CERTAIN REPAIR TO JOINERY FLOORING PLUMBING AND OTHER BR REPAIR WORKS AT TECH AREA AT AF STATION JODHPUR

Amount

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) and disposing of debris outside MD land complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

Dismantling of wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including hangers & cover fillets/frame work complete all as specified and directed.

Taking down cement plaster on block masonary or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm not exc. 4 Sqm each complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 85 mm single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. [Note: (a) Quoted rate shall deemed to inclusive of necessary M.S. hold fast/ lugs or SS dash fasteners. (b) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.]

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm single rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. [Note: (a) Quoted rate shall deemed to inclusive of necessary M.S. hold fast/ lugs or SS dash fasteners. (b) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.]

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge, specification & drawing all as specified and as directed. [Note: (a) Quoted rate shall deemed to inclusive of necessary S.S screws. (b) Stainless steel butt hinges shall be paid separately.]

S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, specification & drawing all as specified and as directed. [Note: (a) Quoted rate shall deemed to inclusive of necessary S.S screws. (b) Stainless steel butt hinges shall be paid separately.]

S&F stainless steel barrel tower bolts of 150 mm long complete all as specified and as directed.

S&F stainless steel handles 150mm long complete all as specified and as directed.

S&F stainless steel sliding door bolt with hasp, staple bolt type and fixing clips of sheet of 300 mm long complete all as specified and as directed.

S&F stainless steel hinges of size 100 mm complete all as specified and directed.

S&F for stainless steel 150 mm floor door stopper of, with hard drawn steel spring all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm ( +0.2mm ), Window profile with hollow section with multi chamber, Frame (88mm x 52mm), sliding sash (42mm x 67mm), Sliding mesh Sash (42mm x 57mm), Sliding interlock (One vertical length in each shutter) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 +0.2 mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

S&F 5 mm thick sheet glass ordinary quality in square exc 0.50 Sqm in each pane including rubber beading for fixing of glass complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick decorative PVC sheet of approved colour inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

S&F in repair for 12 mm thick WPC (wood polymer composit) board with CNC approved pattern/design cutting of approved colour with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position incl all necessary fittings, adhesive, sealent etc complete all as specified and directed.

S&F 10 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including all stainless steel (Grade 304) patch fittings including handles, lock etc complete all as specified and directed.

S&F in repairs cast iron body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80 kg complete all as specified and directed.

S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F in repair for 5 mm thick coloured ACP (Aluminium composite panel) sheet cladding over MS frame work or any other surfaces including making necessary arrangement for light, vertical , horizontal offset of any size/any pattern complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators, partition etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 12 mm thick solid PVC ply of 1st quality of approved colour fixed with necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screw etc complete all as specified and as directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290 Gde E-165 including dismantling old existing work complete all as specified and as directed.

S&F in repairs 20-25mm bore Stainless Steel curtain rods with 1.00 mm wall thickness in any length including brackets, stops, rollers, pair of end finials per door/window opening etc complete all as specified and as directed .

M&L for precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 including demolition of old existing block masonary complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate in sub floors complete all as specified and as directed.

S&F coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed.

M&L for double charged Vitrified light shade coloured tiles 9-10 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 1.00 sqm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortor 1:6 complete all as specifed and directed.

M&L for double charged Vitrified light shade coloured tiles 9-10 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 1.00 sqm thick in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specifed and directed.

M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/ 450 x 300 x 7mm/ 300x600x 7 mm thick laid over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, treads/risers jambs, pillars, window-cills, cooking platforms including chamfered in exposed edges and like laid over and including screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed.

M&L 75 mm thick plain cement concrete 1 : 3 : 6 type C1 (using 20 mm graded stone aggregate) as in plinth protection laid in pannels including necessary form work, finished even and smooth without using extra cement, joints filled with sand and bitumen mixture in ratio 1:1 complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed.

M&L for 15 mm thick rendering in cement mortar 1:6 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint over and including a coat of red oxide primer all as specified and as directed.

M&L for preparation of new plastered surfaces of walls with applying of 2 to 3 mm thick wall care putty and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including a coat of primer as per manufacturer's specification complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of surface with applying of 2 to 3 mm thick wall care putty and finishing walls with two coat of Premium Acrylic Smooth exterior paint with Silicone additives of required shade over and icluding a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall including preparation of surface with applying of 2 to 3 mm thick wall care putty and finishing walls with two coat of textured paint of required shade of approved colour over and including a coat of primer complete all as per manfacturers instructions andas directed.

M&L for preparation of surface and applying of 2 to 3 mm thick wall care putty and finishing walls with two coat of Acrylic Smooth exterior paint with Silicone additives of required shade over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment on Ceiling and applying two coats of oil emulsion distemper, over and including a coat of primer and a coat of 2mm thick wall care putty complete all as specified and directed.

S&F in repair for 15 mm bore CP wall mixer (3-in-1 ) for mixing hot and cold water with arrangement for both telephonic hand shower and overhead shower with long bend pipe complete all as specified and directed. Make :-Cera cat part No F1005413 (Ruby)/ Johnson Cat Part No T3223C (Fusion)/ Jaquar Cat Part No FUS-29281 (Fusion) or equivalent make as mentioned in Appx 'B'.

S&F in repair for One piece EWC with seat cover and Twin flush fittings of size 640 mm x 350 mm x 725 mm of snow white colour including 220 mm S trap complete all as specified and directed. Make :- Cera cat part No S1013208VS (Cattler) / Jaquar Cat Part No FSS-WHT-29853S300UFSM (Fusion) / Johnson Cat Part No G3907P0103 (VIGO) or equivalent make as mentioned in Appx 'B'.

S&F in repair for counter top wash hand basin of size 520 mm x 450 mm x 200 mm of snow white colour including all necessay fittings etc complete all as specified and directed. Make :- Cera Cat part No S2030101 (Clair) / Johnson Cat Part No P6212PW0401 (Grande) / Jaquar Cat Part No ARS-WHT-39601 (ARIA) or equivalent make as mentioned in Appx 'B'.

S&F in repair for Single lever basin mixer with 450 mm braided connection pipe complete all as specified and directed. Make :- Cera Cat Part No F1005451 (Ruby) / Jaquar Cat Part No FUS-29052B (Fusion) / Johnson Cat part No T3245C (Fusion) or equivalent make as mentioned in Appx 'B'.

S&F in repair for 15 mm bore angle valve fancy type, CP, cast copper alloy screwed down high presure, with wall flange complete all as specified and directed. Make :- Cera cat part No F1005201 (Ruby) / Johnson cat Part No T3210C (Fusion) / Jaquar cat part No FUS-29053 (Fusion) or equivalent. make as mentioned in Appx 'B'.

S&F in repair for 15 mm bore Bib cock fancy type, CP, cast copper alloy long nose with wall flange complete all as specified and directed. Make :- Cera cat part No F1005152 (Ruby) / Jaquar cat part No FUS-29037 (Fusion) / Johnson cat part No T3205C (Fusion) or equivalent make as mentioned in Appx 'B'.

S&F in repair for 15 mm bore pillar cock with aerator CP, cast copper alloy complete all as specified and directed. Make :- Cera cat part No F1005101 (Ruby) / Jaquar cat part No FUS-29001 (Fusion) / Johnson cat part No T3201C (Fusion) or equivalent make as mentioned in Appx 'B'.

S&F in repair for 15 mm bore 2 way CP bib cock with wall flange complete all as specified and directed. Make :- Cera cat part No F1005161 (Ruby) /Johnson cat part No T3208C (Fusion) / Jaquar cat part No FUS-29041 (Fusion) or equivalent make as mentioned in Appx 'B'.

S&F in repair for fancy type overhead shower of size as per below mentioned Cat Part Model Nos including suitable size shower arm with necessary fittings complete all as specified and directed. Make :- Cera Cat part No F7010503AB/ Jaquar cat part NO OHS-35497/ Johnson Car part No S0006C or equivalent make as mentioned in Appx 'B'.

