Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.8 LAccepted-Finance CHANPUR KHAYERPUR WARD NO 9 AMC AGARTALA WEST TRIPURA PIN 799008 | AGARTALA | WEST TRIPURA | TRIPURA | 799008 | ₹7.8 L | L1 | Accepted-Finance L1 |
| 2 | L2₹8.1 L+₹32,745 (4.19%)Rejected-Finance BHUMIHIN COLONY EAST NOAGAON RANIRBAZAR WEST TRIPURA PIN 799035 | RANIRBAZAR | WEST TRIPURA | TRIPURA | 799035 | ₹8.1 L+₹32,745 (4.19%) | L2 | Rejected-Finance L2 |
| 3 | L3₹8.3 L+₹50,280 (6.43%)Rejected-Finance KALACHAND KOBRA PARA JIRANIA WEST TRIPURA PIN NO 799045 | WEST TRIPURA | TRIPURA | 799045 | ₹8.3 L+₹50,280 (6.43%) | L3 | Rejected-Finance L3 |
| 4 | L4₹8.7 L+₹90,388 (11.6%)Rejected-Finance DARUGAMURA PARA SIDHAI MOHANPUR WEST TRIPURA 799212 | WEST TRIPURA | TRIPURA | 799212 | ₹8.7 L+₹90,388 (11.6%) | L4 | Rejected-Finance L4 |
| 5 | L5₹9.0 L+₹1.2 L (15.7%)Rejected-Finance PANCHAYAT TILLA RADHAKISHORE NAGAR OLD AGARTALA WEST TRIPURA | OLD AGARTALA | WEST TRIPURA | TRIPURA | ₹9.0 L+₹1.2 L (15.7%) | L5 | Rejected-Finance L5 |
Tender Value
₹9.7 L
EMD Value
₹19,376
Closing Date
21 May 2026, 3:00 pmClosed
THE EXECUTIVE ENGINEER
O/O THE EXECUTIVE ENGINEER, DWS DIVISION, JIRANIA
Please refer to the DNIeT
2026_CEDWS_72941_1
17/DNIeT/EE/DWS/JRN/2026-27
Open Tender
Civil Works - Water Works
Percentage
180 days
RANIRBAZAR
Please refer to the DNIeT
3 documents required · 3 mandatory
₹1,000
₹19,376
21 Aug 2026
14 May 2026
21 May 2026
14 May 2026
21 May 2026
14 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Labour Charge for lifting of 20000 / 15000 / 10000 / 7500 / 5000 / 2500 GPH capacity water vertical submerssible pump with motor sets including column pipes assembly by heavy duty chain pully block as per direction of the Engineer-in-charge. | 50 | Job | 3,000 | ₹1,50,000 |
| 2 | Labour Charge for fitting, fixing and lowering of 20000 / 15000 / 10000 / 7500 / 5000 / 2500 GPH capacity water vertical submerssible pump with motor sets including column pipes assembly by heavy duty chain pully block as per direction of the Engineer-in-charge. | 50 | Job | 3,000 | ₹1,50,000 |
| 3 | Supplying of 5000 GPH x 76 mtrs. Head water lubricated submersible pump of maximum 150 mm outer dia. With maximun 10 (ten) stages coupled with required wet and non-cover loading submersible motor suitable for 340-440 volts, 3 phase 50Hz, A.C. Supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq.mm joint less PVC 3 (Three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non- return valve cum discharge case including supplying of 10 Nos. suitable cable guard with clips & nuts & bolts, 2 (two) pair M.S. column clamps as per direction of Engineer-in-charge conforming to terms & conditions of the contract. (Each pump with motor shall consists of stainless stell closed type impeller , C.I. bowl, C.I discharge case, pump shaft (styainless steel), bush (bronze), shaft sleeve (bronze/chromium), sand guard, winding rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes). | 3 | Nos | 31,499 | ₹94,497 |
| 4 | Supplying of 7500 GPH x 76 mtrs. Head water lubricated submersible pump of maximum 150 mm outer dia. With maximun 10 (ten) stages coupled with required wet and non-cover loading submersible motor suitable for 340-440 volts, 3 phase 50Hz, A.C. Supply and star delta method of starting along with 35 mtrs. x 2 x 3 x 4 sq.mm joint less PVC 3 (Three) core double length flat cable (continuous length) of suitable size fitted with submersible motor, suction case, strainer, coupling key, vertical non- return valve cum discharge case including supplying of 10 Nos. suitable cable guard with clips & nuts & bolts, 2 (two) pair M.S. column clamps as per direction of Engineer-in-charge conforming to terms & conditions of the contract. (Each pump with motor shall consists of stainless stell closed type impeller , C.I. bowl, C.I discharge case, pump shaft (styainless steel), bush (bronze), shaft sleeve (bronze/chromium), sand guard, winding rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes). | 2 | Nos | 50,449 | ₹1,00,898 |
| 5Installation of submerssible pump and suitable motor upto required depth with GI column pipe in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamp etc. as per required size and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run as per direction of the Engineer-in-charge ( pump, motor with cable, GI pipe will be issued by the Department at free of cost and fabrication of GI column pipe will be paid separately ). | |||||
| 5.01 | i. 5000/7500 GPH Capacity | 360 | Mtr. | 469.1 | ₹1,68,876 |
| 6Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. | |||||
| 6.01 | i) 6.0 sqmm | 100 | Mtr. | 446.3 | ₹44,630 |
| 6.02 | ii) 10.0 sqmm | 100 | Mtr. | 589 | ₹58,900 |
| 7Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-incharge. | |||||
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
finance_74226.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.65 MB
BOQ_74226.xls
BOQ • 0.27 MB
DNIT17.pdf
Tender Documents • 4.90 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .