REPAIR TO ROOF GI PIPES AND OTHER MISC WORKS TO MD ACCN AT PALAMPUR

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.

Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.m each, complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring,paver block and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets etc. complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding or backing coat, removing rubbish off the premises, removal and depositing where directed and leaving the work clear of any plastering complete all as specified and directed .

M&L 25 mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) 25mm thick as in sub base of flooring, leveling course of flooring or levelling course of roof etc, complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L joint free coloured glazed ceramic tiles in vertical surfaces350x450x7mm,450 x 300x 7mm/ 600 x 300 x 7mm as in skirting/dado etc, over and including 10mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L rendering 15mm thick plaster on stone masonry or other than fair faces of brick wall in cement mortar 1:4 finished even and fair without using extra cement, complete all as specified and directed. (building height up 15.00 m height)

Peparation of new plastered or unplastered surfaces of walls and applying two coats of weather proof exterior emulsion paint (Apex of Asian paint) of approved tinted, over a coat of primer (JK cement primer or equivalent) complete all as specified and directed. (building height up 15.00 m height)

Preparation old wall surface bycomplete removing existing treatment of walls,filling creaks etc by crack filler or grout and applying two coats of weather proof exterior emulsion paint (Apex of Asian paint) of approved tinted complete all as specified and directed. (building height up 15.00 m height)

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed. (truss etc)

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Grade E-250) complete all as specified and directed.

Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Repairs the grooves 10 mm wide and 10 mm deep and filling with expocy resin filler with standard filler gun or any other way with Crack X- Paste (Dr. Fixit)/ Crack seal (Asain paint), complete all as specified and directed.

Dismantling old plain or corrugated rusted steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified.

S&F 0.65mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts and washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed.

Fixing only 0.65mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts and washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 0.80mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Fixing only 0.80mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc. complete all as specified and directed.

S&F aluminium anodised snap grid frame works 605mm x 605mm as in ceiling all as specified including hanging 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made of out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long completed all as specified including provision of 8mm thick weather proof calcium silicate board of silicieous and calcareous material reinforced with cellulose fibre for fixing to grid, ISI marked, as per manufacturer's instructions, complete all as specified and directed.

Fixing only old aluminium anodised snap grid frame works 605mm x 605mm as in ceiling all as specified including hanging 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made of out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long completed all as specified including provision of 8mm thick weather proof calcium silicate board of silicieous and calcareous material reinforced with cellulose fibre for fixing to grid, ISI marked, as per manufacturer's instructions, complete all as specified and directed. Note : Item obtain from dismentaling used in this item.

M&L 12mm thick Prelaminated particle board, exterior grade, prelmainated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work like cup board shutters etc complete all as specified.

M&L roof tiles, Mangalore pattern, interlocking at side joints, laid over 15 mm thick screed bed in cement mortar 1:4 and including taking down existing roof tiles, complete all as specified and directed

Dismantling old unserviceable water tanks of any type (with fittings like inlet,outlet,over flow nipple, ball valve) capacity exc. 250 and n. exc. 500 ltr capacity and removing from site, complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Dismantling old unserviceable water tanks of any type (with fittings like inlet,outlet,over flow nipple, ball valve) capacity exc. 500 and n. exc 1000 ltrs capacity and removing from site, complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

M&L cleaning and removing all scale and dirt,etc from tanks and mouths of circulating pipes etc, from existing water tank capacity exc. 500 & n. exc. 1000 litrs, complete all as specified.

S&F in repairs 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms), complete all as specified.

S&F in repairs vitreous china squatting pan, 'orissa' pattern, size 580 x 440 mm white , with integral foot rests (excluding flushing cistern and flushing pipe), including connection to trap and to flushing pipe, anti-syphonage pipe, etc, complete including making good to floor.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type flushing cistern,low level,with inlet ball valve, float and handle including brackets and fixing 32mm dia PVC flushing pipe and 15mm size, 450mm long PVC connection with PTMT nuts complete all as specified and directed.

S&F Flush pipe of polyethylenevof low or high density or PVC.32 mm dia,for low level cistern complete all as specified and directed.

S&F in repairs,Flush pipe of polyethylenevof low or high density or PVC.32 mm dia,for low level cistern complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed. Note:- Taking down fittings connected tubing included in this item.

Taking up or down 20mm bore steel water tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed. Note:- Taking down fittings connected tubing included in this item.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors (concealed tubing) complete all as specified and directed. Note:- The cost for cutting chases in walls, floors, etc and their making good for concealed pipe work included in this item.

S&F for steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed

Fixing only old steel water tubing obtained from taking down, 15mm bore, galvanised, "medium grade" with all new fittings, fixed to wall and ceiling or laid in floor, complete all as specifedand directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors (concealed tubing) complete all as specified and directed. Note:- The cost for cutting chases in walls, floors, etc and their making good for concealed pipe work included in this item .

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Fixing only old GI tubing obtained from taking down 20mm bore medium grade with all new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair 15 mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. (Minimum weight-142gms)

Taking up or down 75 mm bore cast iron soil,waste and vent pipes with fittings laid in trenches or fixed to wall including cleaning for refixing or removal from site, complete all as specified and directed.

S&F 75mm bore cast iron soil , waste and vent pipes (Spun pipes),, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore cast iron soil , waste and vent pipes (spun pipe), in any length with or without ears, with cement joints, fixed to wall, complete all as specified

Fixing only old cast iron pipe obtained from taking down, 75mm bore cast iron soil , waste and vent pipes (spun pipe or sand cast pipe), in any length with or without ears, with cement joints, fixed to wall, complete all as specified

Taking up or down 100 mm bore cast iron soil,waste and vent pipes with fittings laid in trenches or fixed to wall including cleaning for refixing or removal from site, complete all as specified and directed.

S&F 100 mm bore cast iron soil , waste and vent pipes (Spun pipes),, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 100 mm bore cast iron soil , waste and vent pipes (spun pipe), in any length with or without ears, with cement joints, fixed to wall with stack clamps, complete all as specified and directed.

Fixing only old cast iron pipe obtained from taking down, 100 mm bore cast iron soil , waste and vent pipes (spun pipe or sand cast pipe), in any length with or without ears, with cement joints, fixed to wall with stack clamps, complete all as specified and directed.

S&F 75mm bore of pipe cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with ovel access doors, complete all as specified and directed.

S&F 100mm bore of pipe cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with ovel access doors, complete all as specified and directed.

S&F 75mm bore of pipe cast iron sockets (double), collars, complete all as specified and directed.

S&F 100mm bore of pipe cast iron sockets (double), collars, complete all as specified and directed.

Taking up or down old 75 mm bore PVC waste and vent pipes with fittings laid in trenches or fixed to wall including cleaning for refixing or removal from site, complete all as specified and directed.

Taking up or down old 110 mm bore PVC waste and vent pipes with fittings laid in trenches or fixed to wall including cleaning for refixing or removal from site, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with stack clamps,complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tenches or in floors, complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction, (single T) equal or unequal ,complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap with grating including jointing with solvent cement, complete all as specified.

S&F 75mm bore PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore, PVC (SWR) junction, (single T) equal or unequal complete all as specified.

S&F 110mm bore of pipe PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to wall with clamps complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends complete all as specified and directed.

S&F 110mm bore PVC (SWR) floor trap with grating including jointing with solvent cement, complete all as specified.

S&F stack clamps suitable for 75 mm bore pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of staysto wall or roof complete all as specified and directed.

S&F stack clamps suitable for 100 mm bore pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of staysto wall or roof complete all as specified and directed.

Taking up or down 20 mm bore PVC tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed. Note:- Taking down fittings connected tubing included in this item.

S&F 20 mm unplasticised PVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

Taking up or down 25 mm bore PVC tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed. Note:- Taking down fittings connected tubing included in this item.

S&F 25mm unplasticised PVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality, exceeding 0.50 square metre in each pane including solar control film 25 micron reflective type (gareware sun control or equivalent) sticked to glass panes complete all as specified and directed.

S&F Powder coated Anodised aluminium door shutters (minmium thickness of powder coating 50 micron), aluminium section of bottom rail 114.50x44.45mm, middle and top rail 85x44.45mm, style 85x44.45 mm and thickness of section not less than 1.80mm , weight of glazing clip not less than 0.124 Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing two number of alumium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21,100mm long,anodised aluminium snap beading,screws,anodised aluminium fittings complete all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters (minmium thickness of powder coating 50 micron), weight of aluminium section not less than 0.914 kg/m for style and rail, weight of glazing clip not less than 0.124 Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing,anodised aluminium snap beading,screws,anodised aluminium fittings such as peg stays one number,hinges type B-21, 100 mm long two numbers,suitable handle one number on each shutter complete all as specified and directed.

S&F brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed.

S&F in repair brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F aluminium (extruded section body) door coser hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F in repair aluminium (extruded section body) door coser hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

M&L complete removal of roof treatment including APP membrane, PCC padding, plastering,brick bat etc coplete, complete all as specified and directed.

M&L preparing the surface of roof slab by brushing with wire brashes for removal of loose materials etc and sweeping with brooms, gunny bags and finally remove dust by compressed air by compressor complete, complete all as specified and directed.

M&L applying neat cement slurry with 3Kg of cement slurry per sq.m mixed with liquid water proofing compound on surfaces of roof and platering 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instructions and finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L one coat of cold bituminous primer to the plastered surface @ 0.30 litres per sqm conforming IS-3384 and laid a layer of APP polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weight not lass than 150gm/sqm) by toarch application method complete all as per manufacturer instructions and sealing all the over lap shall be minimum 75mm in length side and 100mm on with side. complete all as specified and as directed.

M&L 40mm thick plain cement concrete, M-15 (Nominal Mix), type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregates) as in roof kerbs, mud stops, roof padding over APP etc using water proofing compound, complete all as specified and directed. Note: WPC shall be measured and paid seperately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) 25mm thick as in roof padding over APP membrane even and fair without using extra cement complete all as specified and directed.

M&L 300x300x10 mm endura cool roof SRI tiles (light shade as approved by GE) fixed with spacers over 3 mm thick high polymer modified gray cement based tiles adhesive and grouted with epoxy grout complete all as specified and directed.(SRI value greater than 78)

M&L plain cement concerete 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in sunken area complete all as specified and directed.

M&L plain cement concerete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in roof kerbs, mud stops, rounded or chamfered on edges, complete all as specified and directed.

ranbir singh and Co Govt Contractor and Transporter