DEVELOPMENT AND ENVIRONMENTAL IMPROVEMENT OF NAYA TALAB, JODHPUR

Amount

Supplying & commissioning of ornamental pole with Single arm designer brocket of total pole height 8000mm nominal above the foundation top level with main shaft made of M.S. pipe of bottom 1500mm height 139.4mm dia B class & top 5500mm length 89 mm dia B class & base made of cast iron. The pole shall be fabricated with designer SG unbreakable iron base of grade 500h cast iron rings, M.S. Bracket with cast iron ring fixed on main shaft. The pole shall have window opening with weather proof flush door & lacking arrangement for housing at bottom the pole to accommodate electrical accessories. The pole shall be painted with polyure thane paint of opposed colour finish. Size of the C.C. foundation was not less than 450mmx450mmx1500mm and foundation bolt shall be made from M.S. steel 20mm dia 750mm long. 8 mtr make Bajaj/Surya/K.lite/Philips/Schreder/Keselec.

Supplying of 120W LED suspension type decorative street light fitting, made of spun aluminium housing, polycarbonate diffuser protector with IP 65 protection for optical compartment with high power LED'S & inbuilt driver with efficiency > 0.85 and having surge protection device, color temperature 5700 K.Bajaj Make: BORAGE 120W LED.

Fountain structure made of SS 304 grade 2'' or 2.5'' dia with 3mm min. wall thickness SS pipe industrial grade with manifold, stands for structure and clips of lights etc. Make OASE, Fountana fountains, Premier, Jet fountains.

Bras chromium plated nozzles Make OASE, Fountana fountains, Premier, Jet fountains.

Supply of stainless steel mesh filter for pump Make OASE, Fountana fountains, Premier, Jet fountains.

S&F of IP 68 protected LED Under water light system with aluminium dia cast or SS housing 9 x 1W, 12V DC LED lamps or 96 x 0.1 W, 18V DC LED lamps with dynamic color changing capability available in quick connecting cable coupled with various counting accessories. Ability to create 16.7 million uniform, smooth and brilliant colors with our revealing any lamp image, Available in 5 color - amber, green, red, blue, white and RGB multi Colour changing. Make OASE, Fountana fountains, Premier, Jet fountains.

SMPS supply for LED lights Make OASE, Fountana fountains, Premier, Jet fountains.

Colour changing controller for LED lights Make OASE, Fountana fountains, Premier, Jet fountains.

Electrical panel for fountain with VFD starter, PLC / Micro Controller, MCB and other switch gears at Judicial Academy Jodhpur. Make OASE, Fountana fountains, Premier, Jet fountains.

SKY WALKER • DIMENSIONS: - 1720mm (Length) x 630mm (Width) x 1750mm.(Height) • SAFE AREA: - 2.7Mtr x 1.6Mtr. • SkyWalker Equipment made from "C" class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame pipe is of 80mm NB made from "C" Class G.I. Material which is bend at the radius of 250mm. • The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. • Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, pins and handle. • The handle frame is of 25mm NB made from "C" Class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class. Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Two foundations are provided for rigid support. • The footrests made from Aluminum casting material of size 130 X 310 X Smm. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • The pins used are made up of 0 25mm SAE8620 bright material. Pins are fixed at the outer end with M8 grub screws and Dia.8mm SS ball. • The bearings used are "6205zz" are permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for assembly are of A24 type. • The powder coating is done with Pure Polyester powder of Ackzo n o bl e or Berger with 60 to 70 micron thickness.

LEG PRESS • DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height). • SAFE AREA:- 2.8 x 1.4Mtr. • Leg Press equipment made from "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100mm NB made from "C" Class G.I. pipe. • The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. • The bottom support of M.S. round plate of 0250 mm & 10mm thick. • The remaining outer frame is of 32NB made from "C" class G.I. pipe. • The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB "C" class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. • Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. • The footrests are made from tasted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate. • The frame of footrests made up of 25 NB "C" class G.I. pipe. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • To build structure bushes are used which are made from M . S . seamless pipe of 50mm O.D. and 5mm thickness. • The pins used are made up of 025 mm SAE 8620 bright material. • The bearings used are of "6205zz" permanent lubricated sealed bearing of reputed Brand. • High tensile steel with galvanized nut bolts are used for assembly. • The cerclips used for assembly are of A24 mm. • The powder coating done with Pure Polyester powder of Ackzo n o b le or Berger with 60 to 70 micron thickness.

ROWER • DIMENSIONS: - 1200mm (Length) x 1000mm (Width) x 920mm. (Height) • SAFE AREA: - 1.5Mtr. x 1.5Mtr. • Rower Equipment made from "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Main frame is of 80NB "C" class G.L. Pipe welded with M.S. round plate of 250mmX1Omm. • The handle frame 2 5 N B is made from "C" class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • To join the movement frame to main frame connecting links made up from 32 NB G.1. "C" class pipe. • The seat fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Pins used of Diameter 17mm are made up from SAE 8620 bright material. • The bearings used are of "6203zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts and bolts are used for assembly. • The P.U. bushes (Stopper) used to avoid the collision. • The circlips used for assembly is of A 16 • The powder coating done with Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

CROSS TRAINER • DIMENSIONS: - 1320mm (Length) x 600mm (Width) x 1750mm. (Height). • SAFE AREA: - 1.77 x 1.2Mtr. • Cross trainer equipment made from "C" Class G.I. Pipe of different N B. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The main frame Pipes are of 80NB "C" Class G.I. Pipe with single bend pipe with 250mm radius. • The bottom support of M.S. round plate of 0250 mm & 10mm thick. • The Handle Frame is made up of 25NB "C" Class G.I. Pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • To build structure bushes are used which are made from M . S . seamless pipe of 60mm OD. With 5 mm thickness. • The footrests a r e made from Aluminum casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick • Closing Caps are made up of high quality Fiber reinforced Plastic material. • Pins used o f Diameter 35mm, 25mm, and 17mm are made up from SAE 8620 bright . • T h e Bearings used are of "6007zz" "6205zz" and "6203zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts and bolts are used for assembly. • T h e powder coating is done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 Micron thickness. • A16 , A 24 mm circlips are used for assembly. • Bolt M8X16 mm and NY lock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.

SIT UP BOARD DOUBLE • PRODUCT DIMENSIONS: - 1760mm (Length) x 1140mm (Width) x 660mm (Height). • SAFE WORKOUT AREA: - 2500mm (Length) x 1600mm (Width). • The Sit up Board double made from "C" Class GI pipe. Center column made from 100mm NB "C" class G.I. Pipe. • The main frame is of 25mm NB made from "C" Class GI pipe. FRP sheet of 3mm thickness is molded on main frame. • The remaining frame of the sit up board is of 32mm NB made from "C" class GI pipe. • The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.

SEATING & STANDING TWISTER • DIMENSIONS: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height). • SAFE AREA: - 3 Mtr x 1Mtr. • Seating &Standing Twister equipment made from "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Center Pipe is of 100mm NB made from "C" Class G.I. Round Pipe. • The M.S. round plate of 0250 mm & 10mm thickness is welded at bottom. • Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. • The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB made from "C" class G.I. pipe. • The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from "C" class G.I. pipe of 25mm NB. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class, Welded with M.S. round plate of 0250 mm& 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRCA square pipes of 3mm thickness. • The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 300mm diameter and 10mm thickness. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • The Pins used are made up of 0 35 mm SAE 8620 bright material. • The bearings used are of "6205zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.

Seated Puller • DIMENSIONS: - 1900mm (Length) x 740mm (Width) x 1920mm. (Height). • SAFE AREA:- 1.2Mtr x 3Mtr • Seated puller equipment made up of "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100NB made from "C" Class G.I. pipe. • Bottom support i s of M.S. round plate of 0 250 mm & 10mm thickness is welded. • All linkages are made up of 25NB "C" class G.I. pipe. • The handle frame is of 32NB "C" class G.I. pipe. • The seat frame is of 32NB "C" class G.I. pipe, • To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class. Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness. • The seats and Back rests are fitted on the outer frames a r e made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. • The bearings used are of " 6205zz" and "6203zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for assembly are of A16 • The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness.

CHEST PRESS CUM SEATED PULLER • DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height). • SAFE AREA: - 3.0 Mtr x 1.7Mtr. • Chest press cum seated puller equipment made up of "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100NB made up of "C" Class G.I. pipe. • The bottom welded with support of M.S. round plate of 0250 mm & 10mm thickness. • The connecting pipes are made up from 25NB "C" class G.I. pipe. • The handle frame is made up from 32NB "C" class G.I. pipe. • To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. • The bearings used are of "6205zz" &"6203zz" permanent lubricated sealed bearing of reputed brand • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for locking is made up of A24 & A16 • The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

THI-CHI SPINNER (2 WHEEL) • DIMENSIONS: - 700mm (Length) x 1000mm (Width) x 1280mm (Height). • Safe Area:- 1.9Mtr X 1.9Mtr • Thai chi spinner Equipment made up of "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. • The center pipe is of 100NB made up of "C" Class G.I. pipe. • The handle movement round frame is made up from 25 NB "C" class G.I. pipe • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "C" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • The pins used are made up of 0 25 mm of SAE8620 bright material. • The bearing used is "6201zz" &"6205zz" permanent lubricated sealed bearing of reputed brand. • High tensile S. S. nut bolts are used for assembly. • Foundation cover Closing Cap is made from FRP Material with 0.7 mm thickness. • The cerclips used for assembly is of A24 and All. • The nylon bush is used for handle knob. • The powder coating done with pure Polyester powders from Ac kzo n o b I e or Berger Paints with 60 to 70 micron thickness. • Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.

SURFING BOARD • DIMENSIONS: - 1000mm (Length) x 600mm (Width) x 1400mm.(Height). • Safe Area:-1.5 x 1.3Mtr. • Surfing Board Equipment made from "C" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • T h e main frame is of 80mm NB made from "C" class G.I. pipe. • The bottom support welded of M.S. plate of 0 250 mm & 10mm thickness. • The handle frame is of 25N B made from "C" class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB "C" class welded with M.S. round plate of 0250 mm & 10rnm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Bushes are used 70mm Outer Diameter with 5mm thickness is used. • The footrests made from high quality fiber reinforced plastic. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • T h e pins used are made up of 035 mm SAE 8620 bright material. • The bearing used are of "6007zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nut bolts are used for assembly. • T h e cerclips used for assembly is of A34. • The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with minimum 60 to 70 micron thickness

Supply & Fixing of Combination Set (Deck 2.1 Mtr. Ht. Ladder 2.1 Mtr Ht. Split Level Ladder 0.6 Mtr. Ht. Plain Bridge 1.8 Mtr. Length, Wave Slide 1.5 Mtr. Ht., Tube Slide 1.5 Mtr. Ht. Economy slide 2.1 Mtr. Ht. Horizontal Loop Rug Laddr) All Welded joint are well grinded filled with epoxy sealent and chemically cleaned before painting, all parts done one coat of red oxide to avoid rusting & one coat of spray painted in multi colour for dazzling look with fixed in ground with cement concrete mix (1:1.5:3) size 30x30x45 cm including excavation of earth as per required work completed as per direction of engineer in charge.

Supply and Fixing of Double Slide (Ht. 2.5 Mtr, Side Frame 25mm pipe, Ladder 20mm pipe with 45 cm wide steps, Each Slide 8' with 4mm thick one piece FRP from top to end) required area 6.0m x 4.0m x 2 Slide with structure, Recommended Age 4-12 Years. Joint are well grinded filled with epooxy sealent and chemically cleaned before painting, all poarts done one coat of red oxide to avoid rusting & one coat of spray painted in multi colour for dazzling look with fixed in ground with cement concrete mix (1:1.5:3) size 30x30x45 cm including excavation of earth as per required work completed as per direction of engineer in charge.

Supply & Fixing of Globe Swing (Top Bar 50mm piep swing frame 25mm pipe, inner Frame 15mm pipe, Seats 3mm thick FRP reinforced with steel frame). Required area 1.50mx2.00m Ht. 1.5 Mtr. Leg Support 40mm pipe with structure, Recommended Age 2-12 Years, joint are well grinded filled with epoxy sealent and chemically cleaned before painting, all parts done one coat of red oxide to avoid rusting & one coat of spray painted in multi colour for dazzling look with fixed in ground with cement concrete mix (1:1.5:3) size 30 x30x 45 cm including excavation of earth as per required work completed as per direction of engineer in charge

Supply & Fixing of See Saw (Main Frame 40mm pipe, Main pipe 50mm pipe seat 4mm moulded non skid FRP seat, Bearing SP cast iron housing). Required area 2.0mx2.0m ht. 0.6 Mtr. with structure, Recommended Age 3-16 Years, joint are well grinded filled with epoxy sealent and chemically cleaned before painting, all parts done one coat of red oxide to avoid rusting & one coat of spray painted in multi colour for dazzling look with fixed in ground with cement concrete mix (1:1.5:3) size 30x30x45cm including excavation of earth as per required work completed as per direction of engineer in charge

Supply & Fixing of Duck MGR (Ht. 1.0 Mtr. Duck 3mm thick FRP Body with 10mm thick FRP Base Handle 15mm pipe,Footrest 20mm poipe capacity 4 seater) Required area 1.20m diameter color single/multi recommended Age 3-8 Years, Joint are well grinded filled with epoxy sealent and chemically cleaned before painting, all parts done one coat of red oxide to avoid rusting & one coat of spray painted in multi colour for dazzling look with fixed in ground with cement concrete mix (1:1.5:3) size 30x30x45 cm including excavation of earth as per required work completed as per direction of engineer in charge.

Supply and Fixing of Dustbin Ht. 3.5' Diameter 20" as per required work completed as per direction of engineer in charge

Supply & Fixing of Slide Big (Slide 8' with 4mm thick one piece FRP from top to end, Ht. 1.2 Mtr, Main Supports 25mm pipe, Deck & Railing 20mm pipe Ladder 20mm pipe.) Required area 3.00mx1.20m Recommended Age 3-8 Years, joint are well grinded filled with epoxy nsealent and chemically cleaned before painting, all parts done one coat of red oxide to avoid rusting & one coat of spray painted in multi colour for dazzling look with fixed in ground with cement concrete mix (1:1.5:3) size 30x30x45 cm including excavation of earth as per required work completed as per direction of engineer in charge.

Supply & Fixing of MGR (Ht. 1.00 Mtr. Platform Non Skid FRP Plate, Outer Ring 25mm pipe Handrail 20mm pipe) Required area 1.20 m diameter recommended Age 5-14 Years, joint are well grinded filled with epoxy sealent and chemically cleaned before painting, all parts done one coat of red oxide to avoid rusting & one coat of spray painted in multi colour for dazzling look with fixed in ground with cement concrete mix (1:1.5:3) size 30x30x45 cm including excavation of earth as per required work completed as per direction of engineer in charge.

Supply & Fixing of decorative cast iron (FG-15 grade as per IS : 2101 1993 standard) garden bench having to cast iron legs with Logo & painted by attractive texture black powder coated including 7 nos. planks of cold rolled special design M.S. pipe (18 gauge) tight appropriate with nut bolts. coloured with wooden powder coated (polyurthane type of powder paint) as per given section enclosed technical drawing as per direction of engineer incharge. The weight of decorative garden bench 48.61 kg. ± 5% size and detailing as per enclosed drawing. (Bench Size = 1.52 x 0.60 x 0.80)

Supplying & fixing as per Sample / Drawing ornamental Machine cut white Jodhpur sand stone ashler benches having stands & seat, as per follwing specification : - (a) One pair stand which thicknees up to 90mm , Height up to 41 cm & Width having as per under :- (i) At top & Bottom width are up to 41 cm (ii) At Center width are up to 27 cm (iii) Both end At 16 cm distance width are up to 22 cm (b)All side moulde seat up to 50 mm thick & size up to 2.10 m x 0.45 m ( tolrence variation in length are up to 5 cm)

PROVISIONAL SUM FOR UNSEEN CHARGESS (electrical Charges etc. Total Amount- 27.76 Lac) No, additional TP will paid.

Bidder Name

Amount

CHHAGANI RAM GEHLOT

M/s. Mother Garden Care

CHHAGANI RAM GEHLOT

CHHAGANI RAM GEHLOT