S.R. K.Ka Shastri Government Collage at MCA Collage at Maninagar (East) Ahmedabad. (Repairing and Renovation of Brick work, Plaster work, Flooring work Doors-Windows work, Alu. Partition work, Fabrication work, Bathroom - Toilet repairing work, Colour work at other Misc. work)

Name of Work : S.R. K.Ka Shastri Government Collage & MCA Collage @ Maninagar (East) Ahmedabad. (Repairing and Renovation of

Brick work, Plaster work, Flooring work Doors-Windows work, Alu. Partation work, Febrication work, Bathroom - Toilet

repairing work, Colour work & other Misc. work)

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted according to

but may be In Figures In Words Estimated

more or less quantities

Demolition and disposal of unserviceable materials with all

Rupees Six Hundred Nine

lead and lift.(i) cement concrete.

1 3.00 609.26 And Paise Twenty Six Cum

Dismantaling tiled or stone floors laid in mortar including

Rupees Forty Seven And

2 484.00 stacking of serviceable materials and disposal of 47.72 Sqm

Paise Seventy Two Only

unserviceable materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and other Rupees One Hundred

3 36.00 attachment etc. complete and stacking them within all lead 187.71 Eighty Seven And Paise No

and lift.(i) Not exceeding 3 Sq.M. in area. Seventy One Only

Demolition of Brick work and stone masonry including

Rupees Five Hundred

stacking of serviceable materilas and disposal of

4 8.00 550.40 Fifty And Paise Forty Cum

unserviceable materials with all lead and lift.(ii) In Cement

Dismantling sanitary fittings like wash basin, W.C pan Indian Rupees Four Hundred

5 37.00 and European type, flushing tank etc including stacking the 405.65 Five And Paise Sixty Five No

materials with all lead and lift Only

Dismantaling C.I pipes, G.S.W pipes and A.C rain water

Rupees Seventy Four

pipes , PVC Pipes with fittings and clamps including stacking

6 529.00 74.77 And Paise Seventy Seven Rmt

the materials with all lead and lift (For any diameter of pipe)

Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materilas and disposal of Rupees Forty Seven And

unserviceable materials with all lead and lift.(i) G.I.sheet Paise Seventy Two Only

Removing and scraping of old deteriorated plaster of any

thickness from wall / R.C.C member including stacking of Rupees Nineteen And

serviceable material and disposal of unserviceable from site Paise Fifty Seven Only

of work with all lead and lift

Excavation for foundation upto 1.5 m depth including sorting

Rupees Two Hundred

out and stacking of useful materials and disposing off the

9 8.00 203.83 Three And Paise Eighty Cum

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Filling available excavated earth (excluding rock) in trenches.

Rupees One Hundred

plinth, sides of foundations etc. in layers not exceeding

10 7.00 130.39 Thirty And Paise Thirty Cum

cm. in depth consolidating each disposited layer by ramming

Brick work using common burnt clay building bricks having

Rupees Four Thousand

crushing strength not less than 35 kg./Sq.Cm. in foundation

Two Hundred Ninety Five

11 8.00 and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) in 4295.99 Cum

And Paise Ninety Nine

superstructure above plinth level upto floor two level (B)

Conventional (upto 10 ton)

Providing and laying cement concrete 1:2:4 (1Cement: 2- Rupees Three Thousand

Coarse sand : 4- graded stone aggregates 20 mm nominal Six Hundred Ninety

size) and curing complete excluding cost of formwork in (A) Seven And Paise Ninety

Foundation and Plinth One Only

10mm the cement plaster on ceiling in single coat on fair

side of brick / concrete wall for interior plastering up to floor

Rupees One Hundred

two level finished even and smooth in C M 1:4 ( 1 cement

13 223.00 164.01 Sixty Four And Paise One Sqm

coarse sand) including finishing with a floating coat of neat

cement slurry. As directed by engg. in Charge. for all floor

15mm the cement plaster in single coat on fair side of brick /

concrete wall for interior plastering above floor two level Rupees Two Hundred

14 164.00 finished even and smooth in C M 1:4 ( 1 cement 4 coarse 205.37 Five And Paise Thirty Sqm

sand) including finishing with a floating coat of neat cement Seven Only

slurry. (upto 10 ton)

20 mm thick sand faced cement plaster on walls upto height

10 Mt. above ground level consisting of 12 mm thick backing

Rupees Three Hundred

15 47.00 coat of C.M. 1:3 ( 1 Cement : 3 Sand) and 8 mm thick 300.66 Sqm

And Paise Sixty Six Only

finishing coat of C.M. 1:1 (1 Cement : 1 sand) etc. complete.

Providing and applying 20 TO 25 mm thick Polymer Modified

Repair Mortar (PMM) for repair of damaged/spalled concrete

surfaces, including removal of loose and deteriorated

concrete, cleaning of exposed reinforcement, application of

approved anti-corrosive coating to reinforcement (where

required), surface preparation, and placing of polymer Rupees Eight Hundred

16 101.00 843.35 Forty Three And Paise Sqm

modified repair mortar, finishing to match existing surface,

curing, and all labour, materials, tools, plants, scaffolding, Thirty Five Only

transportation, handling, wastage and incidental works

complete as per specifications and as directed by the

Engineer-in-Charge

Providing and laying white/ coloured glazed tiles 6 to 8mm

thick in flooring treads of steps and landing laid on a bed of Rupees Nine Hundred

17 98.00 12mm thick cement mortar 1:3 (1-cement : 3- coarse sand ) 917.25 Seventeen And Paise Sq.M.

finishing with flush pointing in white cement. Twenty Five Only

Providing and laying coloured glazed tiles of the size 300 mm

x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm / 300 mm x Rupees One Thousand

600 mm x 8 mm in skirting, risers of steps and dedo on 10 Four Hundred Forty One

mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & And Paise Twenty Two

jointed with white cement slurry. Only

P & L 24" x 24" or 24" x 48" vitrified 8 to 10 mm thick tile

flooring over 20 mm (average) base of cement mortar 1:6 (1

cement: 6 coarse sand) on new surface or fixing on existing Rupees One Thousand

flooring by adhesive material including dismentaling of One Hundred Eighty Nine

existing flooring and jointed with color cement slurry including And Paise Eighty Eight

finised with flush pointing & cleaning the surface etc. Only

complete for light shade (upto 10 ton)

Providing and laying Vitrified tiles 8 to 10 mm thick in skrting Rupees One Thousand

risers of steps and dedo on 10mm thick cement plaster 1:3 (1- Five Hundred Thirty Eight

cement : 3- coarse sand) and jointed with white cement slurry And Paise Eighty Five

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

Rupees Nine Hundred

coarse sand) laid over and jointed with grey cement slurry

21 40.00 992.66 Ninety Two And Paise Sqm

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick (upto

Providing and laying Granite slab (18 mm thick) one side

polished flooring as directed by engineer in charge over 20 Rupees Two Thousand

mm (average) base of cement mortar 1:6 (1 cement : 6 Three Hundred Twenty

coarse sand) or L.M 1:1.5 laid and jointed with grey cement Seven And Paise Four

slurry including rubbing and polishing complete Only

Providing and laying Ceramic tiles 6mm to 8mm thick in

Rupees Nine Hundred

flooring treads of steps and landing laid on a bed of 12mm

23 84.00 970.07 Seventy And Paise Seven Sqm

thick cement mortar 1:3 (1-cement : 3- coarse sand ) finishing

with flush pointing in white cement.

Providing and fixing polished granite stone slab for

window/door sill & jamb of approved colour and shade,

machine cut and edge polished, of required size and

Rupees Two Thousand

thickness (generally 18–20 mm), laid over a bed of 12 mm

24 19.00 2082.67 Eighty Two And Paise Sqm

thick cement mortar 1:3 (1 cement : 3 coarse sand), including

Sixty Seven Only

necessary cutting, edge finishing, curing, and all complete as

directed by Engineer-in-charge.

