REPAIR AND MAINTENANCE TO BLDGS OF DEMO-1, GD PL, JCOS MESS AND OTHER LOC IN LOWER AREA OF NORTH COMPLEX UNDER AGE B/R-II AT IMA DEHRADUN

Amount

M&L for Complete removing of existing treatment from wall / ceilling by using mechanical sander/grinder complete all as specified and directed.

M&L for applying 3mm thick damp proof wall care putty, Preparation of puttied wall/ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed.

M&L for Preparation of old plastered surfaces of walls / ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of oil emulsion distemper on walls/ceiling using mechanical sander/grinder complete all as specified and directed.

M&L for Preparation of surfaces of wall / ceiling and applying two coats of weather coat exterior paint over a coat of primer and over a coat of 3mm thick white cement base water proof putty including sanding/grinding complete all as specified and directed (work to be carried upto a height of 7.5m). Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+

M&L for Preparation of old surfaces of wall / ceiling and applying two coat weather coat exterior paint complete all as specified and directed (work to be carried upto a height of 7.5m). Make : Asian paints Apex Ultima/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+

M&L for Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

M&L for Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (except bricks) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed.

M&L for Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L in repair Drapery rod in any length, high strength stain less steel pipe having outer dia 20-25mm a pair of brackets & a pair of stainless steel finials for every rod length as required at site complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed

Taking down steel window shutter n.exc 1 sqm and refixing in the same opening after replacement of broken hinges including welding, grinding, painting etc each complete all as specified and directed

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

S&F 2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed

M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed

M&L for Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed blocks etc for embedding hold fasts complete all as specified and directed

S&F in repair Solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed.

S&F 35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc complete all as specified and directed.

S&F double rebated Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including 3mm thick frosted glass panes fixed with glazing oil putty and wire mesh complete all as specified and directed.

S&F factory made 40 mm thick IInd class HW plain framed panelled shutter (any numbers of panel) with lock rail &panel of 9mm B.W.P. commercial ply or12mm veneered particle board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated all as specified

S&F 30mm thick flush shutter solid core construction with partical board core and plywood face panels commercial type on both sides complete all as specified and directed

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners complete as per dirn of Engr-in-Charge. (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made).

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners complete as per dirn of Engr-in-Charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge.

M&L 35mm thick factory made solid WPC (Wood plastic composite) moulded gauged door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacturer instruction complete all as specified and complete all as specified and directed.

S&F aluminium powder coated frame for fixed partition of section 47.62mm x 44.45x1.6 mm thick, shutter glazed with tinted glass (Modi Guard) 5mm thick fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight all as per IS 737-1986 complete all as specified and directed.

S&F aluminium powder coated door fixed on aluminium frame of section 47.62mm x 44.45x1.6 mm thick, shutter glazed with tinted glass 5mm thick fixed with rubber gasket and aluminium strips as per standard method with cast type handle aluminium anodised of 150mm size 2 Nos (One on each side of shutter), hydraulic door closer, aluminium tower bolt arrangement of standard make with locking arrangement of mortise lock(brass body) of size 100mm and butt hinges, door stopper etc complete all as specified and directed.

S&F Butt hinges, 100 mm long, extruded stainless steel medium weight hinges with hinge pin anodised and fixed complete all specified as directed

S&F in repairs 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks/wooden beads or galvanized wire staplescomplete all as specified and directed

S&F 4mm thick sheet glass ordinary quality & glazing with oil putty in squares not exc 0.5 Sqm in each pane including hacking out old broken glass pane of any thickness complete all as directed.

S&F 4mm thick frosted sheet glass ordinary quality & glazing with oil putty in squares not exc 0.5 Sqm in each pane including hacking out old broken glass pane of any thickness complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Vitrified ceramic coloured tiles 8 to 9 mm thick (Square or rectangular) polished, area of each tile n exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured of cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 450x300x7-8mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour grout to match including rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 for receiving wall tiles and dismantling of existing tile complete all as directed.

S&F in repair reinforced PVC connection 15 mm size with brass nuts of length 450 mm complete all as specified and directed.

