Construction of Bus stand at Jaisinghpur, Distt Kangra. H.P.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x1.5 sqmm +1x1.5 sq.mm earth wire

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 50 mm

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supply and Fixing of Cubical Panel MCCB 100A 4P 25KA: MCCB 100A 4P 25KA TMR with (O/L) and Short Circuit (S/C) Protection – 1 No. Spreader Link for MCCB 100A 4P – 2 Nos Indication Lamps (LED type) RYB – 3 Nos Control SP MCB 6A 10KA - 3 Nos Fabrication, Painting & Assembly Charges of cubical type, indoor-type, single-door, wall-mounted, fixed-type, free-standing, single-front, dustproof, artmentalized (DB) made out of MSCRC sheet 16G, duly painted with Siemens grey powder-coated paint as per drawing. Assembly Charges of 100A, 4-strip Copper (Cu) busbar (vertical and horizontal) tooth strip throughout the length of the panel). Current density of Cu bus bar shall be 1 mm x 1 mm = 1.66A. Copper shall be electrical grade. Busbar supports shall be DMC epoxy insulators. All busbar links shall be fully covered with insulated sleeves with heat shrinkable sleeves of coloured coaded R Y B B Assembly charges for Cu solid/Cu flexible wire interconnection – busbar to MCCB and MCCB to field side for cable termination, duly covered and insulated with heat shrinkable sleeves of colored code (Red, Yellow, Blue, Black). All interconnections on fields sides shall be supported by conical Lexan finger-type insulators of adequate size to support be surtain the weight of cable. Control wiring with Cu flexible wire size of control wire shall be 2.5 sqmm for CT circuit 1.0 sqmm for control wiring with thinable printed sleeves tie and belt etc. Assembly Charges for Accessories of accessories such as neoprene gasket, door locks, Cu flexible door earth, legend plates, etc.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Double pole. Cat-A. 63 Amps.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Enclosure 6 double Door

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Enclosure 8 double Door

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Enclosure12 double Door

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. but without charcoal/ coke and salt as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Armoured cable 6 sq. mm (twin core)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Armoured cable 10 sq. mm (twin core)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Armoured cable 25 sq. mm (3.5 core)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Armoured cable 50 sq. mm (3.5 core)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:- 25 Liter capacity water heater (Cat-A)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: of Approved Make Ceiling Fan 1200 mm sweep

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and erection of 3 stepped steel tubular swaged and welded pole of suitable length and dia. to be fixed up to a required planting depth below G/L in a hole of excavation about 30 cm dia. and of suitable depth, to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- (b). Overall length 8 meter, with planting depth 1.5 m, length of sections 4.5 m, 1.75m and 1.75m (bottom, middle and top respectively), outer dia and thickness of sections 127mmx4.5mm, 101.6mmx3.65mm and 76.1mmx3.25mm (bottom, middle and top respectively) with approximate weight 84 Kg.

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:-

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make Square/round LED Panel Light 15W Surface

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make Square/round LED Panel Light 18/20W Surface 1'X1'

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make Square/round LED Panel Light 36W Surface 2'X2

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make LED Batten Light 20W

S/F Led Bulk head 9/10 watt (6500k) of syska or its equivalent approved make of complete with connections etc as required capable in all respects.

S/F Pressure die cast aluminium housing, powder coated with weather proof gasket ensuring IP66. Heat resistant toughened glass. High Efficiency Street Lighting lenscs. Surge protection-Inbuilt 4KV. Optional 10KV with external Surge Protection device Constant Current LED Driver with >>85% efficacy. THD < 10% and power factor > 0.95 LED Junction Temperrature <65°C LED Colour - W.W., N.W., C.W. (2700K-6500) Twinkle Make Only LuxMax-SLJ-90 (90 Watt LED Street Light) price list with effect from w.e.f 1st June, 2020

S/F of Exuast Fan shutter for 300 mm Exaust fan

Providing and Installation of industrial wall Mounting Turbo force fan of Following Size motor I/E hang the same in position on the wall connection testing and commissioning with best satisfaction of enginner in charge. 450mm

Supplying & fixing of MCCB 63 Amp 2 pole 240 volt in sheet steel enclosure including fixing etc.

S/F computer point with modular switch & socket 2 nos. switch + 3nos. Modular socket complete in all respect connections etc. as required.

S/F Pressure die cast aluminium housing, powder coated with weather proof gasket ensuring IP65. Heat resistant toughened glass. Optics-Controlled beam with lenscs. Surge protection-Inbuilt 4KV. Optional 10KV with external Surge Protection device Constant Current LED Driver with >>85% efficacy. THD < 10% and power factor > 0.95 LED Junction Temperrature <65°C LED Colour - W.W., N.W., C.W. (2700K-6500) Twinkle Make Only LuxMax-FL-Q-100 (100 Watt LED Flood Light)

Supplying and fixing sheet metal bus-bar chamber suitable for 300 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area (31.75mmx6.35mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions 530mmx500mmx200mm) nominal with all accessories including connections, earthing the body etc. as required:-

S/F of 320A Main switch Kit Kat (Rewirable) with rewirable porcelain fuse units 320A with enclosure 415V as per cat no:-IHBRTE4320,Triple pole with neutral link 415V,50Hz w.e.f 13.08.2021

Please Enable Macros to View BoQ information