245_22Agriculture shopping complex electrification

Amount

Part I-Electrification

Supply and wiring Single control light point using rigid PVC ivory conduit 20 mm minimum size conforming to IS and using 1.00 sq mm PVC insulated stranded single core FR copper conductor cable including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire ete according to IS 732-1989 and as per PWD specification (2012). with suitable size modular type metal switch boxes and front plates including 6 A modular type ROHS compliant SP switches 6A, 3 plate ceiling rose etc (Modular boxes ,switches and accessaries Make-Legrand Myrius/MK Blenz/Havells Oro/Hager .All other materials are as per the list of materials attached)

Specification of work as above without ceiling rose for batten light point.

Specification of work as above for ceiling fan point with socket size stepped electronic regulator .

Specification of work as above for Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Supply and installation of LED tube light fittings (Philips Endura high efficiency BN 108 C 20S CDL white or equivelent crompton make) directly on wall/ceiling with company made mounting accessaries/fabicated bracket suitably painted using T W round block and giving connection with 16/0.20mm 3 core copper conductor flex wire.

Supply and installation of LED tube light fittings (Philips Endura high efficiency BN 108C 20S CDL white complete on ball and socket arrangements on PVC round block, suspension down rod of 19mm dia MS conduit up to 2x30cm using company made symetric mounting accessaries ( AC108P MB S) length including painting and wiring the down rod with 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS

Supply and installation of LED Street light fittings LSTS-25-CDL Crompton make on 25 mm size GI Pipe 1 mtr long (minimum) bend/welded to shape and fixing to wall using sitable clamps and giving connection with 1.5 mm , single core PVC/PVC insulated copper conductor wire etc as required .

Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.

Supply and installation of 1200mm sweap ceiling fan with standard accessories with out reglator including giving connection with 16/0.20 mm 3core round copper conductor flexible chord etc as required.(Crompton (High speed)/Havells(SS-390)

Charges for cutting holes suitable for accommodating exhaust fans of sizes exceeding 305 mm sweep up to 450 mm including plastering, colour washing etc. as required.

Supply and installation of 225 mm medium duty 1350 rpm ,4 leaf exhaust fan in metal frame in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20 mm 3core round copper conductor flexible chord etc as required.(Almonard/Crompton make)

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm polished shade with 7W LED and giving connection etc as required

Supply and fixing 20 mm dia light gauge PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

Specification of work as detailed above with 25 mm dia light gauge on surface

Supply and drawing 1.50 sq mm 2 run 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections.

Specification of work as detailed above drawing 1.50 sq mm 4 run

Specification of work as detailed above drawing 2.50 sq mm 2 run

Specification of work as detailed above drawing 2.50 sq mm 4 run

Specification of work as detailed above drawing 4.00 sq mm 2 run

Specification of work as detailed above drawing 4.00 sq mm 4 run

Supply & Fixing 3 module metal box with white/ off-white front plate provided with 1 set of 16A SP switch and 6/16 A universel socket modular type in recess including making good the damages, colour washing etc as required (ROHS) including giving connections

Supply & Fixing 8 module metal box in recess with front plates provided with 2 nos of 6A SP switch and 3 nos 6 A universel socket modular type in recess including making good the damages, colour washing etc as required (ROHS) including giving connections

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of 10 Way single phase MCB DB (IP42/43)including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

Specification of work as detailed above with 6 way (8+18) - three phase double cover MCBDB (IP 42/43)

6 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

Supply and installation of 6-32A 10KA, SP MCB( C curve) suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 in the existing enclosure and giving connections as required

Specification of work as detailed above with32A,10 kA, DP MCB (C curve)

Specification of work as detailed above with 32A, 10 kA, 4 pole MCB (C curve)

Specification of work as detailed above with 50 A to 63 A, 10 kA, 4 pole MCB (C curve)

Specification of work as detailed above with25 A, 2 pole, 30 mA RCCB

Specification of work as detailed above with 40 A, 4 pole, 30 mA RCCB

Specification of work as detailed above with 63 A, 4 pole, 30 mA RCCB

Supply, laying and clamping of 2 core 6 sq mm PVC insulated and PVC sheathed armoured aluminium power cable 1.1 KV grade with factory made clamp , spacing of clamps not exceeding 60cms, making good the damages on wall , colour washing etc. as required.

Specification of work as detailed above with 4 core 10 sq mm cable

Specification of work as detailed above with 4 core 16 sq mm cable

Specification of work as detailed above with 4 core 25 sq mm cable

Supplying and providing Brass cable gland for armoured aluminium conductor cable 1.1 KV grade, and making end termination,crimping aluminium tubular cable socket and providing earth clamps for cable gland as per KPWD standards suitable for 6 sq mm 2core cable

Specification as detailed above for 10 sq mm 4 core cable

Specification as detailed above for 16 sq mm 4 core cable

Specification as detailed above for 25 sq mm 3.5 core cable

Supplying and providing earth clamps for siemens/ tropodur type cable glands of size 4sqmm-16 sq mm with 12 mm wide x 1 mm thick as required.

