Repair/ maint of Street lights and allied Works under AGE E/M - I of GE Dehradun.

Amount

Supply, laying, jointing and testing in replacement of underground XLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 Core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size all as specified and directed.

All as per Item No 01 here-in-above but 10 Sqmm 2 Core

All as per Item No 01 here-in-above but 16 Sq mm, 4 core

All as per Item No 01 here-in-above but 16 Sq mm, 2 core

All as per Item No 01 here-in-above but 25 Sq mm, 4 core

All as per Item No 01 here-in-above but 35 Sq mm, 4 core

All as per Item No 01 here-in-above but 50 Sq mm, 4 core

M&L for Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in any type of soil complete all as specified and directed.

M&L for Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

M&L for Removing of excavated soil to a distance n. exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed.

M&L for laying well burnt brick, sub class 'B' old size in trenches, as protection of under ground cable complete all as specified and directed.

M&L for GI Tubing 50 mm dia Light grade (ISI marked) with all fitting/acessories for protection of cable on pole/wall and under road crossing, laid in trenches including clamps, nut bolt etc complete all as specified and directed.

M&L for Cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation and mass concrete for fixing poles etc complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) for coping of pole including necessary form work and finishing exposed faces of concrete smooth and even using extra cement complete all as specified and directed.

Taking down the existing unserviceable / defective street light fittings from Pole/ Bldg any type/ capacity & height carefully for repairs / replacing the defective parts and refixing the same in the position after repairs and testing complete cable required for connection shall be deemed to be included in the quoted rates, size of cable shall be flat three core weather proof multistranded alumunium conductor cable, 2.5 mtr long complete all as specified and directed. (Note:- The repair work shall be carried out on complaint basis and shall be measured & paid only once through out the contract period after carrying out irrespective number of repairs and required spairs parts shall be measured and paid seperetly.)

Supply and fixing in replacment of u/s driver suitable for 25 5watt including LED light of LED street light fittings complete all as specified .Make: Havells/ Philips/C&S/Eveready

Supply and fixing in replacment of u/s driver suitable for 45 watt including LED light of LED street light fittings complete all as specified .Make: Havells/ Philips/C&S /Eveready

Supply and fixing in replacment of u/s LED driver suitable for 70 watt including LED light of LED street light fittings complete all as specified .Make: Havells/ Philips/C&S/Eveready.

Supply and fixing in replacment of u/s LED driver suitable for 100 watt including LED light of LED street light fittings complete all as specified .Make: Havells/ Philips/C&S/Eveready.

Supply and fixing of surge protection device 10 KV 240 Volts suitable for LED street light fitting complete all as specified. Make:- HPL/Crompton/Philips/Eveready.

M&L in replacement GI bracket made out of 40 mm GI pipe medium grade bend for fabrication to shape as required length of pipe 1.2 mtr with necessary fixing arrangement by means of MS clamps 02 Nos not less than 50x6 mm MS flat duly painted, nuts, bolts and washer complete all as directed.

S & F flood light fittings energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing IP65 flood light with high power LED's as light sources, suitable for high lighting architectural features or retail spaces as 100 watt LED with lumen output 12500, system efficiency 100 lumen/watt, CCT>5700K, PF>0.95, Glass cover complete all as specified and directed. Make:- Philips cat No. BVP120 LED70 CWNB FG S1 PSU GR/Havells cat part No. JETAFLAREFL70WLED757LTG/ CROMPTON cat part No LFL-80CDL/60-M or equivalent in Eveready including taking down old flood light fittings.

S&F integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 70/72 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed.. Make:- Philips model No. BRP410LEDCW072 MRFGSIPSUGR Havells model No. LHETBXU7PA6J070 and equivalent in Polycab/ Eveready/ Cromption, including taking out old unserviceable street light fittings.

S&F integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete including taking out old unserviceable street light fitting all as specified and directed.. Make:- Crompton model No. LSTP-45-CDL/Havells model No. ENDURAPEARLNEOSL 40WLED757PASYTOPC /Philips Cat Part No BRP409LED CW036MRFGIPSUGR or equivalent in Eveready.

S&F integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 100 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed.. Make:- Philips model No. BRP410LEDCW025 FGSIPSUGR/ Havells model No. LHETAXU7PA6S025 or equivalent in Eveready/ Crompton and including taking out old unserviceable street light fittings.

Supply and fixing in replacement LED Solar street light fitting 20 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete all as specified. (Note - Excavation & earth work shall be measured separately).

Supply & Fixing in replacement street light timer single phase street panel comprising MCB 40 Amp SP power contactor 40A luxo switch 1 Lux =1,000,00 auto manual faclity duly complete wiring suitable for 15 KW 3 phase 6 module enclosure with IP 65 protection front door use suitable for 240V 3 phase including GI clamping & fixing to pole with IP-65 a weather proof & out door type IK09 protection all as directed. Make: Legrand/Simens/Schneider

S&F in replacement PVC (Tharmoplastic) street light junction box 250X200X100mm, heavy duty with locking arrangement, single phase and neutral two Nos copper busbar with hole for incoming and outgoing cable of size 6/10/16/25 sqmm 2 core, busbar of capacity 100 Amp PVC conduit up to the height of bottom level level of PVC Junction box from GL along with necessary MS clamp, nuts bolts and washers for fixing and one No. MCB Single Pole 240 Volts 6 Amps complete all as specified and directed.

S&F in replacement pole mounted Junction Box as per sintex Cat No GS-JB-2520 ; 250X200X100mm for fixing cable with provision of four Nos copper busbar with hole for incoming and outgoing cable of size 6/10/16/25 sqmm 2/3.5/4 core, busbar of capacity 100 Amp mounted on epoxy insulator with MCB SP 6 Amp 'B' series including all bare conductor of cable duly insulated PVC heat shrinkable sleeve 1.1 KV heavy duty grade cp brass cable glands & lugs for incoming & outgoing connection all as directed. Make: Hensel/Schneider or as approved.

M&L for service cable 10 sq mm twin core Weather proof aluminium conductor cable PVC sheathed PVC insulated round suspended with No.8 SWG GI wire and reel insulators at distance of 01 mtr duly connected with earthing and clamp etc from Pole to pole complete all as specified. (Note:- only earthing shall be measured and paid seperately and all other items are incl in item rate) Make :- Finolex/Ploycab/RR Kabels.

All as per item No 32 here in above but 6 Sqmm 2 core complete all as specified. Make :- Finolex/Ploycab/RR Kabels.

Material and labour in replacement of GI tubing medium grade 50 mm bore, complete with all fittings for installation of post top Lantern fitting complete all as specified and directed.

Material and labour in replacement of GI tubing medium grade 40 mm bore, complete with all fittings for installation of post top Lantern fitting complete all as specified and directed.

S&F in relacement LED decorative post top lantern for Garden light 40 watt IP 65 protection resistance to impact and corrosion glare, free and better uniformity milky version as per CG cat part No LPTO40CDL/ Bajaj model No. BGCTW4LEDWW or equivalent in Eveready/ Havells .

Supply only of 3 core 1.5 Sqmm copper conductor cable in existing pole incl making holes for cable entry and exist near to light fitting and junction box complete all as directed.

Trimming/cutting of tree branches to provide proper clerance around existing LT/ HT over heah lines with clearance of 3mtr on all as per technical requirement including removing of cutted trees branches from site and depositing one place for burning/removing and directed by Engr-in-incharge.

M & L for cutting chases in hard standing road/path/drain etc for passing cables/pipes etc. size of cutting 100mm wide and 200mm deep and removing the excavated materials and disposal at 50 metre distance and making good the cutting after the pipe and cables are laid with PCC 1:3:6 type C-1 using 20mm graded stone aggregates complete all as specified and directed.

S&F in replacement \junction box 75cm x60cmx40 cm fabricaed out of Mssheet 16 gauge weather proof heaving four legs including aluminium bus bar strip (4nos) with front operating arrangement, spray painted internally and externnally over a coat of red oxide primer mounted on two member PCC 1:3;6 pillare base including necessary earth work in any type of soil.

