MAINTENANCE OF ROOF, TILE, PLUMBING, FLASE CEILING AND MISC BR WORKS FOR OR AND KEY PERSONAL ACCN INCLUDING REPAIR/ MAINTENANCE OF WATER SUPPLY RISING AND DISTRIBUTION LINE, INCLUDING ALL ACCESSORIES AND CHLORINATION OF WATER SUPPLY AT MIL STN NAHAN

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces , finished even and fair without using extra cement on walls in cement mortar1:4, (using WPC) complete all as specified and as directed. Note:- WPC shall be measured and paid seprately.

M&L rendering 15 mm thick on brick work or concrete surfaces, finished even and smooth without using extra cement on walls in cement mortar 1:6, in patches complete all as specified and as directed.

M&L rendering 10 mm thick cement plaster in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of exterior grade acrylic emulsion paint over a coat of primer and over and including layer not less than 1.0mm thick of wall care putty complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of acrylic distemper/ distemper oil emulsion (OBD) over and including 2mm thick wall care putty in any pattern complete all as specified and as directed.

M&L for preparation and applying three coats of white wash on new surfaces of ceiling complete all as specified and as directed.

M&L for preparation and applying one coat of white wash on old wall surfaces complete all as specified and as directed.

M&L for preparation and applying one coat of white wash on ceiling old surfaces complete all as specified and as directed.

M&L for preparation and applying one coat of cement base paint on old wall surfaces including wetting and curing, complete all as specified and as directed.

M&L for preparation and applying one coat of exterior grade acrylic emulsion paint on old wall surfaces in any pattern complete all as specified and as directed.

M&L for preparation and applying two coats of cement base paint on old wall surfaces after complete removed of existing treament including wetting and curing, complete all as specified and as directed.

M&L for preparation and applying one coat of acrylic distemper/ distemper oil emulsion (OBD) on old wall/ceiling surfaces complete all as specified and in any pattern as directed.

M&L for preparing & finishing walls with acrylic smooth exterior paint of required shade(New work)(Two or more coats applied @1.67ltr/10 Sqm over and including priming coat of exterior primer applied @2.20 kg/Sqm complete all as specified and as directed.

M&L for two coats of acrylic distemper/ distemper oil emulsion (OBD) on old wall surfaces including complete removal of existing treatment and all necessary preparation with and incl priming plastered surface over 2mm thick wal care putty, complete all as specified.

M&L for two coats of acrylic distemper/ distemper oil emulsion (OBD) on old ceiling surfaces including complete removal of existing treatment and all necessary preparation with and incl priming plastered surface over 2mm thick wal care putty, complete all as specified.

M&L for preparation of new steel surfaces of any description, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation and applying one coat of synthetic enamel paint over old painted wooden or wood based surfaces of any description, not otherwise described over 10 cm width or girth, complete all as specified and as directed.

M&L for preparation and applying one coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, complete all as specified and as directed.

M&L for preparation and applying one coat of synthetic enamel paint over steel & iron surfaces of any description, not exceeding 10 cm in width or girth, unconnected with other painting or when painted in different tint complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and directed.

S&F in repair vitreous China wash basin, (white) Flat back, size 550x400 mm including cast iron brackets, PTMT waste coupling and PVC waste pipe complete all as specified and directed.

S&F in repair vitreous China Squatting pan, 'orrisa pattern, size 580x440 mm (white) with integral foot rests with and including 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair (centre hole mixer), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair Sink mixer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm dia bib taps CP brass,fancy type,long body, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm dia Angle cock chromium plated brass fancy type, screwed down , high pressure, scrwed both ends for iron pipe complete all as specified and directed.

S&F in repair cast iron Nahani trap(dia of outlet 75 mm), with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F Continuous (piano) SS hinges used in cupboards, 30 mm wide, complete all as specified and directed.

S&F in repair 100 mm SS Hasp and staple, safety type, hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 4mm sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

All as per item 32 here-in-before above but fixed in repair complete all as specified and directed.

S & F in repair 17-18mm thick HDHMR board, high density, water and termite, boer and fungus resistant, laminated both side fixed with screws to timber frame work as in cupboard shelves, shutters, bathroom doors, kitchen cabinets etc complete all as specified and directed.

S & F in repair 19mm thick pre-laminated particle board, interior grade pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/aluminium frame work complete.

S & F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed stainless steel wire staples complete all as specified and directed.

All as per item No 36 here-in-before but fixed in repair complete all as specified and directed.

Cutting chases in stone wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

M&L 15mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors complete all as specified and directed.

M&L 20mm dia GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors complete all as specified and directed.

Taking down steel water tubing 15mm to 20 mm with all fittings from walls, ceiling and floors, complete all as specified and directed.

S&F in repair 20-25mm mm dia curtain rod made of aluminium Pipe with decorative lining coating,including brackets and decorative balls / caps at both ends of rod with comp fittings complete all as specified and directed.

S&F in repair 20mm dia SS 304 curtain rod including brackets, decorative balls/caps on both ends of curtain rods with comp fittings complete all as specified and directed.

Supplying and laying CPVC pipes (SDR-11) of outer dia 20mm with and including CPVC SDR-11 fittings on walls and ceilings or laying in floors complete all as specified and as directed.

All as per item No 44 here-in-before but 25 mm dia complete all as specified and directed.

S&F in repair vitreous china (white) counter top wash basin in square / rectangular shape of standard size complete all as specified and directed. Make: Cat Part - Calburt MINI from CERA or equivalent as make specified in Appx 'B'.

S&F in repair vitreous china (white) counterin wash basin in oval shape of standard size complete all as specified and directed. Make: Cat Part - Calburt MINI from CERA or equivalent as make specified in Appx 'B'.

S&F in repair SS 304 cutlery trays of size 370x485x100mm and 0.6mm thickness 4 modular kitchen concept including fixing with slider, rollers for front and back movement complete all as specified and directed. Make: HAFALE/Hettich/Godrej/Harrison or equivalent as approved by GE.

S&F in repair SS 304 multipurpose tandem box drawer of size 850x500x200mm and 0.6mm thickness having space for deep and shallow storage for bottom cabinets including blum tandem runners fixing clips, Tandem runners cover cap, front fixing fascia bracket and mounting plate and all necessary fitting and fixture and Dtype cabinet handles premium quality gloss chrome/SN Finished 150mm long matt finished, front and back movement complete with and incl tray containers and utensils complete all as specified and directed. Make: HAFALE/Hettich/Godrej/Harrison or equivalent as approved by GE.

S&F ball catchers for cupboard and kitchen cabinets both male & female part (making each set) complete all as specified and directed.

S&F in repair 75mm size 4 lever brass chromium plated handle door lock for built in cupboard (mild steel shutters) complete all as specified and directed.

S&F as in repair mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose 125mm size,with complete fitting complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl fixing hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long for false ceiling with and incl 7mm thick laminated prepainted gypsum boards or tiles for insulation and accoustic purposes, 60cm x 60cm in size all as specified for size of grid 605 x 605mm complete all as specified and as directed.

Dismantiling timber scantling in fillets, rail, posts, rafter, purlins, etc under 40Sq.cm in section complete all as specified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 250 & n.exc 500 ltr in capacity complete all as specified.

Disconnecting existing water tanks , setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconneecting and refixing in position (Cleaning repairing etc measured separately) exc 500 & n.exc 1000 ltr in capacity complete all as specified.

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

Dismantling water tanks 1000 ltr /500 ltr complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc(exc 250 & nexc 500 ltr) complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc(exc 500 & nexc 1000 ltr) complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."

S&F in repair Chromium plated brass Jet spray with tube 1.5 mtr complete all as specified and directed.

S&F in repair Chromium plated brass 2 in 1 health faucet with hook 1mtr tube complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedastal pattern) white (exclusing fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F in repair Brass chromium plated Tubler towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F in repairs 15mm dia bore pipe Ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking down CI soil waste or vent pipe 100mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed.

Taking down CI soil waste or vent pipe 75mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed.

S & F 110mm PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 75mm PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F in repair 110MM PVC SWR Bends any radius complete all as specified and directed.

S & F in repair 75 MM PVC SWR Bends any radius complete all as specified and directed.

S & F in repair 75MM PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F Door strip (snake guard strip) minimum 18mm wide aluminium body and nylon brushes minimum 22mm wide alongwith screw fixing complete all as specified and directed.

Providing and fixing anodised aluminium work for door windows, ventilators, casement/sliding shutters and partitions with extruded built up standard tabular and other sections of approval make fixed with rawl plugs and screws or with fixing clips or with expansion hold fastner incl neceesary filling up of gaps at junctions at top bottom & sides with required PVC neoprene belt etc. Aluminium section shall be not less than 2mm thick, smooth rust free straight mitred and jointed mechanically where ever required including cleats angles, aluminium snap beading for glazing/panelling, CP brass/stainless steel screw incl providing hinges/pivot and making provision for fixing of fittings where ever required complete all as specified and directed. Note:- panel fillings other than aluminium filling and necessary fittings shall be measured and paid for seperately under respective items.

