AMC for Replacement of defective LED fixtures in the jurisdiction of AE(Elec.)-SSKM section for the year of 2026-27

PART-A (Tender)

Supply and Fixing of 4 feet T5, 18W LED Batten type fitting with Internal driver with Polycarbonate housing & PC diffuser suitable to operate on 230V AC, 50 Hz power supply as per the following specification.

Make: Philips / Osram / Havells / Crompton Greaves / GE / Orkus.

Specifications:

1. Input Power: 18W ±5%

2. Input Voltage and Frequency:

3. Power factor : >0.95

5. Operating Voltage : 140 - 270 VAC

6. Surge Protection : ≥ 2.5 kV

7. LED make: Nichia (Japan) / Osram (German) / Philips Lumiled / Cree (USA) / Bridgelux (USA) / Seoul / Lednim / Everlight / Epistar / Edison.

8. Luminous Flux (Lumen) : 1800 ± 5%

9. Luminous Efficiency (LM/W) : 100 ±5%

10. Colour Temperature (K): 5500Kto 6500K

12. LED Beam Angle : >150º

13. IP Grade: IP20

Warranty : 5 Years.

Standards Applicable: IS: 10322 Part-5, Sec-3.

Manufacturers internal Type Test Reports. (Excluding GST)

Supply, Installation, Testing and commissioning of LED water proof light fixture 16W Linear LED IP65 Batten with a nominal system lumen output of 2100 lumens and a minimum system efficacy of 120 lm/W. System wattage should not exceed 16W. The luminaire shall have a rated system life time of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. Operating temperature : 10 Degrees to 50 Degrees. Driver of the luminaire shall have THD < 20% and PF > 0.95. The luminaire housing should be made of Polycarbonate Extrusion. The driver shall comply to IEC 60598, IEC 62384, IEC 61347-2-13, IEC 61547, EMI- CISPR15 standards. Make & Model : Philips WT150C LED 20S 6500 PSU L120 / Equivalent model in ENDO / ERCO

Supply, Installation, Testing and commissioning of high quality integrated LED Luminaire with a system lumen of 11,000 Lm and system wattage of 90 W with an efficiency 120 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be top openable & of high quality pressure die cast aluminum LM6 Alloy with PF > 0.95 and THD < 10% & Surge Protection of 4KV but with external SPD upto 10KV. Input voltage of 120-277V. Life time of 50K hours @ L70. Product should be suitable for continuous operation (16-18 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 10.

The luminaire should have Integrated peanut optics to provide a high quality glare free lighting system. The luminaire should be compliant to CISPR 15 & IES 61547 (EMC, EMI compliant). The Driver should be potted / encapsulated & should be a BIS approved driver and not a printed circuit board without casing, mounted inside the luminaire. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. It should have a provision of 10KV series SPD. BIS approval for Both Driver and the luminaire needs to be submitted for records.

Make & Model : Philips BRP333 LED 110CW R5C FG PSU S1 / Equivalent model in ENDO / ERCO

Supply, Installation,Testing and commissioning of high-quality integrated LED Luminaire with a minimum system lumen of 18,000 lumens and system wattage not exceeding 150W with an efficiency 120 lumen/watt. CCT of 5700K with SDCM of < 5. It should have uniquid integrated peanut lens. The housing should be of high-quality pressure die cast aluminum with PF > 0.95. Input voltage of 220-240V and has Auto Voltage cutoff, 50/60HZ. Serviceability Luminaire driver, Life time of 50K hours @ L70. It should have U bracket mounting arrangement. The Ingress protection should be minimum IP 66 with an IK rating of 09. The luminaire should have dual optics to provide a high-quality glare free luminaire.The luminaire should be compliant to CISPR 15 & IES 61547 (EMC, EMI compliant) Outdoor: -40°C < Ta< 50°C; Approbation CQC/CB/CE; BIS approval for Both Driver and the luminaire needs to be submitted for records. Make & Model : Philips BVP283 LED180 CW FG SY5WB 180W PSU / Equivalent model in ENDO / ERCO

