Supply of Op Works Store

Two-Tier Sleeping Bunks: (a) MS pipe two tier sleeping bunks as per CE 15 Corps Drawing No 3534/ OW/15 Corps / Two Tier Sleeping Bunk/ sheet 1/1 dated 14 Jul 2010 attached with this TS. A detachable ladder made up with 20 mm MS pipe with four steps to be provided in each bunk. Male / female MS rectangular box of size 50 mm x 25 mm x 75 mm long to be welded, two side protector bars of 15 mm dia MS pipe on top bunk to be welded as per details shown in drawing. The outer size of the bunk will be 1970 mm x 950 mm horizontally and 1950 mm x 950 mm vertically. The Bunk should have provision to place a removable type matress of size 1830 mm x 910 mm to angle iron frame with adequate holes pre drilled in the frame. All MS pipes shall be medium grade ISI mark and provided with two coats of superior quality Black Spray paint over a coat of red oxide primer. (b) Two Nos single piece cushion made of 100 mm thick “PUF” foam of density 40 Kg/cum as applicable for sleeping cushions to be provided with each bunk removable type of standard make : Sleepwell/Kurlon of size 1830 mm x 910 mm. The Puf Foam pasted on the ply - wood shall be enclosed vinyl coated laminated upholtery cloth (Rexene) of specification as mentioned in Appendix C

Uri/Mohura

Naugam

Form Work -Type -2 :-Timber form work material for columns of size 0.3 X 0.3 X 0.9m and columns footing of size 0.9 X 0.9 X 0.3 m ( type F-2) made out of 30mm thick hard wood planks / boardings ( wrought in one side) incl making 12mm dia holes

Uri/Mohura

Naugam

MS clamp made of MS flat 40 X 4 mm, 200mm long bent in L shape with two holes of 12mm dia on each end. 04 X Nut & Bolt of size 10 X 50 mm with washer.

Uri/Mohura

Naugam

Prefabricated foundation Reinforcement type F-2 made of 12 mm & 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups us as per drawings including cutting bending & binding with mild steel binding wire annealed not less then 0.90 mm dia complete

Uri/Mohura

Naugam

Steel window 1500x300mm fabricated with 6mm thick MS plate slidng shultter internally & Acrylic sheet shulter externally bottom hinged.

Uri/Mohura

Naugam

Boniyar/Rampur

Ziran/Gulmarg

Steel window 1200x300mm fabricated with 6mm thick MS plate slidng shultter internally & Acrylic sheet shulter externally bottom hinged.

Uri/Mohura

Naugam

Boniyar/Rampur

Ziran/Gulmarg

Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 4300mm length including detachble 'Y' arm. The length of one arm 800mm sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/1 dt 05 Sep 2018 and all other Technical Specification as per Appendix 'A' 04 NO 12mm dia holes will be provided on angle post and 'Y' arm each as shown in drg att for fixing of 'Y' arm nut bolt. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge. Drawing attached as Appendix ‘O’

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 3600mm long single plece, having sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/1 dt 05 Jul 2013. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge. Drawing attached as Appendix ‘P’

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 2700mm long single plece, having sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/1 dt 05 Jul 2013. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge. Drawing attached as Appendix ‘Q’

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 2100mm long single plece, having sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/1 dt 05 Jul 2013. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge.

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Angle iron Strut made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 2700mm long single piece, having sectional weight 5.8 Kg per mtr confirming to HQ 15 Corps drawing No 3534/LC /Picket/002 Sheet 4/5 dt 24 Jul 2009. All angle iron Strut will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of bush green synthetic enamel spray paint, Except bottom 600mm length. Finished angle iron post shall be free from burbs and sharp edge. Drawing attached as Appendix ‘S’

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Punched Tape Concertina Coil (including spike and handle) with 50 turns and dia 1050 mm, having a core wire of high carbon spring steel of high tensile strength. The punched tape and core wire (2.6 ± 0.035 mm dia) are electro galvanised to provide protection against out door exposure. The punched tape is mechanically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil; steel clips “total 129 Nos per coil equally spaced” to connect the individual turns of the coil to each other so that it opens up like an accordion. The width of strip as 19 mm and spacing of blades 24.00 ± 0.5 mm C/C. The weight of each coil will be 15.2 ± 5% Kgs without packing material and coil length 15 mtr when opened up with an effective height of 915 mm. Each coil wound with bituminised Hessian cloth for providing protective packing. Ref specification No CQAE/5660/1602/A for raw material and drawings IMGA-0112/B (sheet 1 of 2), IMGA - 0112/C (sheet 2 of 2), IMPD - 1817/B, IMPD - 1820, IMPD - 1821/B and IMPD - 1822/B.

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Galvanised Steel Barbed Wire, ISI marked A-5 designation for Galvanised steel barbed wire for fencing shall conform to IS 278 – 1978. The barbed wire shall consist of two line wire 2.24 mm dia (Tensile strength 390 – 590 N/mm2 minimum breaking load of complete barbed wire 3kN), one or both containing 2.00 mm dia barbs at 75 mm centre to centre and weighing 97 to 106 Kg per Km. The barbs shall have a length of not less than 13 mm and not more than 18 mm. The line and point wires shall be circular in section, free from scales and other defects and shall be uniformly galvanised. The line wire shall be in continuous length and shall not contain any welds other than those in the rod before it is drawn. The galvanising shall conform to the requirement as laid down for light – coated wire of IS 4826 – 1968 `Specification for galvanised coating on round steel wires. Barbing wire(line) shall be hard type heavy coated (230 gm/sq m) and barbing wire (point) shall be hard type light coated (70 gm/sq m). The Galvanised barbed wire will be in bundles of 25 to 30 Kgs each and the bundles will be packed in hessian cloth, the bundles should be strong enough to withstand rough handling during transportation. Every reel of barbed wire shall be marked legibly with BIS standard make the name of manufacturer, the type of barbed wire, the diameter of the line and point wires, barb spacing and length and/or mass of the reel.