S&F 5.00mm thick glass corner shelf one piece having stainless steel perimeter border all as specified and as directed.

M & L Cement concrete type B -1, 1:2:4 type B-I (20mm graded stone aggregate) 25 mm thick, complete all as specified and directed.

M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) with old size bricks disignation 7.5 complete all as specified and directed.

Brick work with sub class 'B' bricks designation 7.5 half brick thick straight or curved on plan to any radius in half brick walls built in CM(1:4) complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L ceramic coloured tiles 8-9mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L coloured vitrified tiles (scratch and strain resistant tiles) 10mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L Glazed ceramic coloured,,tiles 450x350x6-7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick in CM (1:4) complete all as specified and directed.

M&L for 18- 20 mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.

Dismanntling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.

S & F 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

S & F 0.63mm galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, valleys, gutters etc. fixed with self tapping screws complete all as specified and as directed.

S & F Fe 410-w(Gde E 250)quality B rolled mild steel roof trusses (framed) trussed, purlins, crane gantries, rails and framing (beam, tee, angle, channel or flat sections) including distance pieaces cleats etc complete all as specified and directed.

Taking down Chowkhats or frames without taking off shutters from the frame not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames without taking off shutters exc 1.50Sqm but nexc 4.00Sqm complete all as specified and directed.

Taking down shutter of any description nexc 1.5 Sqm complete all as specified and directed.

Taking down shutter and refixing the same after easing & minor altearation in sizes area not exc 1.00 Sqm

Taking down shutter and refixing the same after easing & minor altearation in sizes area exc 1.00 Sqm but n exc 2.00Sqm each complete all as specified and as directed

S&F factory made solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specified.

S&F factory made solid panel PVC Door shutter 30mm thick (stiles)consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain cover PVC 'C' channel having PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails on either side & as gap insert for top rail & bottom rails, panelling of plain colour PVC sheet to be the fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S&F 100 mm Stainless steel, Butt hinges, e anodised and fixed, type C-21 complete all as specified and directed.

S&F 150 mm Stainless steel, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm size, Stainless Steel, D type with back plate, handle and fixed with screws complete all as specified.

S&F 250mm long stainless steel, sliding door bolt, plate type, s , with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.

M&L for preparation and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surface of any description ,not otherwise described complete all as specified and directed.

M & L 2nd class hard wood 35mm thick plain framed panelled shutter (min 2 panels) with lock rail and panel of 9mm BWP commercial ply on both faces. The size of rail and stile as per IS 1003(part I) complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

M&L for 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted built in retaining walls, abutment and sililar work complete all as specified and directed..

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted built in retaining walls, abutment and sililar work but except stone complete all as specified and directed.

Flush pointing to random rubble, uncoursed or brought up to coursed CM 1:4 complete all as specified and directed.

Demolition of brickwork or stone/boulder masonary, built in lime mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar complete all as specified and directed.

M&L providing for PCC 1:3:6 Type C-1 using 20mm aggrgate as in coping, apex stone, complete all as specified and directed.

M&L Cement concrete in surface channels and drains in cement concrete 1:3:6 type C1 (20 mm graded stone aggregate) complete all as specified and directed.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Demolitioin of cement conc in ground floors and pavings n.exc 15cms thickness (below or above GL).

Demolitioin of cement conc(reinforced) in ground floors and pavings n.exc 15cms thickness (below or above GL).

M & L 75 mm thick Cement concrete type D2,1:4:8 (40mm graded stone aggregate) as in sub base,path,floor, hardstanding complete as as specified and directed.

M&L for coloured cement concrete tiles with grey cement and pigment of size 20cmx20cmx25mm thick, set and jointed in neat cement slurry over 15mm thick screed bedding in CM 1:4 all as specified.

Machine pressed precast conctete coloured interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade and to be laid in any pattern complete all as specified and directed.

Machine pressed precast conctete coloured interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade and to be laid in any pattern complete all as specifiea and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Providing cement concrete Type B1 1:2:4 (20mm graded aggregate) kerbs or mut stops, rounded or chamfered on edges complete all as specified and directed.

S & F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S & F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F in repairs Kitchen Plate Rack (600x750x250mm) made of 0.63 mm thick stainless steel sheet to accommodate (8 plate) complete all as specified and directed.

