PROVN OF HARDSTANDING WITH SHED AND MONSOON SHED AT VARIOUS LOCATIONS AT AF STN SAMANA.

Amount

S&F Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe-410-W(Gde E-250) quality A.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240.

S&F Rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment ;conforming to Fe-410-W(Gde E-250) quality A.

S&F Rolled mild steel in Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.; conforming to Fe-410-W(Gde E-250) quality A.

M&L for preparation of New or previously untreated Surfaces of any bdescription, over 10cm in width or girth,not otherwise described and apllying two coats of synthetic enamel paint over a coat of red-oxide complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 1.00 mm thick, Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard/dense soil.

M&L for Cement concrete,type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Cement concrete,type B1 1:2:4 (20 mm graded aggregate) Providing in roof kerbs or mud stops, rounded or chamfered on edges and in coping complete all as specified.

Demolition of Brickwork or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles along with removal of debris to a distance exc 1.5 Km but n.exc 2 km.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Demolition of Cement Concrete(unreinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) along with removal of debris to a distance exc 1.5 Km but n.exc 2 km.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil complete all as directed by Engg-in-charge.

Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as directed by Engg-in-charge.

M&L for 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete.

M&L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) complete.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard / dense soil

M&L for Cement concrete,type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed

M&L for precast cement concrete 1:5:8 (20 mm graded aggregate) solid building blocks exc 10 cm thick,in width(with plain or interlocking joints as directed) set in cement mortar 1:6 complete in walls or pillars all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil.

Removing excavated material (soils) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in Cement Plaster 1:4, finished even and smooth without using extra cement.

M&L for preparation of new plastered surfaces of wall incl pilasters / cornices etc and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489 : 2004 : Alkali & fungal resistant, dirt resistant, exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 Liters/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Litre / 10 Sqm.

M&L for Forming 12mm thick Expansion joints in concrete slab of thickness 150 mm , filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound, Grade ‘A’

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘A’ .

Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including PVC capping & casing not less than 25 mm wide, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including PVC surface type terminal box of suitable size with PVC cover complete.

All as per item No 29 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

Supply and fix industrial 24 inch Air circulating wall fan of metallic body of motor speed 1440 RPM , power consumption of 180 watt , blade sweep 600 mm and number of speed seeting one,single phase suitable for 240 V, 50 Hz supply complete all as specified and directed by Engr-in-Charge.

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete. Note: 2 Runs of main cable and one run earth wire with PVC capping & casing will be measured as one running meter for payment.

Supply and Fix Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal.

S&F Distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 230 volts, double door type, fixed flush to wall complete all as specified and directed.

Supply and fix MCBs single pole 6 to 32 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix MCBs triple pole & neutral, 63 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and Fix Switch piano, flush type single pole, one way 6 Amp.

Supply and Fix Ceiling rose, 3 phase / PVC / polycarbonate, isolated body.

Supply & laying PVC underground cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed

S&F Sheet moulding compound (SMC) junction box of size 280 mm x 170 mm x 130mm, comprising three phase aluminium bus bar and one No MCB SP, 06 Amps "C" type, fixed on pole with mild steel clamps, nuts and bolts complete. .

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft / loose soil all.

M&L for providing dry river sand as in sand cushioning to under ground PVC cable including punning down of sand in layer all as specified and directed. (Note: Work shall be executed as per clause 19.75 of standard schedule of rates part-1 (2009) for measurement purpose thickness of sand after punning down will be considered.)

Supply & laying ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV , Type I , flat size 250 mm X 150 mm X 40 mm in trenches as protection to LT UG cable all as specified and directed.

S&F Tubes 50 mm bore, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors / trenches.

Demolition of Cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) along with removal of debris to a distance exc 1.5 Km but n.exc 2 km.

S&F LED flood Light fitting 200 Watt, system efficiency not less than 100 lumen / watt, IP 66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete. Make :-cat no. JETAVALOURFL200WLED757PINTNBLTG of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

Sagathiya Builders

Jagdamba Engineering