Supplying, transporting, errecting and fixing in replacement Steel tubular swaged poles type 410 SP-31, 9.00 metre long , complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified including painting with two coats of synthetic enamalled paint over one coat of red oxide primer and 06 Nos bands/ straps with yellow and black colour ( 30 cm wide each)epoxy heat resistant paint at a distance 30 cm from plinth block and numbering of poles with black synthetic enamel paint in 2.5 cm height including tarring/Bituminous paint one coat on steel surface embedded in concrete foundation complete all as specified and shown on drawings and directed. Make : M/s Anil Engg Corporation Kanpur/ National Tubing Co Kanpur/ M/S sohan lal and sons or as per approved make.

M&L in replacement cross arm, bracing supports, clamps and back plates fabricated from structural steel section, such as channel, ISMC, angle iron , flat iron nut, bolts & washers welding, cutting drilling hole for insulator bolts clamps in any shape size & two coats of aluminum paint over one coat of red oxide zinc chromate primer all as directed by Engr-in-Charge. Make: Jindal/TATA/Sail

M&L aluminium conductor steel reinforced (ACSR) conductors for LT OH line binding with copper binding wire/alumium tape line connector of suitable size with insulator/stretching of ACSR conductor complete all as specified and directed including taking out old ACSR conductor. Make: Indian Aluminium Co./Bharat conductor/Aluminium ind or as per approved make.

M&L in replacement galvanised steel wire 3.15 or 4mm dia , cradle guards, hexagonal/rectangular fabricated of galvanised steel wire 3.15mm dia including binding wire aluminium complete cradle guard complete all as specified.

S&F pin type insulator porcelain,vitereous white brown or green of size 100mm height & 65mm dia including one galvanised mild steel spindle, two galvanised iron washer, and one galvanised iron nut, 100mm, high and 65 mm dia, working pressure 1100 volts including taking down old insulator complete all as specified. Make Southern insulator/BHEL/Ws Insulator/Jayshree

S&F shakle type insulator, porcelain, vitreous, white, brown, or green insulator including galvanised mild steel straps, washer, insulator bolts, washers, nut, LT, 1100 volt grade, height 75mm, max dia 90mm, section of strap 31x3mm, dia of bolt 12 mm including taking down old unserviceable insulator. Make Southern insulator/BHEL/Ws insulator/Jayshree

M&L in replacment stay assembly complete comprising of 16mm dia galvanised stay rod 100 cm long MS galvanised stay plate 6mm thick of size 230nnx230mm including loop insulator white with over all dimension 90 x 140 mm clearance of hole 25mm for LT 1100 V all specified and as shown in electric plate No 1 of SSR part-I. Note: loop type insulator,stay clamps, excavation and concrete work shall be measured and paid separately.

M&L in replacement loop type insulator vitreous procelain, white , brown or green, large size with overall dimensions 65 x 90mm, clearence of hole 16mm etc complete all as specified and directed.

M&L galvanised stay strand, 7/3.15 mm complete all as specified and directed.

M&L for painting of poles 11 Mtr long with one coat of aluminium paint complete including fittings such as brackets etc. and black&white synthetic enamel paint on alternative strips upto height of 1.5mtr from copping of the pole including numbering the pole with 8cm letter with back paint having back ground of yellow painted circle of 10cm dia all as directed by Engineer-in-Charge

All as per item No-50 here-in-above but pole 9 Mtr long complete all as specified and directed.

Disconnecting existing LT over heated or burnt cable terminal at existing panel/ board/feeder pillar box etc., cutting out over heated / burnt / unserviceable and portion of cable, stretching / opening cable to suitable required length from available rings etc. and re-fixing and connecting the cable in position properly by providing suitable new aluminium lugs and suitable GI nuts, bolts & washers etc. complete all as directed by the Engineer-in-Charge of size 25 sqmm to 120 sqmm cable of any core .(NOTE : Excavation and earth work for stretching the cable / increasing and obtaining necessary length from the rings etc. for making joints shall be measured and paid for separately under appropriate item of Schedule `A').