S&F in repairs towel (600 mm long) rack stainless steel with peg set all as specified and as directed.

S&F in repairs waste pipe 32mm dia flexible for Sink and WHB all as specified and as directed.

S&F in repairs 10 ltr capacity PVC vlaveless syphonic action type flushing cistern low level,white with inlet ball valve,float and handle including brackets complete all as specified and directed.

Taking down aluminium shutters n.exc 1.00 Sqm and refixing in the same opening after easing, cleating, and all necessary adjustments complete all as specified and directed.

Taking down aluminium shutters exc 1.00 Sqm but n exc 2.00 sqm and refixing in the same opening after easing, cleating, and all necessary adjustments complete all as specified and directed.

S&F in repair double action floor spring, hydraulically regulated made up of aluminium 1.25mm thick aluminium alloy sheet , foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Excavation in trenches in hard dense soil n. exc 1.50 mtr wide and n.exc 1.50 mtr in depth for foundation for laying of pipes complete all as specified and as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm each layers complete all as specified and as directed

Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 mtr cumic metre above the starting point complete all as specified and as directed

Dismantling existing waterproofing treatment hessian cloth base, membrane or any type including removal of debris from the site and depositing where directed.

M & L for preparation and cleaning surfaces of cement concrete incl flashing and junction of parapets etc and applying APP based polymeric memberane min wt 3 Kg/Sqm and min 3 mm thick reinforced with non woven fabric with torch application over and including a coat of oil base bituminous primer and finally applying two coats of bitumenous aluminum paint @ 0.20 kg per sqm over APP membrane, complete all specified and directed.

Demolition of existing mud phuska , brick Koba waterproofing treatment, bringing it down carefully, removal of debris from the site and depositing where directed at a distance exc 1.00 Km but n exc 2.00Km complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for in any location and any position complete all as specified and directed.

M&L RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in slabs supported on walls, roofs, landings, shelves and the like complete all as specified and directed by Engineer-in-Charge

Formwork to soffits of suspended slabs such as roof slabs, floor slab, landings and similar work not exceeding 200mm thick, horizontal or sloping finished rough complete.

TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete.

M&L for Cleaning of Mild steel tank ( Stage II Pump House) of capacity 10000 gallons staged on more than 10 metre height staging after draining out the water from the tank including complete removal of silt, sludge, fungus, dirt deposited on the internal surfaces of tank by scrapping with wire brush and removing vegetation if any,incl removal of debris/sludge to a distance exc 250 mtrs but n.exc 500 mtrs, washing internal surfaces including ceiling with clean water mixed with bleaching powder twice in inner surface,day after applying two coats of synthetic enamel paint (colour will be decided by Engr-in-Charge) over one coat of red oxide zinc chrome primer of inner and oute side of the Mild steel OHT tank after complete removal of existing paint , corrosion etc including removing of existing unserviceable corroded steel angle section by applying two coats of synthetic enamel paint over a coat of red oxide complete inner and out side of the MS angle section etc including writing, cleaning date/due date for cleaning with white enamel paint on black colour surface complete all as specified and as directed by Engineer-in-charge.Note:- The replaced steel member will be measured and paid for separately in respective items.

M&L for Cleaning of RCC over head reservoir (Near Stage III filteration plant) of capacity 100000 gallons and 6 mtr depth staged on more than 18 metre height staging after draining out the water from the tank including complete removal of silt, sludge, fungus, dirt deposited on the internal surfaces of tank by scrapping with wire brush and removing vegetation if any,incl removal of debris/sludge to a distance exc 250 mtrs but n.exc 500 mtrs, washing internal surfaces including ceiling with clean water mixed with bleaching powder twice in inner surface, and applying two coats of cement base paint to internal surface including ceilings & wall complete etc including writing, cleaning date/due date for cleaning with white enamel paint on black colour surface including applying one coat of exterior emulsion weather proof paint over a coat of primer for complete outside of the over head tank and applying two coats of synthetic enamel paint (black) over one coat of red oxide zinc chrome primer including removing of existing unserviceable corroded stairs for complete steps ( MS angle section) incl S& F in replacement of Aviation obstruction light complete all as specified and as directed by Engineer-in-charge..Note:- The replaced steel member will be measured and paid for separately in respective items.