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Glass dividing strips 40x4mm

Uri/Mohura

Winter Route Marker. Provision of winter route marker Snow mast (WRM) made of MS structural steel tube section having three segment of different bore as described details of three steel tube section shall be as per technical specification and store list attached in RFP of Drawing attached as Appendix ‘T’

Uri/Mohura

Naugam

Boniyar/Rampur

Ziran/Gulmarg

Supply of Pre-Fabricated Store Shelter made up of Steel Structure of size 18.30 x 6.10 x2.95m (Truss Bottom) as per HQ 15 Corps drawing No 3534/Store/001/Sheet 1/2 and 2/2 dt 10 Apr 2018 and all other technical specification and store list attached in RFP of Drawing attached as Appendix ‘U’

Uri/Mohura

Supply of Pre-Fabricated OJ2R Shelter made up of Steel Structure and PUF panels in wall of soze 10.64 x 6.10 m x 2.70 m (False Ceiling Level) with attached toilet and all other technical specification and store list attached in RFP of Drawing attached as Appendix ‘V’

Uri/Mohura

Naugam

Pre – Fabricated steel tubular animal transport shelter (AT Shelter) made up of steel structure of size 18.25 x 10.50 x 3.05m height (up to bottom of truss) and up to 2.70 m (false Ceiling level) as per HQ 15 Corps drawings Nos 3534/AT SHELTER/001 SHEET NO 1/7 and 7/7 dt 12 Jan 2011 and technical specifications are give in Drawing attached as Appendix ‘W’

Uri/Mohura

Naugam

Pre fabricated Steel door confirming to IS 1038 1938 of size 0.90 mx1.80 m frame made of MS angle iron 50x50x6mm and shutter made of MS angle iron 40x40x6mm. MS sheet 2 mm welded for cladding of shutter . Door shutter proveded with pinfel hinges in such a way so that it can open on both sides and fixed on either side of entrance. Door shall be provided with iron mongories as shown on drawing and shall be painted with two coats of synthetic enamel paint (OG Colour) over one coat of red oxide primer.

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Steel window 1200 x 300mm fabricated with 'U' channel frame work of size 25x25mmand 5mm thick and necessary FI to be fixed for sliding arrangement with 2mm thick MS plate sliding shutter intenally & Acrylic sheet shutter externally bottom hinged.

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Steel window of size 1200x600mm shall be provided.The main frame work shall be MS channel 'U' sec (12 mm grovex6mm thick), shutters of size 0.600x0.300m and 6 mm thick will be fixed for smoothly sliding within MS 'U' channel. Two bow handles are also provided for easy opening and shifting the shutters . Externally Acrylic sheet bottom hung shutters will be provided incl iron mongery etc complete.

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Steel window 1500x600mm shall be provided. The main fram work shall be MS channel 'U' sec 25x25x5mm (12mm grove x 6mm thick), shulters of size 0.06x0.30m and 6mm thick will be fixed for smoothly sliding within MS 'U' channel. Two bow handles are also provided for easy opening and shifting the shulters. Externally Acrylic sheet bottom hung shutters will be provided incl iron mongery etc completed incl painting.

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Prefabricated steel door of size 1.50 x1.80Mtr made out of 2 mm thick MS Plate two nos of shutters welded/riveted on 50x50x6mm ISA shutter frame.Frame fitted fitted on door column 2.1 Mtr long made up of equal angle 65x65x6mm with 03 Nos hinges and 03 Nos holdfasts incl all requisite iron mongery. Door Shall be painted with two coat of OG synthetic enamel paint over onecoat of red oxide primer.

Uri/Mohura

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Steel window 1200 x 1200mm with 6mm thick MS plate sliding shutter intenally & wire mesh side hung shutters externally.

Uri/Mohura

Naugam

Rampur/Boniyar

Prefabricated steel door of size 1.20 x1.80Mtr made out of 2mm thick MS Plate welded/riveted on 45x45x6mm ISA shutter frame with diogonal bracings with same angle .Frame fitted fitted on door column 2.1 Mtr long made up of equal angle 50x50x6mm with 03 Nos hinges and 03 Nos holdfasts incl all requisite iron mongery. Door Shall be painted with two coat of OG synthetic enamel paint over onecoat of red oxide primer.

Uri/Mohura

Naugam

Rampur/Boniyar

Prefabricated steel door of size 0.90x2.10Mtr made out of 2 mm thick MS Plate welded/riveted on 45x45x6mm ISA shutter frame with diogonal bracings with same angle .Frame fitted fitted on door column 2.1 Mtr long made up of equal angle 50x50x6mm with 03 Nos hinges and 03 Nos holdfasts incl all requisite iron mongery. Door Shall be painted with two coat of OG synthetic enamel paint over onecoat of red oxide primer.

Uri/Mohura

Naugam

Rampur/Boniyar

Naugam

Rampur/Boniyar

Ziran/Gulmarg

Steel window 1200 x 1200mm with 6mm thick MS plate sliding shutter intenally & wire mesh side hung shutters externally.

Uri/Mohura

Naugam

Rampur/Boniyar

M/S LONE BUILDERS AND SUPPLIERS

M/S Abid Builders and Suppliers

M/S Universal Fabricators

sun rise

M/S TARIQ ENGINEERING WORKS