Providing and laying Both side mirror polished Granite stone

Rupees Two Thousand

slab 18 mm (Average) thick of approved quality incl. full

Six Hundred Eighteen

25 5.00 molded around front edge fixed in the wall for partition and 2618.93 Sqm

And Paise Ninety Three

jointed with grey cement slurry including rubbing and

polishing etc. complete

Applying two coats of Birla (white cement based) or Asian

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to give Rupees Forty And Paise

an even shade including thoroughly brushing the surface free Fifty Nine Only

from mortar dropping and other foreign matter and sand

papered smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall Rupees Seventy Nine

27 230.00 surface to give an even shade including throughly brushing 79.22 And Paise Twenty Two Sqm

the surface free from mortar droppings and other foreign Only

matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even

Rupees One Hundred

shade after thoroughly brushing the surface to remove all dirt,

28 138.00 114.53 Fourteen And Paise Fifty Sqm

and remains of loose powdered materials.etc complete

Providing and fixing eco-friendly light weight calcium silicate

false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation .

The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC value of

0.5 & Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level Rupees One Thousand

suspended inter locking metal grid of hot dipped galvanized Six Hundred Forty Eight

steel sections (galvanizing @120 grams per sqm including And Paise Ninety Six

both side) consisting of main ‘T’ runner suitably spaced at Only

joints to get required length and size of 24X38mm made from

0.30 mm thick (minimum) sheet, 1200mm centre to centre,

and cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid of

secondary cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick (Minimum) sheet

to be interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm resting on

Providing & Laying Synroof Hi Build 2 mm thick

ecectrometric, premium qulity acrylic coating as a water

proofing membrance finished which consists a coat of Bituen

primer & 80 CSM membrane on terrace with ultra violet

resitance and working upto any height arresting water Rupees Five Hundred

30 52.00 leakages including removing and scrapping terrace surface 568.63 Sixty Eight And Paise Sqm

having water proofing treatment, if any etc. and thoroughly Sixty Three Only

brushing the surface to remove all dirt, and remains of loose

powdered materials. etc complete as per detail specification

& as directed by Engineer-in-charge.

Providing and fixing standard Powder coated aluminium

frame section equivalent to Jindal Section no:8688 for sliding

three track windows (2 float glass shutters + 1 SS Mosquito

net shutter) having Powder coated Alluminium Vertical Rupees Three Thousand

Shutter Section 8948 with 5 mm thick transparent tinted float One Hundred Eighty Four

glass, rubber gasket, Air strip and finishing joints with silicon And Paise Eighty Five

sealent with standadrd extruded colour anodized aluminium Only

coated fittings, fixtures and locking arrangements as directed

and approved by the Engineer in Charge etc. complete.

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

Kg/mt, vertical member of size 61.85 mm x 31.75mm x

mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal Rupees One Thousand

32 43.00 member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, 1713.70 Seven Hundred Thirteen Sqm

vertical member of size 40mm x 18mm x 1.29mm @ wt.of And Paise Seventy Only

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

Providing and fixing standared extruded of alluminium section

Rupees One Thousand

of size 63mm x 38.10mm x 1.2mm @ Wt.0.643 Kg/mt with

One Hundred Seventy

33 3.00 colour anodized alluminium frame for ventilation with 5mm 1175.56 Sqm

Five And Paise Fifty Six

thick frosted glass as details etc complete for Ventilation

Providing and fixing 35 mm thick shutters for flush door with

Rupees Two Thousand

front and back laminate sheet 1 mm thick fixed in pattern as

Seven Hundred Eighty

34 8.00 given by Architect including SS plated fixtures and fastening 2782.55 Sqm

Two And Paise Fifty Five

including painting of frames edges of doors etc. comp. as

directed by Engineer-in-charge.

Providing and fixing FRP frame size 100x50 mm and 28mm

thick FRP shutter having extra reinforcement on sides &

edges in gel coat finish. The core of the shutter & frame is to

be filed up with injected polyurethene foam done in situ Rupees Two Thousand

alongwith embedded wooden pieces for stiffening & also Three Hundred Seventy

taking hinges & fintures. The whole FRP frame & shutter is to Seven And Paise Seventy

be water proof weather proof, termite proof & resistance to Six Only

mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium S.S fixtures & fastenings &

fastener sleeve.

Providing and fixing powder coated alluminium standed

section fully paneled fixed type partition having 1.00 cm x

1.05mm size grid of alluminium section 63.50 x 38.10 x

mm panels of 12mm thick both side interior grade I.S, Mark

pre-laminated particle board or Glass 8mm of approved make

and shape incl. providing openable doors and windows Rupees One Thousand

36 80.00 1944.51 Nine Hundred Forty Four Smt

(swing/sliding type shutter) as and where required and as

directed by engineer in charge incl. fixing in ture line and level And Paise Fifty One Only

at bottom panel top and bottom incl. all fixture and fastening

like glazing clips gasket & hardware and labour as required

Providing and fixing 4mm thick sheet glass ordinary quality

fixed in alluminum section frame with rubber gasket & Rupees Six Hundred

37 27.00 transparent silicon sealant glass fixing to frame including the 686.52 Eighty Six And Paise Fifty Sqm

cost of all material and necessary cutting of glass. Two Only

Providing and fixing 12 mm thick interior grade bothside

Rupees Eight Hundred

prelaminated particle board including removing damaged

38 47.00 862.54 Sixty Two And Paise Fifty Sqm

board and fixing etc. with all materials and labour etc. comp.

Providing and fixing FRP (1.8mm Thick) sheet with nuts, bolts

Rupees Four Hundred

etc and fixing on M.S steel structure incl. cutting,trimming ,the

39 131.00 411.64 Eleven And Paise Sixty Sqm

cost of all labour and materials etc. comple

Providing, fabricating, supplying and fixing panels of

aluminium composite panel cladding of approved colour

shade,make and made out of 4mm thick aluminium

composite panel material consisting of 3mm thick FR grade

mineral core sandwiched between two Aluminium sheets

(each 0.5mm thick). The aluminium composite panel cladding

sheet shall be coil coated, with PVDF / Lumiflon based Rupees Three Thousand

40 72.00 fluoropolymer resin coating of approved colour and shade on 3557.09 Five Hundred Fifty Seven Sqm

face # 1 and polymer (Service) coating on face # 2 using And Paise Nine Only

stainless steel screws, nuts, bolts, washers, cleats, weather

silicone sealant, backer rods etc. including labour,

transportation, scafolding and materials chareges for all

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings Rupees One Hundred

41 156.00 and frame alround, square or round bars with round headed 101.17 One And Paise Kgs

bolts and nuts or by screws (A) Plain Grill. (upto 10 ton) Seventeen Only

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

Rupees Seven Hundred

with bitumen and G.I. limpet washer or G.I. limpet washer.

42 61.00 727.13 Twenty Seven And Paise Sqm

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet

Steel work welded, in built up sections, framed work incl.

cutting, hoisting, fixing in position and applying a priming coat

of red lead paint for window, vent and shed work. Using Rupees Eighty Four And

channels angles, tees, flats, pipes, Ez-7 or F4B section etc. Paise Thirteen Only

complete.as directed by engineer-in-charge.

Applying Priming coat & Painting two coats over new steel

and other metal surfaces with enamel paint, brushing, interior Rupees One Hundred

44 205.00 to give an even shade including cleaning the surface of all 122.49 Twenty Two And Paise Sqm

dirt, dust and other foreign matter. Forty Nine Only

Painting two coats (excluding priming coat) on previously

painted steel and other metal surfaces with enamel paint, Rupees One Hundred

45 116.00 brushing, interior to give an even shade including cleaning 105.80 Five And Paise Eighty Sqm

the surface of all dirt, dust and other foreign matter. Only

Painting two coats (excluding priming coat) on new wood and

wood based surface with enamel paint, interior to give an Rupees Eighty Seven

46 27.00 even shade including cleaning the surface of all dirt, dust and 87.98 And Paise Ninety Eight Sqm

other foreign matter sand papering and stopping. Only

Painting Two coat (excluding priming coat) on previously

painted wall or wood and wood based surfaces with enamel Rupees One Hundred

47 200.00 paint, interior to give even shade including cleaning oil, 108.03 Eight And Paise Three Sqm

grease, dirt and other foreign matter. Only

Providing, removing & refixing 60 mm thick high density

homogeneous inter locking or non intrelocking grey or colour

base paver block including providing new one as per

requirement of paver block of homogeneous grey or colour

Rupees Two Hundred

smooth finish having grade minimum M 200 or higher of

48 37.00 274.72 Seventy Four And Paise Sqm

approved shape with good finishing and 75mm (avg) thick

Seventy Two Only

sand layer including consolidation of the same etc. complete

in pattern and design or sample approved by Engineer in

charge etc complete.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height and

15cm thick of M250 grade concret as per approved design Rupees Three Hundred

49 37.00 and including excavation for fixing in proper line and 361.64 Sixty One And Paise Sixty Rmt

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc Four Only

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be Rupees Seventy Two And

concealed as directed including necessary fittings etc. Paise Sixty Five Only

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be Rupees Ninety One And

concealed as directed including necessary fittings etc. Paise Eighty Four Only

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

Rupees One Hundred

wall with the help of clamp at every two metre C/C or shall be

52 116.00 148.12 Forty Eight And Paise Rmt

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

Rupees One Hundred

wall with the help of clamp at every two metre C/C or shall be

53 74.00 195.67 Ninety Five And Paise Rmt

concealed as directed including necessary fittings etc.

Sixty Seven Only

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside

Rupees One Hundred

Dia. Low densidy, complete with special flange compression

54 50.00 122.21 Twenty Two And Paise Rmt

type fittings, wall clipsetc. including making good the wall

Twenty One Only

ceiling and floor.(A) 50 mm

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside

Rupees One Hundred

Dia. Low densidy, complete with special flange compression

55 48.00 182.25 Eighty Two And Paise Rmt

type fittings, wall clipsetc. including making good the wall

Twenty Five Only

ceiling and floor.(A) 75 mm

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside

Rupees Two Hundred

Dia. Low densidy, complete with special flange compression

56 45.00 296.44 Ninety Six And Paise Rmt

type fittings, wall clipsetc. including making good the wall

Forty Four Only

ceiling and floor.(A) 110 mm

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Rupees One Hundred

Foundation (NSF) seal for potable water of following dia.

57 64.00 166.86 Sixty Six And Paise Rmt

nominal bore tube fittings and clamps including making good

Eighty Six Only

the wall, ceiling and floor etc. complete.[C] 15 mm dia.

Providing and fixing wash down water closet European type

W.C. pan with integral P or S trap incl. jointing the trap with Rupees One Thousand

58 6.00 soil pipe in cement mortar 1:1 (1 cement : 1 fine sand) and 1595.04 Five Hundred Ninety Five Nos

plastic seat cover for wash down water closet with C.P. And Paise Four Only

Brass hinge incl. Buffers.

Providing and fixing water closet squatting Pan (Indian type

W.C. Pan) size 580mm (A) Vitreous China.(I) Long pattern =

White colour with Providing and fixing 100mm size P or S trap Rupees One Thousand

59 5.00 for water closet squatting pan including jointing the trap with 1250.33 Two Hundred Fifty And Nos

the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1- Paise Thirty Three Only

Fine sand)(A) Vitreous China.

Providing and fixing urinal of approved quality including

Rupees One Thousand

connecting the urinal with waste pipe, trap etc. complete (A)

60 16.00 1036.27 Thirty Six And Paise Nos

White earthenware flat back or corner type size 430 mm x

Twenty Seven Only

Providing and fixing 15 mm Urinal Spreader Cat No 186 of Rupees One Hundred

61 16.00 make Prayag or as equivalent as approved by Engineer-in- 189.77 Eighty Nine And Paise Nos

charge . Seventy Seven Only

Providing and fixing Corrugated Waste Pipe Cat No 327 of

Rupees Ninety Five And

62 16.00 make Prayag or as equivalent as approved by Engineer-in- 95.95 Nos

Paise Ninety Five Only

Providing and fixing PVC Connection 12"/300 mm size Cat Rupees One Hundred

63 16.00 No 321 of make Prayag or as equivalent as approved by 114.14 Fourteen And Paise Nos

Engineer-in-charge . Fourteen Only

Providing and Fixing Push Flush Valve (Concealed Body) Rupees Two Thousand

with Exposed Shut Off provision round flange (3.0/6.0 Lts. Two Hundred Ninety Nine

Per Flushing) including all fixtures and fastners as approved And Paise Seventy Seven

by Engineer-in-charge Only

Providing and fixing screw down bib taps of following size.(A) Rupees One Hundred

65 20.00 Brass screw down bib tap polished bright. (i) 15mm dia. 186.83 Eighty Six And Paise No

Eighty Three Only

Providing and fixing wash basin with single hole for pillar tap

with C.I. or M.S. brackets painted white incl. cutting holes and

Rupees One Thousand

making good the same (A) vitreous china (ii) Flat back wash

66 10.00 1482.09 Four Hundred Eighty Two Nos.

basin 550 mm x 400 mm size (i) in white colour with C.P.