Dismantling and Taking out existing unserviceable MS Header and M & L for MS header of size 250 mm dia made out of MS pipe 250 mm dia heavy duty having a length of 8 to 9 mtr with 4 Nos flanged tee of size 250x250x150mm, including necessary welding work for fixing of existing water supply main line of size 150 mm dia, 3 Nos and 2 Nos 150 mm dia distribution lines on either side of the MS header using suitable size MS reducer including making good on disturbed surfaces by applying two coats of synthetic enamel paint over a coat of red oxide primer complete as directed by Engineer-in-Charge

Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed including M&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish with distempering brush for under- ground reservoir of capacity 30000 Gallons and 3.5 mtrs deep at Stage-II and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed by Engineer-in-Charge. Note : The rates are inclusive of mionor B/R repair of side wall/botom or top surface of tank and cleaning with bleaching powder as well,contractor also needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed.

Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed including M&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish with distempering brush for L shape under- ground filtration tank of capacity 10000 Gallons and 2.5 mtrs deep at Stage-II and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed by Engineer-in-Charge. Note : The rates are inclusive of mionor B/R repair of side wall/botom or top surface of tank and cleaning withbleaching powder as well,contractor also needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed.

Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed including M&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish with distempering brush for L shape under- ground reservoir of capacity 2x50000 Gallons and 3.5 mtrs deep at Stage-III and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed by Engineer-in-Charge. Note : The rates are inclusive of mionor B/R repair of side wall/botom or top surface of tank and cleaning withbleaching powder as well,contractor also needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed.

Excatation in river bed/bank or side of river to digging of boulder stone, earth with the help of earth moving maching like JCB for making a un lined channel having length exc 400 mtrs but not more than 500 meter, width equal to 2.0 mtr approx and depth should be 2.30 mtr including arranging stones/boulders in bunds fashions etc The slope of this channel should be from upstream river to towards MES pump house stage I at Markanda at times ,So that surface river water shall colected in RCC chamber, the work should be executed as per the direction of Engineer-in-Charge as and when required and should completed with in stipuated time limit (Not more than 12 hrs) in all respect. NOTE : The quoted rates are including of men, material, machinery and CP any other expenditure occured by contractor.

Dewatering / desilting including cleaning with wire brushes bottom & side wall of the extent surface is clearly visible etc removed incl M&L for one coat of thick cement wash with cement slurry @ 3kg/Sqm to achieve the finish with distempering for sedimentation tank of 8 metre x 7 metre x 6 metre including channels and painting of steel channels( Steel angle section) / other member with one coat of red oxide and two coat of black bitumenous paint (at Stage-II) including removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed Complete all as specified and as directed .

Cleaning of stage I, II & III including clearing of all debries, pipe scaling, plant tree leaves,trimming of branches over on LT line and other material from water supply installation and deposit beyond Mod land & Cleaning of above ground water tank.T&P will be provided by the contractor which is included in this quoted rate.

Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed including M&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish with distempering brush for under- ground reservoir of capacity 20000 Gallons at Stage-I and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed. Note :The rates are inclusive of mionor B/R repair of side wall/botom or top surface of tank and cleaning withbleaching powder as well,contractor also needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed.

S&F as in repair brass spindle, with spindle nuts brass ring, nuts gland packing and its suitable for connecting properly in base plate etc of existing sluice valves of 250/200 mm bore complete all as specified and as directed

All as per item No 158 of above but 150 mm bore sluice valve

All as per item No 158 of above but 100 mm bore sluice valve

All as per item No 158 of above but 80 mm bore sluice valve

Disconnecting and removing from existing foundation motor at Stage -I,100 HP, 3 phase, 50 Hz including pump set from site to work shop and vice versa opening the motor, cutting and removing the burnt winding and cleaning of slots and rewinding with the super enamel copper wire (as per existing no of turns) with suitable size including replacement of terminal plate connecting and refixing at existing foundation including testing complete after repair all as specified and directed .Note:- The cost of loading, unloading including transportation for carrying of this item from Pump House to workshop and back shall to be included in the unit rate of this item.

All as per Item No. 162 above but Submersible pumping set(Stage-I & II)/Monobloc Pumping set (Swimming Pool) of capacity 5 to 15 HP.

Taking up or down old unserviceable corroded existing 20/25 mm bore steel water tubing & connections including all fittings and fixtures, laid in trenches or fixed along the walls or in any position, complete all as specified and as directed .

All as per item No 164 here-in-before but 40 mm bore.

All as per item No 164 here-in-before but 50 mm bore.

All as per item No 164 here-in-before but 80 mm bore.

All as per item No 164 here-in-before but 100 mm bore.

All as per item No 164 here-in-before but 150 mm bore.

