CLEANING OF SERVICE OH TANKS INCLUDING REPAIRS REPLACEMENT OF RCC WATER TANK GI PIPE AND OTHER ALLIED WORKS IN ZONE A AREA OF AGE BR I AT AHMEDABAD CANTT

Amount

M&L for demolition of RCC Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) all as specified and directed

M&L for demolition of PCC of any description and in any position not otherwise specifically provided for all as specified and directed

Taking up or down steel tubing and connections of following size from any position including cleaning for refixing or removing from site and removal from site

15mm bore of pipe

20mm bore of pipe

25 mm bore of pipe

Supply & Fixing for medium grade GI tubing of following dia bore including supplying and fixing of all tube fittings such as bends, elbows, tees, short pieces, connections , caps, plugs and unions etc and fixed complete with clamps, wall hooks, wooden plug etc fixed to walls or in floors, ceiling, concealed and making good disturbed surfaces complete all as specified and directed.

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

All as per item No 4 above but refixing old steel tubing and connections in new or old position ie on Walls, ceiling or laid on floor etc.

15mm bore of pipe

20mm bore of pipe

(c) 25 mm bore of pipe

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

250 ltrs to 700 ltrs capacity.

1000 ltrs capacity

Supply & Fixing for rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) of following capicity hoisted and fixed in position making connections incl supply & fix of required unions nipples and other accessories complete all as specified in SSR and directed.

500 ltrs capacity.

1000 ltrs capacity

S&F in repairs 15mm dia Bib taps, with Chromiun plated crutch or butterfly handle screwed down,for iron pipe or brass ferule complete all as specified and directed. (conforming to JAINKO Cat no. BTJ-1 or eqivalent)

S & F in repairs 15mm dia 2-in-1 bib tap with angle valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions. (conforming to JAINKO Cat no. BCJ-4 or its equivalen make)

Supply & Fix in repairs standard bib tap 15mm dia bore of PTMT of any colour high pressure screwed for iron pipe (minimum weight 90 gms)

Supply & Fix in repairs standard stop cock 15 mm dia bore of PTMT of any colour high pressure screwed for iron pipe (minimum weight 90 gms)

S&F in repairs 15mm dia pillar taps, cast copper alloy with capstan heads chromium plated screwed down, high pressure with long screwed shanks and fly nuts, screwed for iron complete all as specified and directed. (conforming to JAINKO Cat no. PCJ-1 or eqivalent)

S & F in repairs 15mm dia stop valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions.

All as per item No 12 above but fancy type chromium plated with long shanks and cup (concealed type)

S & F in repair 150mm size brass chromium plated shower rose with sweivel joint, any size, including fixing to steel pipe 15mm dia pipe (conforming to JAINKO Cat no. FSJ-6)

S&F PTMT bathroom cabinet superior quality of size 300 x 400 mm fixed to wall with brass screws

S&Fin repairs tubular towel rail, 20mm dia D type 60cm long between flanges brass chromium plated.

S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets and flush pipe complete

S&F in repairs vitreous china water closet (squatting pan), orissa patern size 580 x 440mm white with integral, foot rests an including 'P' trap and lime bedding making good to floors complete

S & F in repair health faucet spray type jet with brass jet, chromium plated, and 1.5m long PVC flexible pipe complete all as specified and directed (conforming to JAINKO Cat no. HFJ-2)

S & F 20mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repairs (minimum weight of 20mm - 210 gms)

S&F 20mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F 25mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

M&L for providing Cast iron floor trap 75mm dia of outlet with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F in repairs 40mm waste fitting, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed. (conforming to JAINKO Cat no. WFC-2 or equivalent)

All as per item NO 37 above but 32 mm bore dia.(conforming to JAINKO Cat no. WFC-6 or equivelant)

S&F in repairs 100mm waste fitting, brass chromium plated for kitchen sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed. (conforming to JAINKO Cat no. WFC-4 or equivalent)

S&F in repairs 125mm waste fitting, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed. (conforming to JAINKO Cat no. WFC-5 or equivalent)

S & F brass CP Soap dish, 125mm any type, fixed to plugs with chromium plated brass screws (conforming to JAINKO Cat no. SDJ-1 or equivalent)

Dismanting floor, hearth or wall tiling including cement mortor bedding but not backing removing serviceable tiles to store and rubbish off the premises

M&L for non skid ceramic coloured tiles 7 to 8mm thick (sqare or rectanglular) area of each tile exc 0.06 sqm but not exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including secreed bedding layer 15mm in CM 1:6 etc complete.

M&L for glazed ceremic tiles on vertical surfaces coloured 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement match over and including rendering as backing 10mm thick in CM 1:4 complete

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed by the Engr -in- Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound including finishing the surface even and smooth without using extra cement ( Note ; Integral water proofing compound shall be measured and paid separately).

M&L for 15 mm thick rendering in CM (1:6) on surfaces other than fair faces of brick/ concrete surfaces and plastered surfaces finished even and smooth without using extra cement.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over chalk whiting and a coat of primer all as specified

M&L preparation of new plastered surfaces on walls and applying two coats cement base paint over one coat of primer on walls

M&L for cleaning disinfectant liquid/bleaching and removing all scale and dirt etc from tank and from mouth of circulating pipe etc for water tank capacity exc 250ltr & n exc 700 ltr

M&L for cleaning with disinfectant liquid/bleaching and removing all scale and dirt etc from tank and from mouth of circulating pipe etc for water tank capacity exc 700ltr & n exc 1000 ltr

S&F in repair plastic Tank cover coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repairs

M&L for cutting holes or through brick / RCC wall built in CM and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required, superficial area exc 150 sqcm but n.exc 400 sqcm

M&L for proiding cement concrete 25mm thick type B0 1:2:4 (12.5mm graded aggregate) as in padding for roof/floor complete all as specified and directed

M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 to ends of landings, steps, cills sunshades, shelves lintels etc

M&L for Cutting chases, pinning in, making good in cement mortar 1:6 to facings where required , for concealed water tubings etc, cutting not exc 10 cm girth.

M&L for water proofing treatment to non assessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @3% by weight of cement & applying one coat of bitumenous primer @ 0.30 kg/sqm & laying APP based polymeric modifed membrane with polyster non woven reinforced of weight not less than 3kg/Sqm of 3 mm thick with polythene finished sealing with side overlaps of 75mm & 100 mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes approved by the Engr-in-Charge.

Note :- The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 Sqm each

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and all as specified and directed by engineer-in-charge.

S/F factory made flyproof mesh panel pvc door shutter 30 mm thick (Style) consisting of frame made out of M.S. frame shall be covered with heat moulded wood grain printed PVC 'C' chanel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, all as per specification & drawing and SS wire gauzed i.e. panel will be of SS wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be screwed to M.S. tubes. The wire gauge shall be stretched to tighten firmly, all as directed by Engr-in-charge.

yesh construction

VIJAY CONSTRUCTION CO

Shree Krushna Supply Corporation

UNIT ENGINEERS

divyarsh entrprise

Shreeganesh Construction