And Paise Nine Only

brass waste for wash basin 32 mm dia.

Providing and fixing pillar tap, capstan head, screw down

Rupees Three Hundred

high pressure with screws, shanks and back nuts. (i) 15mm

67 10.00 308.73 Eight And Paise Seventy Nos.

Providing and fixing C.P. Angle stop cock of 15mm dia of Rupees Five Hundred

68 15.00 approved quality including fixing in pipe line etc. as per 515.39 Fifteen And Paise Thirty Nos

Engineer in charge. Nine Only

Providing and fixing 600 mm x 450 mm bevelled edge mirror

Rupees Eight Hundred

of superior glass mounted on 6 mm thick A.C sheet or

69 10.00 833.73 Thirty Three And Paise Nos

plywood sheet and fixed to wooden plugs with C.P brass

Seventy Three Only

screws (B) 600 mm x 20 mm size.

Providing and fixing C.P brass towel rail complete with c.p. Rupees Six Hundred

70 10.00 brass bracket fixed to wooden plug with c.p. brass screw (B) 603.19 Three And Paise No

600mmx20mm size Nineteen Only

Providing and fixing Brass ball valve of 25mm dia of approved Rupees Four Hundred

71 6.00 quality including fixing in pipe line etc. as per Engineer in 447.18 Forty Seven And Paise No

charge. Eighteen Only

Providing and fixing Brass ball valve of 40mm dia of approved Rupees Five Hundred

72 8.00 quality including fixing in pipe line etc. as per Engineer in 574.94 Seventy Four And Paise No

charge. Ninety Four Only

Providing and fixing Hand shower (Health Faucet) 1 meter

Rupees Seven Hundred

PVC Tube with including necessary hardware and other

73 10.00 736.28 Thirty Six And Paise No

consumable and labor etc complete. as approved by engg. in

Twenty Eight Only

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

75 mm diameter with jali of the following nominal diameter of Rupees Five Hundred

74 10.00 self cleansing design with C.I scread down or hinged grating 558.36 Fifty Eight And Paise Nos.

including the cost of cutting and making good the walls. Thirty Six Only

Providing and fixing in position collapsible steel shutters with

vertical channels 20 x 10 x 2 mm braced with flat iron

diagonals 20 x 5 mm size with top and bottom rails of T_rin Rupees Five Thousand

75 12.00 40x 40 x 6 mm with 38mm dia, steel pulleys complete with 5445.14 Four Hundred Forty Five Smt

bolts, nuts, locking arrangements, stoppers handles including And Paise Fourteen Only

applying a priming coat of red lead paint.

Repairing of Existing Rolling Shutter including

replacement/repair of springs, bearings, guide channels, Rupees Thirteen

damaged laths, welding, alignment, oiling, greasing and all Thousand Two Hundred

necessary materials, labour, tools and tackles complete in all Twelve And Paise Eighty

respects, as directed by the Engineer-in-Charge. Two Only

Rupees Twenty Five Lakh(s) Twenty Nine Thousand Five Hundred Sixty Seven And Paise Fifty Four Only

I / We am / are willing to carry out the work at _________________ % above / below percent (Should be written in figures and words) of the

estimated rates mentioned above. Amount of my/our tender works out as under:

*Estimated Amount *Estimated Amount

Put to Tender Rs.________ Put to Tender Rs.________

Deduct _____% below Rs. ________ Add _____% above Rs. ________

Net Rs.________ Net Rs.________

*(Please strike out whicever is not applicable)

1 All work shall be carried out as per public works department handbook and other specification of division or as directed.

2 All the columns in schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his

3 Rates quoted include clearence of Site (prior commencement of work amd at its close) in all respects and hold good for work under all

conditions, site and moisture, weather etc.

4 To be continued on additional Sheets, if found necessary.

5 Credit of Dismanteled Materials amounr Rs.13150 Deducted from 1st R.A. Bill

Deputy Executive Engineer

Dated Signature of the contractor Cons. (R&B) Sub – Division No-1