All as per item No 52 here-in-above but 150 Sqmm to 240 Sqmm cable of any core complete all as specified.

S&F in replacement MCCB 500 Amps 50 KA 4 pole 415 V AC 50 Hz thermal-magnetic release Ics=100%of Icu complete all as specified.

S&F in replacement MCCB 400 Amps 35 KA 4 pole 415 V AC 50 Hz thermal-magnetic release Ics=100%of Icu complete all as specified.

S&F in replacement MCCB 250 Amps 35 KA 4 pole 415 V AC 50 Hz thermal-magnetic release Ics=100%of Icu complete all as specified.

S&F in replacement MCCB 200 Amps 35 KA 4 pole 415 V AC 50 Hz thermal-magnetic release Ics=100%of Icu complete all as specified.

S&F in replacement MCCB 160 Amps 25 KA 4 pole 415 V AC 50 Hz thermal-magnetic release Ics=100%of Icu complete all as specified.

S&F Alumn lugs 300 sqmm size complete all as specified.

S&F Alumn lugs 120 sqmm complete all as specified.

S&F Alumn lugs 95 sqmm complete all as specified.

S&F Alumn lugs 50 sqmm complete all as specified.

S&F Alumn lugs 35 sqmm complete all as specified.

S&F Alumn lugs 25 sqmm complete all as specified.

S&F Alumn lugs 16 sqmm complete all as specified.

S&F Alumn lugs 10 sqmm complete all as specified.

Supply only MS nut-bolt with washers any size complete all as specified.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3mm thick burried directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised from strip of 32x6mm earth lead by means of bolts, nuts, check nuts and wathers of GI or steel all as shown in electrical plate No. 5 of SSR Part-I 1991 connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber ( 1 : 3 : 6) type C1, RCC pit cover , charcol, salt including provision of earth lead protected by 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete all as specified. Note: (i) If the desired earth resistance is not found within permissible limit shall be redone by contractor at no extra cost. (ii) Cost of galvanised strip 32x6mm earth lead and 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering upto 7.5 mtr is included in the rate quoted for this item

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4mm dia by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (medium grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm reinforced with 8mm TMT bar 100 c/c both ways with one handle for lifting made out of 10 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (light grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil, complete all as shown in electrical plate No 3 of SSr part 1 including testing on completion all as specified and directed. Note:- (i) If the desired earth resistance is not found within permissible limit shall be redone by the contractor at no extra cost. (ii) Cost of GI wire 4mm dia and 15mm dia pipe medium grade upto 7.5 mtr shall be deemed to be included in the rate quoted for this item).

S&F in replacement 32x6mm galvanised iron strip fixed in ground,on wall, pole with epoxy based insulator for down conductor including drilling two Nos holes at each joint, one set of lead washers between strips two sets GI nut, bolt, washers one set of lead washers between strips two sets GI nut, bolts, washers gutties, screws etc complete all as specified.

Dismantling/taking down old unsv LT Feeder Pillar box by isolating electric supply, including removing all switch gears, busbar, measuring instrument etc all as directed

Supply, installation, testing and comissioning in replacement out door type Feeder Pillar box weather vermin proof factory made, front & back openable double door type with locking arrangement (including provn of 65 mm Godrej (Navtal) lock with 2 keys), fabricated out of 3.15mm thick CRCA sheet and 2mm thick inner enclouser CRCA sheet duly as per IS 5039 duly painted with powder coated of approved shade over a coat of zinc chrome primer after min seven tank treatment process including numbering & lettering mounted on C channel of appropriate size complete with IP-54 protection having 433 volts, 3 phase, for 800 Amps rating 4 Nos, including all connections with copper strips, duly drilled holes for connections, RYB insulated with different colour code complete heat shrink insulated enclosed openable front & rear copper bus bar of Panel board shall be provided with danger notice plate with skull & bone sign, effectively PVC gasketed and sealed, glands to be provided at cable entries, including angle iron 50x50x6mm, 90 cm long with base and grouted in PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) complete all as specified and directed and comprising of as under :- (Note:-The cost of the PCC plateform deemed to be included in the qouted rates of above said item).

