E-Tender 43/EDCs-2019-20

Electrical Items :

ST pole SP-72 bottom portion hot dip

ST pole SP-55 bottom portion hot dip

ACSR Panthr conductor

MS channel 125×65mm

MS Angle 75×75×6mm

MS Angle 65×65×6mm for Bracing

33 KV Polymer pin insulator with pin 10 KN

33 KV Polymer Disc insulator B&S type

Disc fitting B&S D/R 70 KN

GI wire 6 swg

GI wire 10 swg for guarding

Stay set 20×1800mm

Stay wire 7/8 swg

MS Earthing Road 20×2500mm

33 KV V-type X-Arm

Supply and fixing of following clamps with bolt & nut

PP Clamp SP-55

E/w clamp SP-55

Stay clamp SP-55

Bracing clamp SP-55 Top

Bracing clamp SP-55 Bottom

PP Clamp SP-72

E/w clamp SP-72

Stay clamp SP-55

Bracing clamp SP-72 Top

Bracing clamp SP-72 Bottom

PG clamp for panther conductor

Safe cartage of following material from store center to road side of work with loading unloading and proper stacking both end approx dist. 20 Km.

ST pole SP-72

ST pole SP-55

Small line materal

H/L cartage of following material from road side of work site agr. Dist. 0-3 Km.

ST pole SP-72

ST pole SP-55

Small line materal

Digging of pit for erection of following type of pole in all type of soil and fixing of all accessories of pole and erection of support and grouting of pole in CC ratio 1:4:8 block including cost of ballast cement and sand back filling of soil and bouldes in pit and ramming rarnd proper allgnment, leveling as per RESSPO construction manual.

ST pole SP-55 single Pole

ST pole SP-55 Double Pole

ST pole SP-55 Four Pole

ST pole SP-72 Single Pole

ST pole SP-72 Double Pole

ST pole SP-72 Four Pole

Muffing of poles with CC 1:3:6 block and 45 cm hight from ground level including cost of ballast cement and sand etc.

Erection with digging of pits for stay as per RESPO manual in all type of soil grouting of stay rod with CC 1:4:8 cement and sand after grouting back filling of soil and boulders in the pit and ramming, nozzaling and fixing stay wire the pole and stay rod as per drawing for 33 KV

Dismantling of 33 KV line ACSR Dog Conducctor

Laying, spreading, stringing and sagging of 33 KV line in 3 phase ( 3 phase 4 wire) of the followin wire as phase wire with GI earth wire complete including fixing of all accessories in 3 Nos. Conductor in parallel with binding and jumperigngper profile and sagging chart.

Fabrication of MS channel Angle iron after cutting in required sizes with drilling of holes up to good finish for top channel, bracing and special type bracket etc. As per RESSPO schedule and local approved drawing.

Erection and earthing of support with MS earth rod 2.5 meter longr including excavation of pit and digging of MS rod to proper depth and connecting the earth electrode with the help of GI wire as per construction manual.

Route alignment and survey of 33 KV

Making of section pole for 33 KV line complete in all respect.

Guarding wire 33 KV

Fixing of special type bracket for line etc.

Excavation * digging of all type of soil and bolders (1×1×1.9)×9+(2.5×1×.9)×18+2.5×2.5×.9)×6

CC 1:4:8 top & bottom (1×1×1.3)×9+(2.5×1×.3)×18+(2.2×2.5×3)×6

RR stone masonary with 1:6 (1×1×1.0)×9+(2.5×1×.5)×18+(2.2×2.5×1)×6

Route clearance by cutting of tree branches/ proning, loping and chopping of trees for 33 KV line

Painting of poles with angle and channel and all steel part by one coat of red oxide primer and two coats of aluminum paint and two strip of fluorescent altemate red and white paint 30 Cm wide up to 1.5 mtrs from ground level.

ST pole-72

ST pole SP-55

Providing and fixing of Danger board, under plate complete by providing clamps of MS flat 50×6 mm and nuts & bolts, Danger Boards of MS Sheet 2mm

T-off connection complete 33 KV

Back head load cartage & cartage of ACSR dog conductor scrap from work site to store centre srinagar Garhwal.

Saun Engineering and Construction Co P Ltd

UTTARANCHAL FORGINGS INDUSTRY