REPAIR / REPLACEMENT TO CGI/ PGI ROOFING, PANELING AND CEILING TO CERTAIN BUILDINGS AT TRANSIT CAMP PALCHAN

Amount

Dismantling wall and ceiling board,of any description complete all as specified and directed by Engr-in-Charge

M&L for 12 mm thick perforated particle board of any size fixed with screws to timber frame as in ceilings complete all as specified and directed by Engr-in-Charge( The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition. (Note : Frame work if replaced shall be paid separately)

All as per ser item No. 2.00 above but except boarding.

M&L for 4mm thick Asbestos cement plain boards as in ceiling fixed with screws to framework complete all as specified and directed by Engr-in-Charge. ( Note: The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition.

All as per ser item No. 4.00 above but except boarding.

M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling/Walls including necessary lipping at end and corner complete all as specified and directed by Engr-in-Charge. (Note: The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition) complete all as specified and directed by Engr-Charge

M&L for Anodised aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm complete all as specified and directed.

Dismantling plain or corrugated steel sheeting , any gauge, thickness roof coverings complete all as specified and directed by Engr-in-Charge.

S&F 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs wall etc with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge

S&F coloured pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including necessary washers etc complete all as specified and directed by Engr-in-Charge

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Closing bolt holes etc in old corrugated sheets by sealing with one bitumen and one curved GI washer on either side and 6 MM GI bolts and nuts,all set in stiff white lead all as specefied and directed.

Dismentling timber in fillets,rails,posts,rafter ,purlin etc under 40 Sqcm in section,complete all as specified and directed by Engr-in-Charge.

S & F for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work as in wall panelling including necessary lipping at the ends and corners as directed complete all specified and directed.

S & F for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work as in ceiling including necessary lipping at the ends and corners as directed complete all specified and directed.

S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area Exc 13 and not Exc 25 Sqcm all as specefied.

S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area Exc 6 Sqcm and not Exc 13 Sqcm complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of new surfaces and applying two coats of synthetic enamel paint over a coat of primer as in ceiling complete all as specified and directed by Engr-in-Charge

Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge

S&F roof truss (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified eg framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. conforming to Fe-410, Gde E-250 Quality-A complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, all as specified and directed by Engr-in-Charge.

M&L for preparation of new ceiling surfaces of any description over 10cm in width or girth not otherwise described and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old surfaces of ceiling of any description over 10cm in width or girth not otherwise described and applying one coats of white wash complete all as specified and directed by Engr-in-Charge.

M & L for Rendering 15 mm thick cement mortar (1:6) on fair faces of brick /stone masonary or concrete block wall surfaces, complete all as specified and directed.

M&L for two coats of oil bound distemper on walls on newly plastered surfaces including preparation of surfaces by brooming or by steel wire brushing and complete all as specified and directed.

M/s Parmod Kumar

SP Builders

SAFFRON CONSTRUCTION CO.