Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC FLAT NO 1 GURUKRUPA APARTMENT BEHIND TELEPHONE EXCHANGE DEHUROAD PUNE | PUNE | PUNE | MAHARASHTRA | 412101 | L1 | Accepted-AOC Accepted as L1 | |
| 2 | L2₹41.1 L+₹2.0 L (5.12%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹41.4 L+₹2.3 L (5.95%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹41.5 L+₹2.4 L (6.03%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹41.7 L+₹2.6 L (6.68%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
3 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehu Road, Pune
GE Dehu Road, Pune
SPL REPAIR TO BLDG NO T08 AT COD AND PROVN OF STORE ROOM CHANGING ROOM WITH WASHROOM FOR GENTS AND LADIES INDUSTRIAL PER SEPARATELY WITH ALLIED WKS IN RE AND AA IN B SUB DEPOT AT 29 FAD AND CERTAIN MINOR REVENUE WKS UNDER AGE BR EAST AT GE DEHU ROAD
2022_MES_551325_1
8674
Open Tender
Civil Works
Item Rate
180 days
GE Dehu Road, Pune
Please refer Tender documents
7 documents required · 7 mandatory
₹500
Yes
GE Dehu Road, Pune
₹90,000
Yes
21 Oct 2022
12 Sept 2022
8 Oct 2022
12 Sept 2022
3 Oct 2022
26 Sept 2022
60 days
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out Hard / dense soil all as specified and directed.
All as per Item no 3 above but additional 1.5 m or part thereof in depth beyond the first 1.5 m and getting out hard Rock by chiselling complete all as specified and directed.
M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed by Engr-in-Charge..
M & L for Cement concrete 1:4:8 D2 type using 40mm graded stone aggregate in foundations, filling and mass concrete.
M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius in half brick walls built in CM 1:6 all as specified and directed.
M & L for 40 mm thick Cement Concrete M-15 Nominal Mix type B1 (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately.
Supply only Integral water proofing compound (WPC)
M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement secified and directed by Engr-in-charge.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified and as directed.
M&L for 75mm thick P.C.C 1:4:8 type D-2 in sub base of floor complete all as specified and directed by Engr-in-Charge.
M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement.
M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge.
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors laid over and including 15 mm thick screed bed in CM 1:6 as in etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match.
Ditto above item No 17 but on skirting with & including 10 mm backingcoat in CM 1:4 complete all as specified and directed .
M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & incl backing coat 10mm thick in CM 1:4 all as specified and directed .
M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.
M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed by Engr-in-Charge.
Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point.
M&L for 50 mm thick PCC 1:3:6 type C2 in plinth protection finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M & L for Reinforced cement concrete 1:2:4 Type B1 (20 mm graded aggregate) Beams, cantilevers, bressumm ers, lintels over 1.5m spcomplete all as specified and directed.
M & L for Reinforced cement concrete 1:2:4 Type B1 (20 mm graded aggregate) in chajja complete all as specified and directed.
M & L for Reinforced cement concrete 1:2:4 Type B1 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.
Formwork to chullah hoods, chajjas, troughs and similar items including edges
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for 20-25 mm thick Machine cut cudappah stone slab over and including 10 mm thick cement screed base in cm (1:6) , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M & L for 20 mm thick Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete
Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing
S&F 30 mm thick factory made solid panel PVC door shutter ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.
S&F for pressed steel door frames of size 125 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm complete all as specified and directed.
S/F 30mm thik flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.
S&F butt hinges, medium weight, cold rolled mild steel, size 100mm complete all as specified and directed.
S&F 250mm length MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, .complete all as specified and directed by Engr In Charge.
S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.
S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.
S&F 150mm barrel tower bolts, stove enamelled black, with bright bolt.complete all as specified and directed by Engr In Charge.
S&F MS pressed handles, oval type, stove enamelled black size of 125mm complete all as specified and directed.
S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr In Charge.
M & L For Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick for ridge of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Material & labour for two coats of synthetic enamelled paint over a coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge.
Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge.
S&F Rolled Sections as in main cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) complete all as specified and directed
S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I.wire ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified
S&F 500 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified.
S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified.
S&F 20mm bore ball valve high pressure of PTMT with epoxy coated alluminium rod and high density plastic ball secrewed for iron pipe and fixed . ( Minimum wt 15 mm - 142 gms/20 mm - 210 gms)
S&F 15 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.
S&F 20 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.
S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..
S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..
S&F repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete
S & F Vitreous China Half stall type urinals, white, with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed.
S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.
S & F PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connecting to the WC and making good to the floor with PCC including waste pipe all as specified and directed.
S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge.
S & F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms
S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge.
Supply & fixing 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge..
S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F PTMT urinal spreader of 300mm length & 15mm size with PTMT nuts complete all as specified and directed by Engr-in-Charge
S&F C P chromium plated floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.
S&F repair CP jet spray with one mtr flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge
S&F repair health Faucets with flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge
M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.
S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors
S & F 75 mm dia bore PVC (SWR) bends any radius
S & F 110 mm dia bore PVC (SWR) bends any radius
S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal
S & F PVC (SWR) 110 mm bore vent cowl
S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall.
M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 100 mm complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 100 mm bore RCC pipe complete all as specified and directed.
Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as specified and directed.
Demolition of concrete ( un reinforced ) in ground floors and paving n.exc 15 cm thk (below or above ground level) complete all as specified and directed.
Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.
Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid. complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for . complete all as specified and directed.
Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete. complete all as specified and directed.
M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement. complete all as specified and directed.
M&l Complete removal of existing treatment of painted surfaces and priming with alkalie resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.
M & L complete removal of existing treatment of painted surfaces applying two coats of cement paint over a coat of alkali resistant priming paint complete all as specified and directed.
M & L cement concrete 1:2:4 type B-1 (20mm graded agg) 40 mm thickness in Surface chanel for floor finished, complete all as specified and as directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.
M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete. complete all as specified and directed.
Ditto above item No 94 above but on skirting over 10 mm th rendering in CM 1:4 complete. complete all as specified and directed.
M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.
Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour. (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.
S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete
M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over & including screed bed 15 mm thk in cm 1:6 .complete all as specified.
S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.
M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M&L for 50 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone agg in sub base of floor.complete all as specified and as directed by engr-in-charge.
M&L 75 mm thick PCC (1:3:6) type C-1 (using 40mm graded stone agg) as in plinth protection finished even and fair without using extra cement.complete all as specified and as directed by engr-in-charge.
M&L PCC (1:3:6) type C-1 (using 20mm graded stone agg) filling of pressed steel door frame complete all as specified and as directed by engr-in-charge.
S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge.
S & F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F 4 mm Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and as directed.
PCC 1:3:6 type using 20 mm graded trap stone aggrgate in coping complete all as specified and as directed.
M&L formwork to side and soffits of floor or roof beam beam hauching, girder bressummers ,lintels cantilivers shelves including supports overhangs etc. also splays between floor and beams stc. complete all as specified and as directed.
S and F in repair stainless steel sink 1 mm thk for kitchen with plug waste pipe washers incl cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortor on to dwarf wall overall size 495x420mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling in repairs complete all as directed.
Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.
Taking down shutter of any description n. exc. 1 sqm each complete all as specified and directed.
E/M Part
Taking down old u/s point wiring & M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws :-
One light point controlled by one switch
One fan point controlled by one switch & regulators
One socket 5 pin 5 Amps flush type on independent board
One socket 5 pin 5 Amps flush type on same board
M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing
S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 2.5 sqmm copper conductor cable for earth continuity. (Note : 2 runs of 4.0 sqmm cable, one run of 2.5 sqmm cable and one run of PVC casing capping will be measured as one RM).
S&F switch piano flush type single pole one way 5 Amps
S&F switch socket combination 2 in 1, 5 Amps flush type
S&F switch socket combination 2 in 1, 15 Amps flush type
S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block
S&F regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep
MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way
supply and fix in repair isolator TPN 40 Amps 415 volts
S&F MCB SP 240 volts 6-32 Amps
S&F isolator SPN 40 Amps 240 volts
supply and fix in repair MCB SP 240 volts 40 Amps
S&F in repair LED Recess mounted LED fitting 36/42 Watts CAT NO PLUTONEO2X2PLR34WLED840S of HAVELLS or HPLLEDEPN36WWS of HPL or LULT01S042XC/XN/XW of jaquar
Supply and fix in repair LED T-5 Fitting 18 Watts LED including provision of connections cable pvc unsheathed stranded copper conductor and pvc square block of size 80mmX80mm MODEL:LHEXACP7IN1S018 MAKE :Havells or Equivalent inPhilips/Luker/HPL
Supply and fix in repair LED Fitting 9 Watts LED including provision of connections cable pvc unsheathed stranded copper conductor and pvc square block of size 80mmX80mm MODEL:LHEXBLP7IN1W009 MAKE :Havells or Equivalent in Philips/Bajaj/HPL
S&F in repair Supply and fixing LED street light fitting 35/40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make : ENDURAPEARLS35WLED757SASYTOPC of Havells or equivalent inPhilips/ Bajaj/ CG/Luker
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make :- Havells/Bajaj/Crompton
Material and labour for replacement of unserviceable street light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including MS clamps made out of 40mmX6mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size all as directed incl taking down of old unserviceable bracket.
M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamber with cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.
S & F in repair sheet metal enclosure single pole and neutral with two pin earth plug and socket complete with double pole MCB 20 amp 240 volt AC supply
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and directed by Engr in charge.
Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of following sizes including taking down old unserviceable over head conductors and insulators channels carefully as directeed by engineer in charge
16 Sqmm x 3.5 Core
16 Sqmm x 2 Core
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-
Soft / loose soil
Hard dense soil
Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.
M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the 40 mm dia outer dia. Make:-Infra/Supreme/Prince
M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.
M & L of new Gl steel tube Light grade galvanized of size 80 mm dia with all fitting laid in trenches complete and all as specified and directed by Engr in charge. Make : Jindal/ Tata/ Prakash Surya/ Ravindra./Swastik
Supply and Lay pipe galvanised Medium class including fitting complete 40 mm dia
Supply and Lay pipe galvanised Medium class including fitting complete 25 mm dia
Supply and Lay pipe galvanised Medium class including fitting complete 20 mm dia
Supply and fix gate valve stop screwed 20 mm
M&L for MS Work i:e includes material,cutting,welding,other process for shaping of material to get into required shape as per site requirment and fixing on site. Note: Earthwork will be measured and paid separately
AVS CONSTRUCTION
DR J S CHADHA AND SONS
Dinesh Constructions
M/S B.A. GAIKWAD
Star Construction
Samyak Engineers
KARPE AND SONS CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .