Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.7 LAccepted-AOC | ₹15.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹15.7 L+₹1,475 (0.09%)Rejected-AOC NO 6 173 2 EARIKARAI KALAPARAPATTY PO SALEM SOUTH TALUK VEMBADITHALAM VIA SALEM 637504 | SALEM | TAMIL NADU | 637504 | ₹15.7 L+₹1,475 (0.09%) | L2 | Rejected-AOC L2 |
| 3 | L3₹16.6 L+₹95,200 (6.08%)Rejected-Finance | ₹16.6 L+₹95,200 (6.08%) | L3 | Rejected-Finance WORK AWARDED TO L1 BIDDER |
Tender Value
₹18.9 L
EMD Value
₹50,000
Closing Date
13 Dec 2023, 5:00 pmClosed
CHIEF ENGINEER, KSCADC
CHIEF ENGINEER KSCADC Building, Kamalewsaram , Manacaud P.O. Thiruvananthapuram Pin-695009
Infrastructure Works related with National Fish Seed Farm, Neyyar - Balance Fencing and Plumbing for RCC Tank
2023_SCADC_628106_1
ET-39/2023-24
Open Tender
Civil Works - Others
Item Rate
90 days
Neyyar
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,950
₹50,000
16 Feb 2024
4 Dec 2023
15 Dec 2023
4 Dec 2023
13 Dec 2023
4 Dec 2023
Amount
Balance Fencing and Plumbing in RCC Tanks
2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
od299721/2022_2023 : Steel work in built up tubular trusses in lines and levels with hot dipped galvanised (outside and inside) round, square or rectangular hollow tubes made by TATA STRUCTURA or equivalent
16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
50.6.1.8 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete
13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
50.18.8.8.2 : Providing and fixing PVC pipes, fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per the direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 4 kgf/cm2
50.18.8.7.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2
V P M PROJECTS
S.B.MOHAMMED KUNHI
Bidder Name
S.B.MOHAMMED KUNHI
V P M PROJECTS
M PRABHU
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_948462.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .