Renovation of Govindpur Block Resource Centre of Govindpur Block under Dhanbad Dist

Earth in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts, levelling ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.

Providing clean coarse sand in filling foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm think with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per specification and direction of E/I. (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling ----do-----

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royally all complete as per building specification and direction of E/I. ,

Provid i11g and layi11g in position cement concrete of specified grade excluding th e cost of centeri11g and shutteri11g - All work up to plinth lev el 1:3:6 (1 Cement 3 Coarce sand (zone-III): 6 Grad e stone ag r;regate 40 mm nomi11al size)

Providing R.C.C./P.C.C M-15 with nominal mix of (1:2:4) in Foundation with approved quality of stone stone chips 20 mm to 6 mm size graded and clean course sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I.

Providing designation 75B brick work in C.M. (1:6) in foundation and plinth all complite as per direction of E/I.

Providing designation 75A brick work in C.M. (1:6) in foundation and plinth with approved quality of clea n coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screeninr; materials, raking out joints to 15 mm depth curing, taxes and royalty all complete as per building specication and direction of E/I.

Providing and laying damp proof course 50 mm thic k with cement concrete 1:2:4 {1 Cement : 2 Coarce sand (zone -III) : 4 Graded stone aggregate 20 mm nominal size)

Providing desir;na lion 75 B brick work in C.M. (1: 6) 111 superst ructu re with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening mat erials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and dir ection ofE/I.

Providing R.C.C. M-20 with nominal mix of (1:1.5:3) in Foundation with approved quality of stone stone chips 20 mm to 6 mm size graded and clean course sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I.

Providing R.C.C. M -200 in column with ……. Do……

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shu tteri11g including stru lting, propping removal of form for Foundations, footi11gs, bases of col umns , etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering includ iI1g strutting, proppiI1g etc. and removal of form for Lintels, beams, plinth beams , !',ird ers, bressumers and can tilevers

CenteriI1g and shuttering includiI1g stru tting , propping elc. and removal of form for Weather shade, Chajjas, corbels etc., iI1cludiI1g edges

Providing centering and shuttering including strutting, propping etc. and removal of form of roof slab, etc for mass concrete

Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab beam at the time of casting all complete as per building specifica tion and direction of E/ I.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Taking down old door and window including -----

Taking down chaukhats in window including -----

Taking down chaukhats in doors including -----

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12 mm thick C.P. (1:3) with 1.5 mm neat cement punning ---all complete job as per direction of E/I

Providii1g 12mm thick ce ment plas ter (1:3) with clean coarse sand of F.M 1 .5 with floating coa l of nea t cement i.J1 s kirti ng includ ii1g roundii1g of ju nctions with f1or, curii1g, taxes and royally all complete as per build i.J1 g specification and direction of E/ I

Provid ing 1.5 mm cement punning including curring, carriar;e of water with all leads and lifts as per building specification an d dir ection of E/I

Supp lying fitting and fixing MS grill in handrail with all complele job.

Providing 40mm dia good quality GI Pipe with all complete job.

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement motar (1:3)and joined with grey cement slurry with "A"grade white 15 X15cm tiles.

Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19mm thick (1:2:4) with 12 mm to 6mm size graded stone chips and top layer 6 mm thick (1:2:4) with 6mm down stone chips, in panels including cost of curing, finishing the surface smootl1 by rubbing with carborand um stone,taxes and royally witl1 all complete as per building specification and direction of E/I

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providi11g two coats of synthetic ename l paint of app roved sha de an d mhde over s teel surface includi11g cleani11g the surface th oroughly includiJ1g sca les smokes, grease and sand pa pering including cost of sca ff oldin g' an d taxe s all complete as per buildi11r; sp ecif ica tion and direc tion of E/ I

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

Providing two coat of snowcem of approved shade and mak e over a coat of ce men t primer on new su rface i.J1cludi.J1g preparin g the plastered surface smootl1 with sand paper, scaffold i.J1g, cu rin g a nd taxes all compl e te as per building specification and direction of E/ I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and layi11g hydraulically mach i11e pressed ter razo tiles 20111111 thick of approved texture with 4mm down marble chips of app rove d shade, size and quality, laid on 19mm. thick bed of lime mortar (1:1:1) (lime:surkhi:sand) with neat cement slurry mixed with pigmen t to match the shade of tiles betwee n joints, including rubbing nnd pol is h in to rnn o \ ith ic finish '\Vith 0-p p rov e d q u " \ it y of carbor a ndum stone i11cludin g cost of cu ring , royal ty and taxe s a ll com ple te as per buildi11g specification and direction of E/ 1. (a) Crey colour with 100 % o rdinarv cement

Provinding tor steel reinforcement of 8mm to 16 mm dia bars cutting, bending and binding with annealed wire with cost of wire removal of roots, placing the rods in postion as per approved design and drawing all coomplete as per direction of E/I. Qty vide item no 5,6,9,10&11 @ 70Kg /m3 8mm dia

12mm and above

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing 150 mm wide BRICK DRAIN in cement mortar (1:6) with avarage 150mm. Clear depth and 125 mm apron including cost of earthwork involved with 75m cement concrete (1:4:3) over one brick designation 75A, flat soling in proper grade and slope at the base , the drain dully plastered in C.M.(1:3) with puning over exposed surface all complete as per building specification and direction of E/I.

Providing 250mm wide brick drain in cement mortar (1:6) with a'\I. 250mm . clear depth and 250mm. apron including cost of earthwork involved with 75 nun. - cf rne n t concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/1.

Supplying materials and labours for construction of I.C. of size 750mm deep, 600 × 450 internal dimension …do…. all complete as per specification and direction of E/I.

Supp lying," fitting & fixi.i1g C.A.R.W.D. pipe witl1 necessary slTi ps, spikes, bends, shoes etc. including cost of ca rria ge all complete as per buildi.J1g spe cificat ion and d ire ction of E/ I.

Point wiring in PVC conduit, with piano type switch - Wiring for light point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/G.I. box etc. as requiredGroup C

Wiring for light point/ fan point/ exhaust fan point/ call bell point witl1 1 .5 sq.mm FR PVC insulated copper cond uctor sinp,fo core cable in su rface/ recessed PVC conduit, wilh piano lype swit ch, phenolic laminated sheet, suitable size PVC/M.S box etc. as required.

Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.

2x1.5 sq mm +1 x 1.5sq mm earth wire.

2x2.5 sq mm +1 x 2.5sq mm earth wire.

2X6 sq mm+1X6 sq mm

S/F PVC Conduit 20mm

S/F ceiling rose 2 pin 5 amps

75x75x50 mm deep GI box

126x277x61mm deep GI box

Earthing with G.I. earth pipe 4.5 mtr long . 40mm dia including accessories,

Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required.

S/F piano type switch/socket - Supplying and fixing following piano tyep switch/socket on the existing switch box/cover including connections etc. as required. 5/6 amps, one way switch

3 pin 5/6 amps, socket outlet

S/F Modular type electronic fan regulator:- Supplying and fixing stepped (two module) type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

S/F Batten / Angle Holder:- Supplying and fixing batten / angle holder including connection etc as required.

S/F of following sizes of PVC conduit alongwitl1 the accessories in surface/recess including cutting U1e wall and making good the same in case of recessed conduit as required. 20 mm PVC coduit.

25 mm PVC coduit.

Supplying and fixing following way single pole neutral, sheet, MCB disrtibution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 8 way, single door.

Supplying and fixing 6 amps to 32 amps rating, 240 volts, "B" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commossioning etc. as required. 6/32, single pole, "B" series

S/F DP MCB Isolator - Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution board 240 volts, on surface /recess , complete with loose wire box, terninal blocks, duly prewired with suitable size FR PVC insulated copper conductor. 2+8 way doub1e door.

Supply of 9/10 Watt LED Bulb Of I.S.I Marked.

Supply of LED Street light (45/48W)

Supply of LED Batten (20/22W) Of I.S.I Marked.

Supply and installation of Ceiling fan 48" (1200mm) Of I.S.I Marked.

Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all compere as per specification and direction of E/I.

Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I. 25 mm dia

32 mm dia

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. Mirror (600x 450mm)

C.P. brass towel rail

C.P. brass soap dish

Supplying, fitting and fixing viterious white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair or viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580mm long - With 12.5 lit. low level PVC cistern

Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I. With 'P' trap - 12.5 lit low level PVC Cistern

Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of 'Hindustan "Parry" or any other approved I.S.S. make with 5 liters capacity C.I. automatic flushing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S., brackets, standard size G.I. flush pipe with fitting clamps, 15mm, C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm P.V.C./Alkthene pipe 450mm long with brass coupling at both ends and doing plumber joints including painting coat of red oxide cutting wall and floor making good the same etc. all complete as per specification and direction of E/I. (a)Flat back or Standing Cornar 600mmx350mm

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms. 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.

Supplying, fitting and fixing C.A.R.W.D. Pipe with necessary strips spikes, bends, shoes etc. Including cost of carriage, all complete, as per building specification and direction of E/I. 75 mm diameter

Providing and fixing chlorinated polyvinyl chloride (CPVC)pipes, having trermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting,i/c fixing the pipes with clamp at1.00m spacing.This includes jointing of pipes & fittings with one steps CPVC solvent cement and the cost of cutting chases and making good the same including testing ofd joints complete as per of derection of Engineer in charge. concealed work, including cutting chases and making good the wall etc. 18.8.1 15 mm nominal outer dia pipes

18.8.2 20 mm nominal outer dia pipes

32 mm dia.

Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Carraige of materials Bricks

Local Sand

Coarse Sand

Stone Chips

Metal

Cement

Steel

Goods & Service Tax (G.S.T.) -

Labour Cess -

Please Enable Macros to View BoQ information