REPAIR TO PLAY GROUND, OBSTACLE COURSES SWIMMING POOL AND FIRING RANGE ETC UNDER GE I NAVY JAMNAGAR

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etcand removal of entire debris as ordered outside MD land complete all as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etclaid bedded and pointed in any mortar complete including removal of entire debris as ordered outside MD land complete all as directed.

M & L for plain cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in cast in situ in bed blocks for grouting hold fasts, coping, filling in pressed steel chowkat or similar work including necessary form work as required complete all as specified and directed.

M&L pre-cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with factory made solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified.

S&F mild steel work in tubular trusses, posts, purlins, rafters etc using mild steel tubes of square/ rectangular confirming to IS 4923 - 1968.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with bolted or welded attachment Fe-410- W(Gde- E-250) quality-B.

M & L for 75 mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in sub-floors, sub-bases, floors and pavings, etc. complete all as directed.

M&L 16 to 18 mm thick granite slab (Jet black) work (table rubbed, polished and rounding of edges where ever necessary as ordered) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all directed and specified. (Note : Quoted rate is deemed to be inclusive of rounding of edges and cement screed)

M&L Machine pressed coloured chequered cement concrete tiles of size 300x300x25 mm thick (confirming to IS: 13801-1993 and shall contain ISI mark) machine pressed with grey cement and pigments, set and jointed in neat cement slurry in floors and pointed with coloured cement to match the shade and laying on 15 mm thick screed bed in CM 1:6 complete all as specified.(Note : i) Quoted rate is deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work)

M&L M-35 grade, 60 mm thick machine pressed precast cement concrete interlocking paver blocks any shape and size with grey cement and pigment confirming to IS: 15658-2006, laid over and including 50 mm thick compacted sand cushion complete complete all as specified.(Note ; Quoted rate is deemed to be inclusive of 50 mm thick compacted sand cushoning).

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement morter 1:4 surfaces finished even and smooth without using extra cement .

M&L preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as directed.

M&L for preparation of old wall surface and applying one coat of white wash

M&L for preparation of old wall surface and applying one coat of cement base paint

M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of exterior walls and applying two coats of antifungal exterior emulsion weather proof paint (Apex) complete all as specified.

M&L preparation of old plastered / concrete wall surfaces of any description, not otherwise described, and applying two coats of synthetic enamel paint over cement based primer complete.

M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed.

M&L for one coat of first quality synthetic enamel paint of any description over 10 cm in width or girth on old painted steel surface after necessary preparation of surface complete all as directed.

M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over not exceeding 10 cm in width or girth when unconnected with other painting or when painted in a different tint including necessary preparation of new steel surface complete all as directed.

M&L for Cement Concrete work in pavement /hard standing of flexural strength 40 kg/sq cm in field using 400 kg of cement per cubic metre thickness of concrete 25 cm or less after finishing the surface of concrete roads pavements by brooming etc to the satisfaction of Engineer-in-charge .

M&L forming Contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound Grade 'A'

M&L for forming 12 mm thick expansion joints for 100 mm thick concrete slab, filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound Grade ‘A’ all as specified.

OCEAN CONSTRUCTION

SHREE KHODIYAR TRADERS

Indobuildenterprise

Parimal Builders

S t modi

Micro Protect

M/s.Bhavin Electricals