Item ser No 72 contd/... Incoming :-(a) Air circuit breaker 415 Volt AC, 50 Hz, 630 Amp four pole breaking capcity 50 KA, manual drawout type, Microprocessor based. Make - c&S, Siemens Cat No 3WT80 - 01 No (b) Digital 3 lines LCD display panel mounted multifunction energy meter 96x96mm flush mounted accuracy class 1.0 complete with suitable size of CTs and copper control wiring Make- HPL Cat Part No - EM - VIPF or equivalent in AE - 01 No (c) Phase indicating lamp - 01 Set of three Out Going :-(a) MCCB 400 Amp FP breaking capcity 35 KA 415 Volt AC, 50 Hz, with thermal Setting 70 to 100% - 01 No (b) MCCB 415 Volt AC, 50 Hz, 250 Amp TP breaking capcity 35 KA with thermal Setting 70 to 100% - 02 No (c) MCCB 415 Volt AC, 50 Hz, 200 Amp TP breaking capcity 35 KAwith thermal Setting 70 to 100% - 01 No (c) MCCB 415 Volt AC, 50 Hz, 100 Amp TP breaking capcity 25 KA with thermal Setting 70 to 100% - 02 Nos (d) MCCB 415 Volt AC, 50 Hz, 63 Amp TP breaking capcity 25 KA with thermal Setting 70 to 100% - 02Nos Make of MCCB :- C&S/Schneider /L&T/Siemen/Legrand/ABB

Supply, installation, testing and comissioning in replacement outdoor type weather proof LT Panel factory made, front & back openable double door type with locking arrangement with 2 keys not less than150cm x 90cm x 75cm, fabricated out of 3.15mm structure and 2mm enclouser CRCA sheet duly as per IS 5039 duly painted with powder coated of approved shade over a coat of zinc chrome primer after min seven tank treatment process including numbering & lettering mounted on C channel of appropriate size complete with IP-54 protection having 433 volts, 3 phase, insulated bus bar for 600 Amps rating 4Nos, including all connections with aluminium strips, Pillar board shall be provided with danger notice plate with skull & bone sign, effectively PVC gasketed and sealed, glands to be provided at cable entries, including MS channel frame of ISMC 75 at the base of panel only for grouting purpose and grouted in PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) complete all as specified and directed and comprising of as under. Make of LT Panel - Legrand/L & T/Universal Switch gear & Control.

Item ser No 73.00 contd/...Incoming :-(a) MCCB 415 Volt AC, 50 Hz, 400 Amp four pole breaking capcity 50 KA, Microprocessor based. Make :- Siemens/L&T/Standard/Havells/BCH - 01 No (b) Digital 3 lines LCD display panel mounted multifunction energy meter 96x96mm flush mounted accuracy class 1.0 complete with suitable size of CTs and copper control wiring Make- HPL Cat Part No - EM - VIPF or equivalent in AE - 01 No (c) Phase indicating lamp - 01 Set of three Out Going :-(a) MCCB 415 Volt AC, 50 Hz, 250 Amp TP breaking capcity 35 KA, thermal setting 70% - 100% - 01 No (b) MCCB 415 Volt AC, 50 Hz, 200 Amp TP breaking capcity 35 KA, thermal setting 70% - 100% - 02 No (c) MCCB 415 Volt AC, 50 Hz, 100 Amp TP breaking capcity 25 KA, thermal setting 705 - 100% - 02 Nos (d) MCCB 415 Volt AC, 50 Hz, 63 Amp TP breaking capcity 25 KA, thermal setting 705 - 100% - 02 Nos Note - Make of MCCB - L&T/Siemen/Legrand/Havells/Standard

S&F in replacement ACB 4 Pole,415 volt, with microprocessor release, adjustable release manual draw type of capacity 630 Amps,65 KA including testing & commissioning complete all as specified. Make C&S/L&T/Legrand

Ansh Enterprises

M/s badrinath Traders

M/s Kamal Traders