Supply of high quality integrated LED Luminaire with a minimum system lumen of 23,500 lumens and system wattage not exceeding 195W with an efficiency 120 lumen/watt. CCT of 5700K with SDCM of less than 5. It should have unique integrated peanut lens. The luminaire must have asymmetrical wide beam of Approximately 110D. The housing should be of high-quality pressure die cast aluminium with PF greater than 0.95 and Surge Protection of 10KV external SPD. Input voltage of 230-440V and has Auto Voltage cut off, 50/60HZ.Serviceability Luminaire driver, Lifetime of 50K hours at L70. It should have U bracket mounting arrangement; The Ingress protection should be minimum IP 66 with an IK rating of 09. The luminaire must be made of pressure die cast Aluminium. with Exposed Lens Optics: Polycarbonate. The luminaire should have dual optics to provide a high-quality glare free luminaire.. BIS approval for Both Driver and the luminaire, LM79 and LM80 reports needs to be submitted for records.

Make: Philips Model:BVP483 LED227 CW AWB A1 PSU GR SPD

Supply and transportation of LED Driver as per IS 15885 (Part 2 / Sec 13)..2012 with input line voltage 120V-270V AC, 50Hz with surge protection more than 2.5 KV, IP20, suitable for …….. LED indoor luminaire, with 2 Years Warranty.

Makes: Philips /Crompton / Bajaj/ Havells/ Surya/Greenlites / HPL/ Halonix / Jaquar/ Ib LED / promtec / Eveready.

Supply and transportation of LED Driver as per IS 15885 (Part 2 / Sec 13)..2012 with input line voltage 120V-270V AC, 50Hz with surge protection of 4.0 KV, IP20, suitable for following LED street light fitting with 2 Years Warranty.

Makes: Philips /Crompton / Bajaj/ Havells/ Surya/Greenlites / HPL/ Halonix / Jaquar/ Ib LED / promtec / Eveready/ Stanjo/ Proilite

Supply and fixing of........ heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high power LEDs, having System Efficacy of > 100 lumens / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete with earth connection and not less than two years warranty. Makes: a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton /

wipro / Bajaj / Havells / Halonix/ Jaquar/HPL/GM / Greenlites/ Gold Medal/ Eveready/ Fortune Arrt/ Rhino/panosonic

b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG/ Everlight

Supply and fixing of........ LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) :

2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of > 100 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with earth connection and not less than two years warranty.

Makes: a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / wipro / Bajaj / Havells / Halonix/ Jaquar/HPL/GM / Greenlites / Gold Medal/ Eveready/ FortuneArrt

b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG/ Everlight

36W/40W (600mm x 600mm) square type

Supply and Transportation of 40W LED Post top lantern made with cast Aluminum with decorative opal polycarbonate diffuser with IP 65 protection etc., complete with all accessories with not less than two years warranty. Makes: Crompton LPTO-40-CDL-M/ Bajaj celesta BGCL 40 w LED wh/wipro LP 02 or equivalent in Phillips/ Keselec/ Havells Endura Spring/ Rhino(GPLP14)

Supply of 39-40 W LED Well glass fitting, with the following specifications: Makes:Philips/TTD Approved Brands.

Optical Parameters :Wattage:39 - 40 W Lumen Output:4400 ± 5 % lm System Efficiency:>110 lm/W CRI:>= 70 Colour Temperature(K):5500-6500 Electrical parameters : Surge Protection:Upto 4 kV ,Power factor:> 0.95, Operating Voltage:160-325 VAC, Operating Frequency:50±3 HZ, Mechanical parameters : IP grade:IP 66 Housing:Pressure diecast aluminium ,THD:≤10% Life:50000 Hrs Warranty:5 Years ,Wiring:The fitting should be supplied with in-built 3C x 1.5 Sq.mm wire of length 0.5 Mtr.

Supply of 70W LED Floodlight (Warm White) with IP-65 Protection.

Make : Philips(Model :BVP 161 LED 55/WW70W) / its equivalent in TTD Approved brands. Warranty shall be 2 years against the manufacturing defects from the date of supply.