S&F CP brass hot & cold single lever basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB complete all as directed by Engineer-in-charge. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flanges in complete all as specified. Make : Jaquar Opal Prime Series/Cera Ruby series/Somany Bellis series

S&F 15mm bore long body bib cast copper alloys tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F in repair CP Health faucet telephonic type with CP with 1.5m long flexible pipe.

S&F in repair CP brass overhead shower square fancy type 100x100 mm with extension CP Arm pipes.

S&F in repair stainless steel towel ring fixed with screw in wall complete all as directed.

S&F in repair stainless steel towel rail, 600mm long.

M&L for Rendering 15 mm thick in cement mortar (1:4) using coarse sand on brick or concrete surface finish even and fair finishing, curing scaffolding including mixing of water proofing compound and taking down of existing cement plaster etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar (1:6) using coarse sand on brick or concrete surface finish even and fair finishing, curing scaffolding including taking down of existing cement plaster etc complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 20 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints and necessary formwork and demolition of existing concrete complete all as directed

M&L for welded steel wire fabric weight n exc 4kg/sqm fixed/welded to wood or steel members complete all as directed.(Weight shall be as certained by a Board of Officers.)

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) pointing in white cement (1:2) using marble dust and half rounding of exposed edges including taking down of existing shelf complete all as specified and directed.

S&F PVC (SWR) 110mm dia pipes single socketed 6Kg/CM2 pressure rating in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC (SWR) 75mm dia pipes single socketed 6Kg/CM2 pressure rating in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC bends fitted with oval access doors 75/100 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

S&F PVC (SWR) bends 110mm dia fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC (SWR) floor trap 100mm dia, plain with grating jaali including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc including taking down existing steel tubing complete all as directed.

S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc including taking down existing steel tubing complete all as directed.

S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 15/20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank complete all as specified and directed.

S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 15/20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S&F 2000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 15/20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S&F in repair Ball valve 15/20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as specified and directed.

S&F in repair 15mm GI Elbow/union/socket/Tee nipple (ISI marked) for plumbing complete all as specified and directed.

S&F in repair 15mm GI long screw (ISI marked) for plumbing with all accessories complete all as specified and directed.

S&F in repair 15mm PVC bib tap (ISI marked) for plumbing with all accessories complete all as specified and directed.

S&F in repair 15mm CI bib tap (ISI marked) for plumbing with all accessories complete all as specified and directed.

S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white including seat cover with necessary PVC pipe fittings fixed in repair complete all as specified and directed.

M&L for Vitreous China Urinal, half stall type, white including Urinal spreader of any colour for including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, suitable for urinals all as directed.

S&F in repair Vitreous china wash basin, white, flat back, size 550x400mm including bracket waste pipe and coupling complete all as directed.

S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

M&L for 300x300x25mm heavy duty Chequered cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall etc fixed in repairs complete all as directed. (Pattern of sheet as approved by GE).

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, gutter fixed in repairs complete all as directed by Engr-in-charge.

Dismantling existing timber scantling in any position complete all as specified and directed.

S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W (Gde E- 250) quality B).

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 40mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of old concrete complete all as specified and directed.

M&L in repair machine cut Kota stone 20 to 25 mm thick incl 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing to be matched with existing kota floor complete all as directed.

S&F Mirror polishing on marble/granite/ Kota stone/stone work where ever required to give high gloss finish complete all as directed.

M&L for Non skid/capsule pattern fully vitrified coloured tiles 8 to 9mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. Note :- Colour as approved by GE.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework including taking down existing boards any thickness etc complete all as directed

M/s Vinod Singh Negi (BID ID -3296057)

ACE BUILDERS AND CONTRACTORS (BID ID -3300954)

Aggrawal Builders and Furnishers (BID ID -3295792)

ADEPT INFRA SOLUTIONS (BID ID -3293601)

Sharda Enterprises (BID ID -3300731)

Meher enterprises (BID ID -3296329)

Alankar Traders (BID ID -3300625)

venus engineers (BID ID -3296117)

Amit Traders (BID ID -3301291)

Bhanu Prakash (BID ID -3296206)