Kerala

AOC

Works

Civil Works - Buildings

MAINTENANCE OF PERIYA CHC

Local Self Government Department

PERIYA | Wayanad, Kerala

Amount: ₹7.0 LCloses: 29 Oct 2025Closed

Timeline

Published17 Oct 2025
Closed29 Oct 2025
Awarded4 May 2026

Bids

Item Rate

2 Bids4 May 2026

#	Company	Amount	Rank	Status
1	SANTHOSH MATHEW L1₹5.9 LAccepted-AOC	₹5.9 L	L1	Accepted-AOC LOWEST QUOTED
2	KDS engineering construction L2₹6.0 L+₹7,662.09 (1.30%)Rejected-AOC	₹6.0 L+₹7,662.09 (1.30%)	L2	Rejected-AOC HIGHEST QUOTED

BoQ Comparative

Line Items (16)

Sl No	Description	Qty	Unit	SANTHOSH MATHEW L1	KDS engineering construction L2
1.00CHC Building maintenance
1.00	15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm	11.98	sqm	70.1 ₹840.15 Lowest	75 ₹898.88
1.00	15.19:Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.	144	kg	3.68 ₹529.92 Lowest	4 ₹576
1.00	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	18	sqm	157.57 ₹2,836.26 Lowest	160 ₹2,880
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	1,008.23	kg	172.83 ₹1,74,251.53 Lowest	174.58 ₹1,76,015.92
1.00	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	134.43	sqm	778.14 ₹1,04,605.36 Lowest	786 ₹1,05,661.98
1.01	13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.	99	sqm	18.93 ₹1,874.07 Lowest	22 ₹2,178
1.01	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	254	sqm	74.71 ₹18,976.34 Lowest	75.46 ₹19,166.84
1.01	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	254	sqm	159.74 ₹40,573.96 Lowest	161.35 ₹40,982.9
1.01	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	51.3	sqm	152.33 ₹7,814.53 Lowest	160 ₹8,208

Corrigenda

Corrigendum

1 updatesLatest on 30 Oct 2025Submission Ends:29 Oct 202531 Oct 2025

Date changes

Download Ends29 Oct 202531 Oct 2025Submission Ends29 Oct 202531 Oct 2025

Tender Value

₹7.0 L

EMD Value

₹14,850

Closing Date

29 Oct 2025, 5:00 pmClosed

Tender Inviting Organisation

Name

ASSISTANT ENGINEER

Address

LID and EW SUBDIVISION MANANTHAVADY BLOCK

Work Description

MAINTENANCE OF PERIYA CHC

Tender Information

Tender ID

2025_LSGD_806922_1

Reference Number

AEE/TND/25-26/04/78

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

PERIYA

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredScanned copy of Preliminary Agreement upload below 1MB (.pdf)

RequiredScanned copy of E payment form upload below 1MB (.pdf)

RequiredScanned copy of Integrity Pact Certificate upload below 1MB (.pdf)

RequiredScanned copy of Affidavit upload below 1MB (.pdf)

RequiredScanned copy of Form of Tender upload below 1MB (.pdf)

RequiredSBD Form With Nit Merged (.pdf)

RequiredBidder Valid Registration Certificate upload below 1MB (.pdf)

RequiredGST REG COPY upload below 1MB (.pdf)

RequiredNIT upload below 1MB (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,315

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹14,850

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

4 May 2026

Published

17 Oct 2025

Bid Opening

31 Oct 2025

Download Starts

17 Oct 2025

Download Ends

29 Oct 2025

Submission Starts

17 Oct 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.06 MB

Work Item Documents

AFFIDIVIT.pdf

Tender Documents • 0.03 MB

ipact.pdf

Tender Documents • 0.04 MB

epaymentform.pdf

Tender Documents • 0.05 MB

BOQ_1344497.xls

BOQ • 0.26 MB

Formtender.pdf

Tender Documents • 0.18 MB

priliminoryagt.pdf

Tender Documents • 0.03 MB

viewsbd.pdf

Tender Documents • 1.63 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SANTHOSH MATHEW

L1₹5.9 LAccepted-AOC

KDS engineering construction

L2₹6.0 L+₹7,662.09 (1.30%)Rejected-AOC

Sl No	Description	Qty	Unit	SANTHOSH MATHEW L1	KDS engineering construction L2
1.00CHC Building maintenance
1.00	15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm	11.98	sqm	70.1 ₹840.15 Lowest	75 ₹898.88
1.00	15.19:Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.	144	kg	3.68 ₹529.92 Lowest	4 ₹576
1.00	15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet	18	sqm	157.57 ₹2,836.26 Lowest	160 ₹2,880
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	1,008.23	kg	172.83 ₹1,74,251.53 Lowest	174.58 ₹1,76,015.92
1.00	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	134.43	sqm	778.14 ₹1,04,605.36 Lowest	786 ₹1,05,661.98
1.01	13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.	99	sqm	18.93 ₹1,874.07 Lowest	22 ₹2,178
1.01	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	254	sqm	74.71 ₹18,976.34 Lowest	75.46 ₹19,166.84
1.01	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	254	sqm	159.74 ₹40,573.96 Lowest	161.35 ₹40,982.9
1.01	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	51.3	sqm	152.33 ₹7,814.53 Lowest	160 ₹8,208

Sl No

Description

Qty

Unit

SANTHOSH MATHEW

KDS engineering construction

1.00CHC Building maintenance

1.00

15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

11.98

sqm

70.1

₹840.15

Lowest

₹898.88

1.00

15.19:Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.

144

3.68

₹529.92

Lowest

₹576

1.00

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

sqm

157.57

₹2,836.26

Lowest

160

₹2,880

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

1,008.23

172.83

₹1,74,251.53

Lowest

174.58

₹1,76,015.92

1.00

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

134.43

sqm

778.14

₹1,04,605.36

Lowest

786

₹1,05,661.98

1.01

13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

sqm

18.93

₹1,874.07

Lowest

₹2,178

1.01

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

254

sqm

74.71

₹18,976.34

Lowest

75.46

₹19,166.84

1.01

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

254

sqm

159.74

₹40,573.96

Lowest

161.35

₹40,982.9

1.01

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

51.3

sqm

152.33

₹7,814.53

Lowest

160

₹8,208