AIC/AED/NIeT-492/25-26/Gr_1

Supply, delivery, erection and commissioning of 9.0 meter high octagonal High mast pole with foundation type base plate and foundation bolt- Top .00 diameter 70mm, Bottom diameter 155 mm, section length 9000 mm,thickness 3.0mm, foundation type hase plate 250X250X16 mm and 4 nos)type foundation bolt(Pole make Utkarsh/Bansal/Kolkata poles) Pole shaft: &S conforming to BSEN 10025, Octogonal, contineously tapered with single longitudinal welding. Pole to be provided with rigid flange plate wityh provision of fixing 4 nos foundation bolts. The pole should be hot dip Galvanized Door opening: Door of 500mm length at the elevation of 500mm from base plate, weather proof with suitable locking arrangement. Inside the pole one no. 6A SP MCB and 4 way Power terminal block DMC 25A on Bakelite Sheet. Earthing stud to be provided in the bottom of the pole. Bracket for fixing luminaires: Ring type Bracket should be made of specified GI heavy duty pipe with minimum 1000 mm dia and 40mm dia suitable for mounting 4 nos LED light mounting

Construction of suitable rainforced foundation as par standard design with 1:1.53 cement concrete M-20 grade for the above high mast considering soil bearing capacity of 10T/sq mtr, 1000mm below Gl. and 300mm above GL. size 600mmX600mm(Cross Section)

Flood light luminiaries: Supplying and fixing of 120W LED flood light CCT 5700K, beam angle 60 Degree, Efficacy 110lm/W(min.), presure die cast Aluminium body with IP66 protectionPotted driver with SKV in-built & 10KV external (make Eveready/Cromton/Wipro/Bajaj)

Feeder Pillar box : SITC of floor mounted type feeder pillar box fabricated with 3mm CRCA MS sheet, dust and vermin proof(IP65) with rain protection hood, powder coated (RAL 7032) dimension H350XW350XD200MM, including S&F of 1 00 no.16 A DP MCB, 1 no. 2P Contactor(MNX-9, 2P, L&T), 1 no. Analog Timer Daily type, make GIC, Toggle switch for Auto/Manual, necessary inter- connection wiring by 2.5 sqmm for power wiring and 1.5sqmm for control wiring, 16A capacity 2 way Terminal block to be fixed on 1.6mm MS nase alate/DIN rail

Cable & Wires : Supply & Delivery of XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Polycab / Nicco/Gloster/Havells]. 2 core 10 sq.mm (Feeder pillar to Pole terminal block)

Laying of one No. cable underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) 0 Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly IF-2/11 rammed

Laying of 1 no. cable after cutting floor/pavement/wall/ and making holes incl, embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish. average depth of 75 mm in

Supplying and fixing compression type gland and finishing those for 7.00 following XLPE/PVC armoured cable (2/4/3.5) Core as per GS. core 10 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ 3.00 ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

Supplying & fixing of 40 mm Gt Pipe (ISI-Medium) Protection with necessary fittings as per GS

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe as per S. (Finolex/Polycab/Gloster/RRKable/) a) 2x(1.5 sqmm)+1x(1.5 sqmm) (loop connection of LED flood Light

Finishing of the PVC insulated wire ends by socketting with pin/ 1.00 ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and 2.00 providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) b) 25mm dia 3mm thick Polythene Pipe

Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts. Long With By ISI-Medium GI pipe as per GS Earthing

Earth Continuity Conductor No. 8 SWG

Sub Total

Please Enable Macros to View BoQ information