PWD road to Nuapali_Road_Clearing of Jungle, Potholes repair,renewal coat of SDBC_0.000 to 0.600

Flank dressing to proper camber etc. Complete and as per direction of Engineer In Charge

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRTandH Specifications for Road and Bridge works 4th Revision .

Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and or compressed air to receive bituminous surface etc. complete and as per direction of Engineer In Charge

Providing and applying Primer Coat with bitumen emulsion SS 1 at the rate of 0.60kg sqm on the prepared treated with primer and cleaned as per technical specification for Road and Bridge works.

Providing and applying Tack coat with bitumen RS 1 using emulsion distrubutor at the rate of 0.2 0.25 kg sqm on prepared bituminous surface properly cleaned with hydraulic broom as per Technical Specification Clause 503.

Labour for laying 20mm thick PMC using 0.27cum of 13.2mm to 5.6mm size hgcb chips and 14.6kg penetration grade of Bitumen for 10sqm including hand packing to proper camber and consolidation with PRR including hire and running charges of PRR,HM Plant,Bitumen boiler and all other TandP articles as per direction of EIC

Poviding and laying semi dense bituminous concete with batch type hot mix lplant using cushed aggegate of specified gading pemixed with bituminous binder of 60 70 penitration gade of bitumen tanspoting yhe hot mix to wok site laying with hydostatic paver finishe with sensor control to the equied gade level and alignment rolling with smooth wheeled vibratory and tandom rolles to achieve the desied compction as per clause 508 of MORD specification for road and bidge wok 4th Revision

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines grades

Providing and filling clean dry sand of approved quality from approved quarry in foundation and plinth in 9" thick layer well watered and rammed incl. cost conveyance royalties and taxes of all materials etc.

Cement Concrete 1:2.5:5 with 12mm size hard granite metal including watering curing and cost of all labour T and P etc complete.