump sets in Nallurpully and Kanamkode DWSS (P.No.18/24) in Alanallur GP-G

Amount

Installation of 10HP and 15HP submercible motor pump sets in Nallurpully and Kanamkode DWSS (P.No.18/24) in Alanallur GP

90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point

90.3.18.1:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps

90.3.22.3:Supply & installation of light fittings on flat iron bracket <br> Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA sheet of .5mm thickness complete with all accessories and lamps etc. directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

90.6.6.5:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.10 sq mm

90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

90.14.28.6:S & F Motor starters of the following ratingsFully automatic star delta starter for 15HP motor

90.14.24.31:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 440 V, Metalised Poly Propylene Heavy duty Cylindrical Gas filled Capacitor suitable for APFC panel without block reactor.

90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD339705/2023-2024:Supply and providing12x3mm brass nut and bolt etc.as required.

OD339706/2023-2024:Supply and providing 25 x 6 mm brass nut and bolt etc.as required.

OD339707/2023-2024:Supply and providing earth lead from the test joint to the earth electrode using 25 x 3 mm GI strip of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate,test joint etc. as required.

OD339708/2023-2024:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2 metre long etc. with charcoal/ coke as required.

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.2.1:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD339710/2023-2024:Supply and renewing analog volt meter of accuracy class 1 for existing panel board including all labour charges

OD339711/2023-2024:Supply and renewing analog Ameter for existing panel board including all labor charges

OD339712/2023-2024:Supply and renewing SPP in the existing panel board all labour charges etc

OD339719/2023-2024:Supply, installation, testing and commissioning of indication lamp(R,Y,B) in the existing panel as required

2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

OD341962/2023-2024:Lifting the submersible motor with pipe with out damage, using necessary chain pully etc. including all charges.

OD339757/2023-2024:Lowering the submersible motor with pipe with out damage, using necessary chain pully etc. including all charges.

OD341716/2023-2024:Charges for transportation of 10HP submercible motor pump set, weighing about 150kg, from the point of purchase for about 30 kilometers by lorry, and leading from lorry to the pump house for about 250 meteres along a narrow inclined pathway carefully, without damage, including all charges like unloading and other required materials

OD341718/2023-2024:Charges for transportation of 15HP submercible motor pump set, weighing about 200kg, from the point of purchase for about 30kilometers by lorry and leading from lorry to the pump house at about 300meteres, along a narrow inclined pathway carefully, without damage, including all charges like loading and unloading and other required materials

OD341761/2023-2024:Supply, conveyance, erection, testing and commissioning of 10HP motor with pump coupled, 415V, 2880rpm, 10 to 20m head, 1000 to 1300LPS discharge, including fixing the foundation bolt on existing block, positioning the motor with pump coupled in proper alignment, including all labour and tools required etc as required. (LUBI/KSB/KIRLOSKAR or equivalent)

OD341776/2023-2024:Supply, conveyance, erection, testing and commissioning of 15HP motor with pump coupled, 415V, 2880rpm, 10 to 20m head, 1000 to 1300LPS discharge, including fixing the foundation bolt on existing block, positioning the motor with pump coupled in proper alignment, including all labour and tools required etc as required. (LUBI/KSB/KIRLOSKAR or equivalent)

Sanju Rajan

Bidder Name

YAHKOOB M K

Sanju Rajan