Tripura

Cancelled

Works

Civil Works - Others

Repair and Maintenance of Lebacherra Godown under Karbook Agri Sub Division Gomati Tripura for the year 2026 27

Director Agriculture

Lebacherra Karbook Gomati Tripura | Gomati, Tripura

Amount: ₹4.5 LCloses: 8 Sept 2026Closed

Timeline

Published1 Sept 2026
Cancelled7 Sept 2026

Cancellation Details

Cancellation of Tender

Cancellation of TenderCancellation of TenderReason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 7 Sept 2026

Tender Value

₹4.5 L

EMD Value

₹9,044

Closing Date

8 Sept 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

The Executive Engineer Agri South Udaipur Gomati

Address

The Executive Engineer Agri South Udaipur Gomati Tripura

Work Description

Repair and Maintenance of Lebacherra Godown under Karbook Agri Sub Division Gomati Tripura for the year 2026 27

Tender Information

Tender ID

2026_AGRI_76587_1

Reference Number

32/EE/AGRI/SOUTH/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

45 days

Location

Lebacherra Karbook Gomati Tripura

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per Tender

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredDocuments to be upload as mentioned as Page No. 43 of DNIT as per Sl. No. 1 (.pdf)

RequiredAll bidder documents as per DNIT (.pdf)

RequiredDNIT (.pdf)

RequiredAnnexure I, II and III uploaded as per DNIT (.pdf)

RequiredAll Appendix I to X uploaded as per DNIT (.pdf)

RequiredExperience as per similar nature of works (.pdf)

RequiredPWD FORM 7 (.pdf)

RequiredValid Labour License (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,000

EMD Fee Amount

₹9,044

Pre-Bid Meeting

Meeting Place

The Executive Engineer Agri Udaipur Gomati

Important Dates

Last Activity

7 Sept 2026

Published

1 Sept 2026

Bid Opening

9 Sept 2026

Download Starts

1 Sept 2026

Download Ends

8 Sept 2026

Submission Starts

1 Sept 2026

Clarification Period

1 Sept 2026 - 3 Sept 2026

Pre-Bid Meeting

3 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (4 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Repairing Work :
1.01	First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ).	-	cum	11,410.19	-
1.02	Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge.	-	sqm	92.8	-
1.03	Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge	-	sqm	1,092.7	-
1.04	Providing and fixing 1mm thick M.S. sheet door withframe of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concreteof required grade for fixing in position, all necessary fittings, including applying a priming coat of approvedsteel primer etc. complete as required	-	sqm	4,711.7	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.10 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.46 MB

Work Item Documents

32DNITLebacherraREP.pdf

Tender Documents • 2.54 MB

BOQ_77963.xls

BOQ • 0.28 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Repairing Work :
1.01	First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ).	-	cum	11,410.19	-
1.02	Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge.	-	sqm	92.8	-
1.03	Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge	-	sqm	1,092.7	-
1.04	Providing and fixing 1mm thick M.S. sheet door withframe of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concreteof required grade for fixing in position, all necessary fittings, including applying a priming coat of approvedsteel primer etc. complete as required	-	sqm	4,711.7	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Repairing Work :

1.01

First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ).

cum

11,410.19

1.02

Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge.

sqm

92.8

1.03

Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge

sqm

1,092.7

1.04

Providing and fixing 1mm thick M.S. sheet door withframe of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concreteof required grade for fixing in position, all necessary fittings, including applying a priming coat of approvedsteel primer etc. complete as required

sqm

4,711.7