COMPREHENSIVE REPAIR OF PATH, KERB STONE, AREA DRAINAGE, COMPOUND WALL OF MD, OTM AND OTHER MISC WORK ALONG LEHL MARG UNDER GE (S) BINNAGURI

Amount

Demolition of cement concrete (reinforced) of any description in any position not otherwise specifically provided for complete all as specified.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soils complete all as specified.

Removing excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed complete all as specified.

M&L for Endura tiles of size 300 x 300 x 10 mm set, jointed and pointed in neat cement slurry over in pavement / footpath / floors complete all as specified and as directed.

M&L for 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B-0 (using 12.5 mm size graded crushed stone aggregate) as in coping incl weathering, slightly rounded or chamfered angles & thickness and necessary use and waste of formwork complete all as specified.

M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 40mm garded crushed stone aggregate) as in path/ steps laid/ plinth protection with and incl use and waste of form work and finishing the surface even and rough to receive the topping layer of tiling complete all as specified..

M&L for cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concerete complete all as specified

M&L for 25 mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate), finished concrete surfaces even and rough to receive floor finishes complete all as specified.

M&L for 40 mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate), as in floors finished concrete surfaces even and smooth without using extra cement using PVC deviding strip complete all as specified.

Supply only 38mm wide plastic dividing strips, 1.5 mm thick complete all as specified.

M&L for reinforced cement concrete (1:1.5:3) type A1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for providing precast reinforced cement concrete (1:1.5:3) type A1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM (1:4) including necessary use and waste of formwork complete all as specified.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified.

M&L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L for pre polished coloured chequered cement concrete tiles made with grey cement and pig-ments of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over in pavement / footpath / floors over incl 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channels/ drain including forming fair finished to drain channel complete all as specified.

M&L for brickwork with burnt fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified.

M&L for brickwork with burnt fly ash old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed.

M&L for providing precast cement concrete (1:2:4) type B0 (using 12.5 graded crushed stone aggregate) as in louvres and jallies, 40mm thick (measured solid), including all mouldings and frame and set in CM (1:4) complete all as specified and directed.

M&L for brick work with sub class B bricks laid on edge on vertical inclined sides of drain, bedded and jointed in CM (1:6) and pointed in CM (1:3) complete all as specified and as directed.

M&L for brick work with sub class B bricks laid flat on vertical inclined sides of drain, bedded and jointed in CM (1:6) and pointed in CM (1:3) complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete, complete all as specified.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide for rough finished surfaces of concrete, complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement morter 1:4 with water proofing compound (WPC shall be measured and paid separately under respective item) finished even and fair complete all as specified and as directed

Supply only liquid water proofing compound complete all as specified.

M&L for mild steel TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified.

M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking, bending and binding with MS wire, not less than 0.9 mm dia or securing with clip complete all as specified.

M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over finished putty surfaces of wall complete all as specified and as directed and as per the manufacturer's instructions

M&L for preparing of new plastered surfaces of wall and applying two coats of wall care putty (with minimum Avg thickness of putty 1mm for each coat) including preparation of surface to receive finishes (primer, distemper, paint etc.) complete all as specified and as directed and as per the manufacturer's instructions.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410 -W (Gde-E- 250) quality- A complete complete all as specified.

M&L for steel work in trusses, purlins, posts and the like using tubular/ square hollow section including special shaped washer, Nuts and bolts etc. complete using ERW or induction butt welded tubes/SHS conforming I.S.1161-2014/IS 4923-1977 grade St-240 complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated/ semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old unserviceable sheet any type and description complete all as specified.

M&L for preparation of new or previously untreated steel/ iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic ennamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

All as item No 14 here-in before but on vertical surfaces cut to required size and shape laid over 10mm thick rendering in CM (1:4) complete.

M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles in floor etc set and jointed in neat cement sluury and pointed in white or coloured cement to match with shade of tile laid over and including 15mm thick screed bed in CM (1:6) complete all as all as specified.

M&L for glazed coloured ceramic tiles (450x300x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match with shade of tile fixed over and including 10mm thick rendering/ backing coat in CM (1:4) complete all as specified and directed.

M&L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified.

M K Engineering WOrks (BID ID -3488201)

M S S DASGUPTA (BID ID -3490648)

M/S SHIVNATH SINGH (BID ID -3490000)

M/S East India Traders (BID ID -3488975)

MESSRS SEN BROTHERS (BID ID -3488144)

Biswanath Sharma (BID ID -3490964)

CENTRAL ENGINEERING WORKS (BID ID -3489923)