Specification as detailed above with 25 sq - 95sq mm with 20 mm wide x 1.20 mm thick clip

Supply of superior quality 6 sqmm aluminium tubular cable socket and making core termination of cables including crimping etc. as required.

Specification as detailed above for 10 sq mm 4 core cable

Specification as detailed above for 16 sq mm 4 core cable

Specification as detailed above for 25 sq mm 3.5 core cable

Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps including inspection chamber complete with 300 x 300 x 6 mm cast iron gully trap covering at the top of the inspection chamber of earth pit and providing as test joint 25 x 3 mm GI strip (2 nos) of minimum length 30 cm and providing earth lead from the test joint to the earth electrode using 10 SWG bare copper conductor including cutting, drilling necessary holes on the test joint ( in ordinary rock - soft laterite soil)as per KPWD standard

Supply and drawing bare earthing conductors 3.15 mm copper (10 SWG) along with wiring/ cables and giving connection as required.

Supply and drawing bare earthing conductors 2.00 mm copper (14 SWG) along with wiring/ cables and giving connection as required.

Supply and laying bare earthing conductors 3.15 mm copper conductor (10 SWG) laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil).

supply of superior quality copper earth socket for 2.00 mm (14 SWG) of earth conductor including crimping etc. as required.

supply of superior quality copper earth socket for 3.15mm (10 SWG) of earth conductor including crimping etc. as required.

Supply and providing 25 x 3 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

Supply and providing 25x6 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using 1.60 mm CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments should be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. including control wiring

Supply and providing 2 mm SMC sheets in the panel as barriers & shrouding using required bolts and nuts including cutting to shape etc., as required.

Supply and fixing A section neoprine beeding along the periphery of doors/ other detachable compartments to make the panel assembly dust & vermin proof including sticking with glue

Fabrication, supply, conveyance and installation of base frame for floor mounting type panel board using channel of class designation ISMC 75 including cutting, welding, drilling holes, painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel and to the finished floor using required bolt and nuts, making good the damages etc. as required.

Fabrication, supply, conveyance and installation of angle iron frame work for wall mounting panel board / cable tray using suitable size angle iron cut and welded to shape including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel using required bolt and nuts, fixing the whole to the wall, making good the damages etc. as required.

Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/ rigid conductors conforming to IS 1867 (with latest amendments) for bus bar arrangement with single strip per phase supported on finger type bus bar supports of adequate size, spacing between supports not exceeding 50 cm & overhang not exceeding 5 cm including bending to shape, drilling holes, tinning the points of contacts, fixing heat shrinkable PVC sleeves, plated bolts and nuts with plate washers and spring washers, copper sockets for round conductors, etc., as required.

Fabrication, supply & fixing earth bus system with copper strip/ conductor and connecting all accessories as per rule including g tinning the points of contacts etc as required

Carrying out control wiring for panels with sophisticated control devices such as relays, PLC etc including detailed Engineering, generating the required drawings according to the logical requirement etc with 650/1100 V grade PVC insulated stranded 1.50 sq. mm single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required

Supply and installation of 100 A 415 V, 50 Hz, AC 23 A duty, TP/ TPN switch disconnector unit in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required.

Specification of work as detailed above with 63 A, 415 V, 50 Hz, AC 23 A duty, TP/ TPN switch disconnector unit

Three phase multifunction meters to read V, A and F, accuracy class 1

100/ 5 A, 5 VA, resin cast metering CT of accuracy class 0.5

LED indicators for all voltage ranges - Blue Colour

LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour

Aluminium anodised Danger Notice Board of size 125 x 175 mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.

Supply and providing Three phase DOL starter sutable for 7.5 HP Motor L&T or equivalent make

Supply and providing Three phase 2 KVAR Cappaciror sutable for 7.5 HP Motor L&T or equivalent make

Supplying , threading , laying and jointing of 20 mm dia'B' class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads./Cables

Supply and fixing 100A ,415V Bakelite fuse fittings in the existing meter board and giving connections etc.

Supply and fixing 32A ,415V Bakelite fuse fittings in the existing meter board and giving connections etc.

Supply and fixing 80A ,DIN Type link in the existing fuse fitting.

Supply and fixing 16A , HRC fuse link in the existing fuse fitting.

Supply and fixing 100A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

Supply and fixing 32A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

Painting letters or figures of 2.50 cm, 4 cm or 5 cm height with enamel paint as identification mark to SB, DB, panel board etc as required

Charges for preparing drawing of the complete Electrical installation after completion of the present work and preparing completion report with KSEB service connection application form and submitting to the consumer for availng13 phase service connection/Load regularisation

Kittu Electricals private limited

Powerdrive Electrical Enterprises

RAVI VARMA

Delstar a Grade Electrical contractors