Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.4 L+₹19,764 (0.56%)Rejected-Finance DANGRA TOLI CHOWK PURULIA ROAD RANCHI | RANCHI | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | Blaca Corporations L2 | CHANDRA BROTHERS L1 |
|---|---|---|---|---|---|
| 1.00 | Cost towards lifting of 20 H.P. WPIL LTD V.T. pump set with 6” dia column pipe (Total 50ft) from intake well and lowering the same after repairing with all labour tools and tackles | 2 | Job | 16,500 ₹33,000 | 15,000 ₹30,000 Lowest |
| 1.01 | Cost towards dismanteling of 20 H.P. WPIL make V.T. pump, cleaning and checking, repairing and changing of following parts such as (for each pump)
(a) Pump shaft of S.S materials(25mm dia) as per sample 2 Nos. (b) Impeller intermediate bush of S.S materials as per sample 2 Nos. (c) Impeller Key/collet -2Nos. (d) Line shaft sleeve of size 25mm x 150 mm long S.S materials 5 Nos. (e) Line shaft socket of size 50mmx120mm long of S.S materials 5 Nos. (f) Line shaft of S.S materials (Size 1.5m x 25 mm dia)- 3Nos (g) Cost for making and fiting cast iron spider bearing with rubber cutless bush suitable of 6” dia coloumn pipe 4 Nos. (h) Top shaft of S.S materials of size 25 mm dia as per sample 1 Nos. (i) Check nut with locking arrangement 01 Nos. (j) Neckring bush of G.M -3 Nos.
(k) Coloumn pipe high tension bolt with nut, washer as per sample 40 Nos. (l) Rubber insertion/packing paper as per requirements and testing on load | 2 | Job | 2,60,000 ₹5,20,000 | 1,45,000 ₹2,90,000 Lowest |
| 1.02 | Cost towards overhauling of 20 H.P. sq cage induction motor operated on 415V 3 phase, 50c/s, 1450rpm, dismantling cleaning and heating, varnishing reassembly, testing etc all complete | 1 | Job | 18,700 ₹18,700 | 12,000 ₹12,000 Lowest |
| 1.03 | Cost towards rewinding of 20 H.P. sq cage vertical hallow shaft induction motor operated on 415V, 3 phase, 50hz, 1450 rpm with S/F of super enameled copper wire of suitable gauge, other insulating materials, heating varnishing assembly of the motor and testing on full load(WT of copper wire – 9kg | 1 | Job | 13,200 ₹13,200 Lowest | 36,000 ₹36,000 |
| 1.04 | Cost for repairing of motor control panel and changing of its damaged spare such as MNX-50 contactor-3 nos, C.T. coil – 3 Nos, Voltmeter-1 No, Amp meter- 1 Nos, 63 No MCCB -63 Amp. - 1 Nos. etc all complete and testing on full load | 1 | Job | 1,50,000 ₹1,50,000 Lowest | 1,75,000 ₹1,75,000 |
| 1.05 | Cost for S/F of 40 Watt LED light (1 No each outside & inside of pump house) with bracket and required copper wire. | 2 | Nos | 4,400 ₹8,800 Lowest | 8,200 ₹16,400 |
| 1.06 | Cost for transportation of materials for repairing from p/p to work shop to vice versa. | 1 | Job | 16,500 ₹16,500 | 5,000 ₹5,000 Lowest |
| 1.07 | WTP Phase-I
Supplying all labour tools and tackles for taking out old and damaged C/F pump set with all accessories demolition of foundation for installation of new HSC centrifugal pump sets | 2 | Set | 11,000 ₹22,000 | 9,000 ₹18,000 Lowest |
| 1.08 | Cost towards S.I.T.C of electrically driven horizontal spilt casing C/F pump set make (Kirloskar/WPIL/mathe& Plate/Jyoti) coupled with TEFC Sq. cage induction motor make(Kirloskar/Crompton/Jyoti/ABB) operated on 3 phase , 415 ± 10% volts 50 Hz, 1470 RPM mounted on common fabricated base plate with suitable size of CIDF sluice valve-1 No CIDF NR valve- 1 No, foot valve- 1 No, pressure gauge- 1 No, Tyre coupling – 1No etc all complete
Head-57mtr, Discharge 36m3/hr | 2 | Set | 6,70,000 ₹13,40,000 Lowest | 6,95,000 ₹13,90,000 |
| 1.09 | Supplying all labour tools and tackles for making P.C.C foundation- 1 No of size 4 x 3 x 3’ with all materials such as cement, sand, stone chips, foundation bolt- 6 Nos. etc all complete and plastering and punning over exposed surface for each pump set | 2 | Job | 16,500 ₹33,000 Lowest | 25,000 ₹50,000 |
Tender Value
₹21.1 L
EMD Value
₹42,500
Closing Date
25 May 2026, 4:00 pmClosed
Executive Engineer
O/o E.E.D.W. and S Mech Division Dhanbad
Renovation of Electro Mechanical System at Rural Water Supply Scheme at Mairanwatand under D.W and S Mechanical Division Dhanbad
2026_DWSD_113591_1
DWSD Dhanbad 01-2026-27 (Group-A)
Open Tender
Machineries/ Mechanical Engg Items
Supply
60 days
Dhanbad
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
Yes
₹42,500
Yes
12 Aug 2026
4 May 2026
26 May 2026
4 May 2026
25 May 2026
4 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Cost towards lifting of 20 H.P. WPIL LTD V.T. pump set with 6” dia column pipe (Total 50ft) from intake well and lowering the same after repairing with all labour tools and tackles | |||||
| 1.01 | Cost towards dismanteling of 20 H.P. WPIL make V.T. pump, cleaning and checking, repairing and changing of following parts such as (for each pump)
(a) Pump shaft of S.S materials(25mm dia) as per sample 2 Nos. (b) Impeller intermediate bush of S.S materials as per sample 2 Nos. (c) Impeller Key/collet -2Nos. (d) Line shaft sleeve of size 25mm x 150 mm long S.S materials 5 Nos. (e) Line shaft socket of size 50mmx120mm long of S.S materials 5 Nos. (f) Line shaft of S.S materials (Size 1.5m x 25 mm dia)- 3Nos (g) Cost for making and fiting cast iron spider bearing with rubber cutless bush suitable of 6” dia coloumn pipe 4 Nos. (h) Top shaft of S.S materials of size 25 mm dia as per sample 1 Nos. (i) Check nut with locking arrangement 01 Nos. (j) Neckring bush of G.M -3 Nos.
(k) Coloumn pipe high tension bolt with nut, washer as per sample 40 Nos. (l) Rubber insertion/packing paper as per requirements and testing on load | - | Job | - | - |
| 1.02 | Cost towards overhauling of 20 H.P. sq cage induction motor operated on 415V 3 phase, 50c/s, 1450rpm, dismantling cleaning and heating, varnishing reassembly, testing etc all complete | - | Job | - | - |
| 1.03 | Cost towards rewinding of 20 H.P. sq cage vertical hallow shaft induction motor operated on 415V, 3 phase, 50hz, 1450 rpm with S/F of super enameled copper wire of suitable gauge, other insulating materials, heating varnishing assembly of the motor and testing on full load(WT of copper wire – 9kg | - | Job | - | - |
| 1.04 | Cost for repairing of motor control panel and changing of its damaged spare such as MNX-50 contactor-3 nos, C.T. coil – 3 Nos, Voltmeter-1 No, Amp meter- 1 Nos, 63 No MCCB -63 Amp. - 1 Nos. etc all complete and testing on full load | - | Job | - | - |
| 1.05 | Cost for S/F of 40 Watt LED light (1 No each outside & inside of pump house) with bracket and required copper wire. | - | Nos | - | - |
| 1.06 | Cost for transportation of materials for repairing from p/p to work shop to vice versa. | - | Job | - | - |
| 1.07 | WTP Phase-I
Supplying all labour tools and tackles for taking out old and damaged C/F pump set with all accessories demolition of foundation for installation of new HSC centrifugal pump sets | - | Set | - | - |
| 1.08 | Cost towards S.I.T.C of electrically driven horizontal spilt casing C/F pump set make (Kirloskar/WPIL/mathe& Plate/Jyoti) coupled with TEFC Sq. cage induction motor make(Kirloskar/Crompton/Jyoti/ABB) operated on 3 phase , 415 ± 10% volts 50 Hz, 1470 RPM mounted on common fabricated base plate with suitable size of CIDF sluice valve-1 No CIDF NR valve- 1 No, foot valve- 1 No, pressure gauge- 1 No, Tyre coupling – 1No etc all complete
Head-57mtr, Discharge 36m3/hr | - | Set | - | - |
| 1.09 | Supplying all labour tools and tackles for making P.C.C foundation- 1 No of size 4 x 3 x 3’ with all materials such as cement, sand, stone chips, foundation bolt- 6 Nos. etc all complete and plastering and punning over exposed surface for each pump set | - | Job | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
tenderdocument.pdf
Tender Documents • 0.44 MB
BOQ_153484.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .