ADDN ALTN TO ROOFING FALSE CEILING AND JOINERY IN BLDG NO E 15A 16A E 11A 12A OR COOK HOUSE UNDER 202 ENGR REGT UNIT LOCATION UNDER GE N SECBAD

Amount

Dismantling of Single layer Mangalore pattern tiles in roofing complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa with coach screw and washer/self tapping screws in roof, wall cladding etc complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa with coach screw and washer/self tapping screws in roof, wall cladding ridges etc complete all as specified and as directed.

Dismantling timber Scantling framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq.cm in section and deposit AGE B/R No I store complete all as specified and as directed.

Dismantling timber Scantling framed work 40 sqcm and over in section, in any position and removing and deposit to AGE B/R No I store complete all as specified and as directed.

Supply and fix hand rails, half rounded or other steel section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling or riveting etc and similar work confirming to Fe-410-0 of Fe-310-0 of Gde E-165 complete all as specified and as directed.

S&F Rolled Mild Steel in joist, channel, angle or tee sections, fixed independently without connecting plates, etc., ( cut to ordinary lengths i.e within 20mm of the length indicated of Fe 410-W ( Gde-E-250) quality A complete all as specified and as directed. Note: The ISMB's have to be inserted in wall by replacing damaged existing rafters as in old madras terrace roof including necessary precautionary measures as in supports etc., complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M & L preparation of old wood or wood based materials exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of brick work or stone or boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M& L for brick work with fly ash bricks straight or curved on plain exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1 :4 complete all as specified and as directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 15mm thick on stone surfaces or other than fair face of brick work surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over priming coat on walls complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash on wall surfaces complete all as specified and as directed.

Taking down chowkat with shutter (without taking of shutter from the frame) not exceeding 1.5 sqm each complete all as specified and as directed.

Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullion should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and average width of aperture 1.4mm shall be used for fly proofing 4mm thick plain sheet glass to be used for glazing of glazed shutters including safety grills complete all as specified and as directed. Make NCL Alltech or equivalent as approved by GE.

M&L for preparation of old surfaces of wall and applying three coats of white wash on wall surfaces including taking down existing treatment on walls complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) 1.5 to 4Sqm each complete all as specified and as directed.

S & F second class hard wood plain, solid straight chowkats and frame, wrought, framed rebated on the solid, rounded or chamfered, put together with glue and pinned at joints complete all as specified and as directed.

M&L for treating backs of chowkats etc., area tarred exceeding 0.10sqm but not exceeding 0.50sqm each complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood, glazed and skelton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) complete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S&F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate in repairs complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floor 140mm size complete all as specified and as directed.

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels, commercial type both sides complete all as specified and as directed.

S & F Butt hinges 100 mm MS cold rolled complete all as specified and as directed.

S & F mild steel tower bolts 150 mm long stove enameled black with bright bolt complete all as specified and directed.

S & F MS pressed handles oval type stove enameled black 100mm size complete all as specified and as directed

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

M & L preparation of new painted surfaces and applying two coat of synthetic enamel paint over a coat of primer on wood or wood based material over 10 cm width or girth complete all as specified and as directed.

M & L preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces over 10cm width or girth complete all as specified and as directed.

M&L for preparation of old treated wall surfaces and applying one coat of white wash on wall surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment on walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment on walls and applying two coats of OBD over a coat of wall care putty over a coat of primer complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets or frame work complete all as specified and as directed.

S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised) over the grid providing 4mm thick pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 centimetre thickness (below or above ground level) complete all as specified and as directed

M&L reinforced cement concrete(nominal mix) type B1 1:2:4 (using 20 mm graded stone aggregate) as in RCC bands supported on walls, beams and columns in floors,roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunhings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as specified and as directed.

S&F for mild steel TMT bars 10mm dia and over including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

S&F for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc., including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories concealed duly ISI marked etc., with sunk type pressed steel terminal boxes with suitable size for mounting of piano switches including fixing/grounting sunken as per site requirement suitable for fixing switches/sockets/regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :- (a) One light point/Bell point controlled by one, one way switch 5 amps, SP

(b) One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

Description as per item No. 47 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor complete all as specified and as directed.

S & F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed.

S & F socket outlet flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and as directed.

S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified.

S & F electronic ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks all as specified.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified.

Supply and fix wall mounted LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired box type etc complete with 2 Nos PVC round blocks for mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W including taking down existing unserviceable tube light fitting complete all as specified and as directed. Make : C&S cat No - LTIC00120WLED/WD, Havells cat No-REGALBATTENT8UPTO1X22WSSBSWH incl Tube Rod cat No-PHOTONULTRA2.01213T8SSTL20W LED865SPC, Wipro cat No WI0921208 incl Tube Rod LL13-181-65SE.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Havells cat No ENDURACITYLITEPLATPLUSSL35W LED757SASYBOPC, C&S cat No LTESSI36WLED, Wipro cat No LR13-501-XXX-57.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and as directed.

S & F MCB SPN 240 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and directed.

S & F MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB's complete all as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wire mesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore complete all as specified and as directed in Electrical Plate No.3 of SSR Part I, 2009.

M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metallic rigid PVC conduit surface and conduit accessories of medium grade not less than 25 mm dia including one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed.

S & F in repair wall mounted decorative luminaire suitable for retrofit LED 10 watt including 1x10 watt LED bulb complete all as specified and as directed Make: Havells cat No LHDL06160099/Bajaj/Philips/Wipro.

Supply and fix in replacement recess mounting with perforated sheet with electronic driver luminaire 36 watts LED slim panel (2'x2') with central opal diffuser series mounted in grid ceiling surfaces including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: C&S , Cat No - LTCRSLM36WATT2X2, Havells Cat No - STARTO2X2PLR36WLED857MOD incl driver LED DRIVER36V36WS, Wipro Cat No - CRCO23R036 HP65G3.

Supply and fix vertical type TPN distribution board of 4 way double door with and including incoming MCCB FP 415 volts AC, 3 phase, 50 Hz, 16 KA Breaking Capacity with fixed magnetic setting for current ranging of capacity 100 Amps confirming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated confirming to IS 13032, IS 8623, BS 5486 accommodated suitably in a mild steel enclosure weather proof having hinged and robust locking arrangement complete all as specified and as directed. Make - Havells cat No DHDLVDRWGOFO04 with MCCB IHDA3BBF0100, Standard Cat No - DSDLVDRBAOFO01 & MCCB Cat No - ISLASF0100, C&S Cat No - CSDBMCC B100DD041P43S & MCCB Cat No - CSC3S4100.

Supply and fix Heavy duty Exhaust fan, metal body, 380mm sweep, 1400 RPM 230 volts AC Supply with louvers including opening in wall and fixing arrangement with nut bolts and making good the disturbed surface all as specified and as directed. Make: Havells Cat No- Turbo Force SP equivalent in Bajaj/CG.

Supply and fix in replacement of Aluminium housing, Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit 10Watt LED luminaries comprising of high brightness LEDs including taking down UNSV fitting all as specified and directed. Make: Havells cat No RUGBYNEONFT10WLED860S SYMTOPC, C&S cat No LTB10LED, Wipro cat No LW07-141-XXX-57-XX.

ASHOK CONSTRUCTION

M/s GM Constructions

K LAKSHMAN SINGH AND CO