Supply, laying, connecting & testing of 20/25 mm bore steel water tubing galvanized medium grade, with all fittings & fixtures (ISI marked) laid in trenches or fixed along walls or in any position complete all as specified and as directed .

All as per item No 170 but bore 40 mm.

All as per item No 170 but bore 50 mm.

All as per item No 170 but bore 80 mm

All as per item No 170 but bore 100 mm

Supply, laying, jointing and testing of MS ERW pipe line medium grade 150 mm dia (ISI marked) both end flanged with and including MS flange 20 to 25 mm thick consisiting 12 holes with 12 Nos bolts and nuts, washer and compressed fiber board 3 mm thick rubber sheet and all MS fitings including taking out existing unserviceble pipe line with burning out joints and recovering lead complete all as specified and as directed . Note for item No 170 to 175 :- Excavation and earth work shall be measured and paid seperately under respective item of this schedule.

M&L for jointing and testing CI fiting such as bend any type, any radius and angle, tapers any type (straight, bends for pieces increasing/decreasing or double socket, dead flange any size etc) tee pieces, single branch Y junction, double branch, cross, collars,caps and plugs upto 150mm bore pipe with spigot and socket ends Incl lead joints complete all as spcified and directed. (Note: Excavation & earth work shall be measured and paid separately)

Supply, fixing & testing sluice valve PN-1 (ISI marked ) confirming to IS-14846-2000 with brass spindle, and fly nut flanged both ends & drilled for jointing, wheel head type including two flanged joints with nuts, bolts, washers & rubber insertion packing etc for 250/200 mm bore pipe as in repair complete including taking out unserviceable sluice valve 250/200 mm bore from pipeline and removing from site complete all as specified and directed .

All as per item No. 177 above but 150 mm bore

All as per item No. 177 above but 100 mm bore

All as per item No. 177 above but 80 mm bore

Dismantling opening and overhauling of pump set multi stage capacity 10000 GPH at Stage -II, head 600/1200 feet from site to workshop including repair/replacement of parts listed below reassembling the pump commissioning and testing after repairs including necessary welding work, gasket, packing, nuts bolts and washers atc complete all as dpecified and directed:- (a) Neck bush GM - 06 Nos, (b) Impeller GM - 05 Nos (c) Neck ring GM - 04 Nos (d) Diffuser CI - 03 Nos (e) Shaft Key - 06 Nos (f) Shaft Sleeve - 02 Nos (g) Balancing Disk SS - 02 Nos (h) balancing bush,bearing and packing glands as per existing size including disconnecting and removing from existing foundation of pumping set 100 HP,3 phase,50 Hz incl mortar at stage-I and refixing at existing foundation incl testing complete after repair. Note:The cost of loading, unloading including transportation for carrying of this item from site to workshop and back shall to be included in the unit rate of this item.

S & F in replacement of 150 mm dia bore MS foot valve MS flanged as per IS code standard internals leather/rubber washer,bolt including necessary gasket complete all as specified and directed.

All as per item ser No 182 but of size 100mm dia bore

M&L for Brick masonry valve pit of size 90cm x 90 cm x 105cm internal dimension of chamber including plastering internally and flush pointing externally in cement mortar 1:4 complete with MS sheet cover 3 mm thick with handle and locking arrangement over and including 40 x 40 x 6mm thick angle iron frame including earth work and applying two coats of synthetic enamel paint over a coat of red oxide primer complete in and outer side of the MS sheet cover and angle iron frame complete all specified and as directed.

All as per ser No 184 above but of size 105 x 105 x 110 cm.

M&L for jointing of 150mm bore MS flanged pipes with 25mm thick (as in repair) M.S flange having 8 to 12 holes and including 3mm thick rubber gasket (packing) incluing provision of suitable size of Nuts bolts and double washer for each point and necessary welding work to arrest water leakage complete all as specified and as directed

Material and labour for rewinding the coil of voltage regulator fixed in 125 KVA Diesel Gen set Make : Kriloskar by providing super varnished proper Copper winding wire with hylem insulation suitable for existing gauge inluding old insulated accessories complete incl testing after fixed the existing location Gen set all as directed.

M & L for calibration of relay by replacing unserviceable contactors of existing make and size fixed in starter panel for 100 HP Monoblock pumpset including testing and connection by authorised service engineers incl replacement of all burnt wiring, connectors etc complete all as specified and as directed.

Supply & fixing in replacement of Busbar chamber comprising of 3 copper strips 400 Amp & one copper strip of cap 200 Amps and minimum length 460mm long enclosed in sheet metal enclosure including all the fixing arrangements, making all incoming and out going connections through the lugs/thimbles all as specified and directed.Make:Havell's Cat No: IHBB040004)/Siemens/ Indo Asian.

Taking out unserviceable Air release valve of 50 mm bore with all fitting and S&F air release valve of size 50 mm complete with air outlets fixed with nuts bolts and packing material for CI/MS water mains of 50 mm bore flanged pipe complete all as specified and as directed

Taking out unserviceable Air release valve of 100 mm bore with all fitting and S&F air release valve of size 100 mm complete with air outlets fixed with nuts bolts and packing material for CI/MS water mains of 100 mm bore flanged pipe complete all as specified and as directed

All as per Sl Item No. 191 but 80mm bore

S & F gun metal gate or globe valves heavy duty yoke type, full way openig with iron wheel head screwed with both end of GI tubing 50 mm bore ISI marked including taking down of unserviceable gate or globe valve all as specified and directed.

All as per Sl Item No. 193 but tubing 40 mm bore

All as per Sl Item No. 193 but tubing 25 mm bore

All as per Sl Item No. 193 but tubing 20 mm bore

All as per Sl Item No. 193 but tubing 15 mm bore

S & F as in repair cast steel body reflux valve (non return valve) with by pass arrangement having dia 150 mm heavy duty class 300 all as specified in repair.

Dismantling and Taking down unserviceable sleeve and M & L for new Stainless steel sleeve suitable for 100 HP Pumpset including all necessary fixing accessories complete all as specified and directed

M & L for Packing Glands of size 19 mm complete all as specifed and directed

M & L for Packing Glands of size 12 mm complete all as specifed and directed

M & L for Packing Glands of size 10 mm complete all as specifed and directed

M & L for Packing leather sheet 4 mm thick complete all as specifed and directed

M & L for lose rubber bag suitable for Avon bleaching powder dozer 110 ltrs cap complete all as specified and directed by Engr-in-Charge

M&L for coupling bush suitable for 100 HP Centrifugal pump/Squirrel cage motor complete all as specified and directed.

M& L in replacement of clamps, nuts,bolts and washers as per site requirement for connection of CI/MS pipe of size upto 150 mm bore complete all as directed.

M&L for existing old painted surface upto 250mm of MS/GI pipe of suction,delivery,Sluice valve,Non return valve, header ,flange ,channels, angle incl 100 HP centrifugal /squirrel cage induction motor with pump etc by brooming down with steel wire brushing .scraping down the corroded MS/GI pipe and applying new painting as per existing colour with written a letter suction,delivery line incl direction of flow (arrow mark) with two coat of synthetic enamel paint over a coat of red oxide for Stage-I & II complete all as directed.

Taking out/relaying the pipe line of size 40 to 150 mm dia bore from trenches, wall , suface for repair and rectify the leakage from pipe line including necessary T&P for cutting/threading welding of pipe line in any situation for making leakage proof all as directed Note - (i) Excavation earth work measured and paid separately (ii) Fittings for repair such as elbow,union, tee, nipple,flange,Gasket ,nuts,bolt etc included in this quoted rate (iii) Welding machine,welding rods,DG Set and manpower required for this job is included in quoted rate (iv) The repair work carried out all as per direction of Engr-In- Charge

Material and Labour for collecting water sample from Stage II Pump House , packing it safely in sterlized bottles as required quantity and send it to approved govt laboratory test lab or other approved labs for testing of portable water/raw water as per IS10500 with following parameters colour,odour,turbidity,conductivity,TDS,PH,alkalinity,hardness,calcium,magnessium,iron,manganese,ammonia,nitrate,nitrite,chloride,fluoride,sulphite,phosphate,silica,free chlorine and special element tests all directed by Engr -In- Charge .Note: Tpt for this item is included in this quoted rate.No extra payment will be made for it.

Supply and fix chlorine granule dozing system (Model ADS-I including 100 Ltrs PE/FRP tank with epoxy lid & level indicator mounted on tank ) provision of O ring for water/altoch feeding including necessary connection arrangement to dozing pump complete with agitator motor 90 watts 230 volts 50 Hz 0.2 Amps class 'B' insulation including shaft & blade in SS 316(FRP) epoxy coated the out let of the pump directly connected with delivery line and speed control regulator for agitator motor complete including taking down unserviceable motor/solution tank all as directed

Supply and replacing Rubber Star Coupling suitable for up to 100 HP Pumpset , including taking down of existing couplers complete all as directed.

Material and labour for cement concrete in foundations or pipe support or coping or any other work type B2 1:2:4 with 40 mm graded crushed stone aggregate all as directed

Supply and fix voltmeter digital type 0- 500 volts including taking down unserviceable volt meter all as directed.

Supply and fix Ammeter digital type 0- 200 Amps with necessary CTs 3 nos of range 100/5 including taking down unserviceable Ammeter all as directed

Material & Labour in replacement of transformer oil as per existing grade for star delta starter complete all as directed.

Disconnecting and removing from existing foundation of squirrel cage induction motor 100 HP,2800 RPM,3 phase,50 Hz incl pump set at stage-II,opening the motor,cutting and removing the burnt winding and cleaning of slots and rewinding with super enamelled copper wire as per existing Nos of turns with suitable size incl replacement of terminal plates connecting,rotating starter winding,steel lamination bearing shaft etc. as per existing of this one and refixing at existing foundation all as directed. Note: Loading/unloading incl transportation for carrying of this item from installation to workshop and back is included in this quoted rate.

S&F in replacement of water pressure gauge upto pressure 1000kg/cm3 for measuring water pressure complete all as specified and directed.

S & F in replacement of 100/150 mm dia bore PVC foot valve with flanged as per IS code standard internals leather/rubber washer,bolt including necessary gasket complete all as specified and directed.

M & L in replacement of Smart i ipro Metal Water level indicator with alarm on tank full with 5 sensor of size 16x7x5cm , inbuilt mechanism to detect/indicate the water level show the percentage 25%,50%,75% and full of Over head tank complete all as specified and directed.

Supply and fixing in replacement of Magnetic pickup unit of 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of Hose Rubber: Engine to Radiator for 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of Hose Rubber: Radiator to Engine for 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of Clamp Hose Bend Type for 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of Seal Oil (Front) for 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of Stop Solenoid 3R unit suitable for 15 KVA to 125 KVA as prescribed by the manufacturer.

Supply and fixing in replacement of water separator with complete assembly for 15 KVA to 125KVA complete all as specified and directed.

Supply and fixing in replacement of fuel pipe for tank to filter with necessary fixing arrangement complete all as specified and directed.

Supply and fixing in replacement of Lubrication oil pressor sensor suitable for 15 KVA to 125 KVA DG Sets all as specified and directed.

Supply and fixing in replacement of battery 12 volt,80AH (Heavy Duty maintenance free) complete all as specified and as directed.

Supply and fixing in replacement of battery 12 volt,180AH (Heavy Duty maintenance free) complete all as specified and as directed.

Supply & Replacment of Kirloskar Oil of grade 15W - 40 or as specified by manufacturer for topping up or replacement of lubricating oils during different checks complete all as specified and as directed.

Supply, Install, jointing, connecting and testing complete Automatic Star-Delta starter suitable for 100 HP , 110 KW, 415 Volts in stainless steel housing IP 54 protection class with built in relays suitable for 100 HP pump set including dismantling/taking out unserviceable existing starters complete all as specified and directed. Make :- Siemens or equivalant in L & T, ABB

Opening of Alternator and separte the stator, rotor assambly of 125 KVA DG Set and taking down burnt winding from stator, exciter field and rewinding of stator with dual coated supper enameld copper conductor of existing gauge with 'H' class insulation coating including replacement of fibre glass (H71A) tape, sleeves, slot wedges, terminal lead etc and varnishing of complete winding with 'H' Class insulating level varnish and babofill resin ,drying the varnish by backing process and reassemble the alternator complete all as directed. Make of Varnish - Dr Beck or equivalent of 'H' class insulation

Meterial and labour for rewinding of exciter rotor with dual coated supper enameld copper conductor of existing gauge including replacement of fibre glass tape sleeves etc and varnishing of complete winding with 'H' Class insulating level varnish and babofill resin ,drying the varnish by backing process all as directed.

Meterial and labour for taking down the rotor bearing of the alternator by puller and supply fix new bearing of existing size all as directed Make - NBC,SKF or equivalent as approved by GE.

Meterial and labour for taking down the unserviceable diode from exciter and fixing of new diode as per existing rating complete all as directed

Meterial, T&P and labour for loading, unloading of alternator ,transportation from site to workshop and Workshop to site for rewinding of alternator all as directed

Material and labour for cleaning of rotor pole coils, varnishing the coil including removing the corbon particles from rotor and greasing the main bearing of rotor assembly complete all as directed.

Bairagi Builders