S&F in repair for fancy type telephonic hand shower 105 mm dia with 5 flow, wall hook and 1.5 mtr hose and other fittings complete all as specified and directed. Make :- Jaquar Cat part No HSH-1717/ Johnson cat part No S0017C/ Cera cat part No F7030112AB or equivalent make as mentioned in Appx 'B'.

S&F in repair for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia with SS braided connection pipe not less than 1.0 meter long and ABS wall hook including making connection and fixed in position complete in all respect as specified and directed. Make :- Cera cat part No F8030111AB/ Jaquar cat part No ALD 563 / Johnson cat part No S0030S or equivalent make as mentioned in Appx 'B'.

S&F in repair for towel rack of SS grade 304 with shelf 600 mm including necessary fittings complete all as specified and directed. Make :- Cera cat part No F5014131CH/ Johnson cat part No T1356C/ Jaquar cat part No CAN-1181FHS or equivalent make as mentioned in Appx 'B'.

S&F in repair for Soap Dish of SS grade 304 incl fittings and fixing in position complete all as specified and directed. Make :- Cera cat part No F5014106CH/ Jaquar cat part No AKP-35731P/ Johnson cat part No T3252C (Fusion) or equivalent make as mentioned in Appx 'B'.

S&F in repair for toilet paper holder with flap guard of SS grade 304 fitting with necessary screws complete all as specified and directed. Make :- Cera Cat Part No F5014110CH/ Johnson cat part No T1354C (Delta)/ Jaquar cat part No CAN-1153S or equivalent make as mentioned in Appx 'B'.

S&F in repair for corner glass shelf of size 225x225 mm with SS bars on sides complete all as specified and directed. Make :- Cera Cat part No F5005102/ Jaquar cat part No ACN-1173/ Senitec cat part No 7002048 or equivalent make as mentioned in Appx 'B'.

S&F in repair for mirror of 5 mm thick glass with double coat of protection and longevity grounded edges for safety and silver plating on the back for better reflection including with stainless steel decorative fastener complete all as specified and directed.

S&F in repair for wall mounting shaving mirror 200 mm dia double sided mirror with one side convex mirror 3 mm thick glasss, Double coat for protection and longevity including necessary fitting arrangement complete all as specified and directed. Make :- Cera cat part No B3510126/ Jaquar cat part No CAN-1193N / Hindware cat part No F880009 (Contessa) or equivalent make as mentioned in Appx 'B'.

S&F in repair for wall mounted Sink Mixer with flange with 150 mm long swivel spout and all other fittings complete all as specified and directed. Make :- Cera cat part No F1005501 (Ruby) / Johnson cat part No T3220C (Fusion) / Jaquar cat part No FUS-29163 (Fusion) or equivalent make as mentioned in Appx 'B'.

S&F in repair for PVC connection 15 mm size with brass check nuts of length 450 mm, complete all as specified and as directed.

M&L for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed.

M&L for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed.

M&L in repairs 32mm dia, 800mm long flexible PVC waste pipe complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank of capacity 500 ltrs (Cylindrical vertical with closed top), ISI marked hoisted & fixed in position including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia and Ball valve of 20 mm bore high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 210 gms) including taking down existing tank complete all as specified and as directed.

S&F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and as directed.

S&F 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius 75 mm dia complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius 110 mm dia complete all as specified and as directed.

S&F in repairs CP grating of size 100 mm dia complete all as specified and directed.

S&F in repairs CP grating of size 100 mm dia with waste hole complete all as specified and directed.

S&F in repair for GI grid frame work of Silhouette grooved design for false ceiling fixed with screw suspended with 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as per manufacturers instructions and as directed.

S&F for 5 to 6 mm thick PVC ceiling board fixed in flat surfaces on snap grid frame work including all fittings complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated/plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

VIKAS CONSTRUCTION CO.