REPAIR AND POLISHING TO VARIOUS WOODEN FURNITURE AT AF STATION JAMNAGAR UNDER GE (AF) JAMNAGAR NO.1

Amount

Removing following old and unserviceable parts / components of “Bed Plywood Top” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 246, 247)

Head rest complete.

Foot rest complete.

Plywood top with 12 mm thick BWR commercial .

Long rail of first class hard wood (teak wood).

Short rail of first class hard wood (teak wood).

Both side veneered Head Rest.

Both side veneered Foot Rest

Removing following old and unserviceable parts / components of “Chair dining with cushioned ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/04)

Front Leg made of one piece of first class hard wood (teak wood).

Rear Leg made of one piece of first class hard wood (teak wood).

Bottom stiffener long made of one piece of first class hard wood (teak wood).

Bottom stiffener short made of one piece of first class hard wood (teak wood).

Short rail of seat made of one piece of first class hard wood (teak wood).

Long rail of seat made of one piece of first class hard wood (teak wood).

Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered with tapestry.

Removing following old and unserviceable parts / components of “CHAIR EASY” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229)

Front / Rear legs made of first class hard wood (teak wood).

Arm rest made of first class hard wood (teak wood).

Seat Front / Rear / side rail made of first class hard wood (teak wood).

Back Upper / bottom rail made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “CHAIR DINING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-279)

Front legs made of first class hard wood (Teak wood).

Rear legs made of first class hard wood (Teak wood).

long / short rail of seat made of first class hard wood (Teak wood).

Stiffener of back made of first class hard wood (Teak wood).

Short & long stiffener of bottom made of first class hard wood (Teak wood).

Removing following old and unserviceable parts / components of “Peg Table” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-236 & 277

Removing old unserviceable tops from peg table and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “ SIDE BOARD” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-26 (M) / 371)

Back made out of 4 mm thick plywood.

Removing old unserviceable tops from Side board and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Door made all as per item No 6.02 of size as per drawing.

Drawer made all as per item No 6.02 of size as per drawing.

100 mm size Aluminium hasp & staple

knob 40 mm dia

Removing following old and unserviceable parts / components of “Table centre” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-235 & 274

Removing old unserviceable tops from Table centre and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “Table Computer” and S & F new parts / components of same size, existing pattern and the same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/03)

Removing old unserviceable tops from Table computer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Drawer made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around as per manufacturer's instructions and other side French polishing with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Pull out tray for mouse made all as per item No 8.02 of size as per drawing.

Pull out tray for Key Board made all as per item No 8.02 of size as per drawing.

Removing following old and unserviceable parts / components of “TABLE DINING 6 / 8 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-239 & 273)

Removing old unserviceable tops from Table dining 6 person and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Top for TABLE DINING 8 PERSON made all as per item No 9.01

Legs made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long rail for TABLE DINING 6 PERSON made of first class hard wood (teak wood).

Long rail for TABLE DINING 8 PERSON made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE BED SIDE ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 276 )

Back of 6 mm thick commercial face plywood.

Side (right & left) made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) all as specified in drawing

Top / middle shelf all as per item No 10.02 of size as per drawing.

Removing following old and unserviceable parts / components of “Table dressing gents with mirror” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD 230)

5 mm thick Looking Mirror with 06 mm thick plywood at the back with complete frame of first class hard wood

Lower wooden box made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) and one side French polishing, 6 mm thick back plywood & knob 40mm dia complete all as specified in drg as directed by Engr-in-charge.

Removing following old and unserviceable parts / components of “Teapoy wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-232 & 278)

Removing old unserviceable tops from Teapoy wooden and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drawing and as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-41, 224, 283)

Removing of old unserviceable top of table 3 x 2 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drawing and as directed by Engr-in-charge.

Leg made of first class hard wood (teak wood).

Long rail made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long bottom stiffeners made of first class hard wood (teak wood).

Short bottom stiffeners made of first class hard wood (teak wood).

Complete drawer made out of 12 mm thick plywood.

Removing following old and unserviceable parts / components of “Table 3 x 3 wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-88 M, 291)

Removing of old unserviceable top of table 3 x 3 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drawing and as directed by Engr-in-charge.

Leg made of first class hard wood (teak wood).

Long rail made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long bottom stiffeners made of first class hard wood (teak wood).

Short bottom stiffeners made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE WRITING (STUDY) ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and olishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-33 & 275, 249.

Top made out of 18 mm thick pre-laminated particle board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drawing and as directed by Engr-in-charge.

Legs made of first class hard wood (teak wood).

Drawer made out of 12 mm plywood.

Shutters made out of 18 mm thick pre-laminated particle board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around all as specified in drawing and as directed by Engr-in-charge.

M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge.

Removing following old and unserviceable parts / components of “TABLE DRESSING LADIES” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 251)

Looking Mirror of approved quality with back of 06 mm plywood and frame

Lower wooden box with drawer made out of 18 mm thick pre-laminated particle board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around, 6 mm thick back plywood, 4 mm thick sliding glass, Aluminium channel etc complete all as per drawing.

Removing following old and unserviceable parts / components of “CHAIR WRITING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-250, 280, 285)

Front legs made of first class hard wood (Teak wood).

Rear legs made of first class hard wood (Teak wood).

Front / Rear / Side rail of seat made of first class hard wood (Teak wood).

Stiffener of Back made of first class hard wood (Teak wood).

Short / long stiffener of bottom made of first class hard wood (Teak wood).

Removing following old and unserviceable parts / components of “REPAIRS TO HAT STAND WITH MIRROR” and S & F new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-233)

5 mm thick looking mirror.

3 mm thick Veneered plywood.

9 mm thick Back Plywood.

Aluminium Peg.

Repairs to Recliner by replacing of unserviceable seat / back cushion foam with tapestry cloth / rexin / leatherite and other accessories what so ever required as per existing pattern / structure and sample approved by Engr - in - Charge. (Drg No.Stellar,Godrej,Durian).

Repairs to Sofa set 5 Seater by Replacing of unserviceable seat / back cushion foam with tapestry cloth / rexin / leatherite and other aceesories what so ever required as per existing pattern/structure and sample approved by Engr - in - Charge. (Drg No. HOF/Godrej/Durian.

Removing following old and unserviceable parts / components of “Sofa set 4 Seater” and S & F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373)

Arms made out of teakwood.

Front leg made out of teakwood.

Rear leg made out of teakwood.

Batten for seat and back made out of teak wood

M&L for cushion foam of 40 density with fabric cushion cover for seat ,Superior quality of foam & cover tapestry cloth approved by GE not less than 340/- per Running metre (Drg No FD-281)

Removing following old and unserviceable parts / components of “Sofa set 5 Seater” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (FD - 281 / 258 / 373)

Arms made out of teak wood.

Front leg made out of teak wood.

Rear leg made out of teak wood.

Batten for seat and back made out of teak wood.

M&L for cushion foam of 40 density with fabric cushion cover for seat ,Superior quality of foam & cover tapestry cloth approved by GE not less than 340/- per Running metre (Drg No FD-281)

Removing following old and unserviceable parts / components of “BOARD NOTICE” of size 2440 mm x 1220 mm and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw,etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-99)

Complete Frame (top, bottom & side) of sectional area 75 mm x 75 mm made of first class hard wood (teak wood).

Green baize cloth, 12 mm thick sofa board including 6 mm thick commercial plywood.

Horizontal stiffener of sectional area 19 mm x 25 mm made of first class hard wood (teak wood).

Vertical stiffener of sectional area 19 mm x 25 mm made of first class hard wood (teak wood).

3 mm thick glass for shutters with 10 mm x 10 mm sectional area first class hard wood (teak wood) beads.

Mild steel key plate.

S & F in wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail various types of wooden table(Table dining, table writing, Table 3x2, Bed plywood top) fixed with 2 Nos screws and duly polishing to match with existing complete as directed by Engr-in-charge.

M&L for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth and applying one or more coat of French polish / clear Varnish as directed by Engr-in-Charge :

Bed plywood (FD 246)

Board Notice (GE (AF) J/FD-19-03)

Chair dining (FD 279)

Chair Dining FD/MAP-II/04

Chair dining long back (FD-357 )

Chair easy (FD-229)

Chair writing (FD 250,280)

Hat stand with mirror (FD-362)

Peg table (FD 277)

Stool dressing ( FD/MAP-II/07)

Sofa set 5 seater (FD 281)

Sofa set 4 seater (FD 281)

Table office officer (Drg No - DB 4120)

Table dining for 6 persons (Drg No - FD 239, 273)

Table dining for 8 persons (Drg No - FD 239, 273)

Table writing (Drg No - FD 249,275

Table centre (Drg No - FD-274)

Table dressing gents with mirror (Drg No - FD 238, FD/E6/MAP/16)

Table dressing ladies with mirror (Drg No - FD 378,251 FD/MAP-II/07 )

Teapoy (Drg No - FD-232,278)

Table bed side (Drg No -FD/E6/MAP15 (R) )

Table 1520 x 860 x 760 (Drg No - FD 139,289)

Table 900 x 600 x 760 w/o drawer (Drg No - FD 223,224,283)

Raj brothers

M/S Super Steel Works

Dhangot Brothers

motwani and associate

M/S Rajendra Constructions