BID DOCUMENTS FOR PROPOSED CONSTRUCTION OF DECORATIVE SCULPTURES, SELFIE POINTS, AND TREE PLANTATION WORKS AT VARIOUS LOCATIONS WITHIN THE SANAND NAGARPALIKA AREA, SANAND.

SR. NO. ITEM DESCRIPTION AMOUNT IN RS. AMOUNT IN LAKH

SCHEDULE B-1 PROPOSED SCULPTURE AND SELFIE POINT AT SANAND 1497213.78

TREE PLANTATION AT SANAND VARIOUS LOCATION IN

SCHEDULE B-2 1754375.65

SANAND NAGARNALIKA

Total Amount Rs.:- 3251589.43

Total Amount Rs.:- 3251589.43

Say Amount Rs.:- 3251589.00

I/We am/are willing to carry out the work @ _______% Above / Below___________Percentage (should be writen in figures and

words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. Put to Tender Rs.

Add % Rs. Add % Rs.

Total Rs. Total Rs.

(In Words (In Words

Consulting Civil Engineer Municipal Engineer

Dharmesh Deshani (OPC) PVT.LTD. Sanand nagarpalika

Ahmedabad Sanand

Sanand nagarpalika

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

SCHEME:- SWACHH SHAHAR SUNDAR SHAHAR

BID DOCUMENTS FOR PROPOSED CONSTRUCTION OF DECORATIVE SCULPTURES, SELFIE POINTS, AND TREE PLANTATION WORKS AT VARIOUS

LOCATIONS WITHIN THE SANAND NAGARPALIKA AREA, SANAND.

PROPOSED SCULPTURE AND SELFIE POINT AT SANAND

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking

of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

2.00 foundations etc. in layers not exceeding 20 cm. in depth consolidating each 6.56 CUM 137.47

disposited layer by ramming and watering.

Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

3.00 Machine cut stone aggregate 40mm nominal size ) and curring complete 2.33 CUM 3922.03

including cost of formwork in (a) Foundation and plinth

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of columns and

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

Providing and laying marble stone slab flooring over 20mm (average)base of

cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 -

7.00 coarse sand) laid and jointed with gray cement slurry including rubbing and 16.82 Sqm 2194.76

polishing complete. (A) Marble slab 25mm thick

Providing, Fabricating, Supplying, Transporting and Fixing Decorative Peacock

Sculpture made of high-quality Fiber Reinforced Plastic (FRP) in approved artistic

peacock design, having an overall height of 6.0 to 7.0 feet, complete with

weatherproof, UV-resistant paint finish and protective clear coating. The

sculpture shall be supported on an internal structural framework comprising

125 mm diameter Stainless Steel (SS 304) round pipe of 3 mm thickness,

complete with necessary stiffeners, welding, fabrication and all accessories. The

sculpture shall be mounted on a heavy-duty Mild Steel (MS) base plate of size

450 mm × 450 mm with suitable anchor bolts, nuts, washers and foundation

fixing arrangement. The item includes providing and casting RCC foundation of

suitable size and grade, excavation, PCC, reinforcement (if required), grouting

with non-shrink grout, alignment, erection, transportation, loading, unloading,

testing and commissioning, including all labour, materials, tools, tackles,

scaffolding, consumables and incidentals required for complete installation as

directed by the Engineer-in-Charge. The rate shall include all royalties, leads,

lifts and every incidental required for satisfactory completion of the work.

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

SCHEME:- SWACHH SHAHAR SUNDAR SHAHAR

BID DOCUMENTS FOR PROPOSED CONSTRUCTION OF DECORATIVE SCULPTURES, SELFIE POINTS, AND TREE PLANTATION WORKS AT VARIOUS

LOCATIONS WITHIN THE SANAND NAGARPALIKA AREA, SANAND.

PROPOSED SCULPTURE AND SELFIE POINT AT SANAND

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing, Fabricating, Supplying, Transporting and Fixing Decorative Bird

Sculpture made of high-quality Fiber Reinforced Plastic (FRP) in approved artistic

bird design of approximately 7.0 feet overall height, complete with weather-

resistant, UV-stable paint finish. The sculpture shall be mounted on a heavy-duty

supporting framework fabricated from 1½" × 1½" M.S. Round Pipes of minimum

1.5 mm thickness (approximately 25 Nos.) with M.S. Angle base frame of size

× 40 × 6 mm and approximate base size of 5'-0" × 3'-0". The item shall include

fabrication, cutting, bending, welding, grinding, surface preparation, application

of one coat of zinc/epoxy primer and two coats of approved synthetic

enamel/PU paint to all exposed M.S. members, transportation, loading,

unloading, lifting, erection, alignment and fixing in position with heavy-duty

anchor fasteners. The item shall include all materials, labour, machinery,

scaffolding, tools and tackles, testing, commissioning, welding consumables, and

all incidental works, leads and lifts required for complete installation, complete

in all respects as per the approved drawings, specifications and directions of the

Engineer-in-Charge.

Providing, fabricating, supplying and fixing Wave Shape Stainless Steel (SS)

Railing of overall height varying from 900 mm to 1100 mm, fabricated using

mm dia × 16 Gauge AISI 304 Grade Stainless Steel circular pipe for the

continuous wave-shaped top rail and straight bottom rail, with 16 mm dia ×

Gauge AISI 304 Grade Stainless Steel circular vertical pipes fixed at 75 mm clear

spacing, securely welded to the top and bottom rails by Electric arc welding. The

10.00 work shall include cutting, bending, rolling of wave profile, fabrication, grinding, 12.09 Rmt 6338.76

buffing, polishing to Satin (No. 4 Hairline) or Mirror Finish, providing and fixing

SS base plates of suitable size (minimum 100 × 100 × 6 mm) with SS anchor

fasteners, all necessary fixtures, fittings, transportation, erection in position,

testing and commissioning, complete in all respects as per the approved

drawings and the direction of the Engineer-in-Charge.

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

SCHEME:- SWACHH SHAHAR SUNDAR SHAHAR

BID DOCUMENTS FOR PROPOSED CONSTRUCTION OF DECORATIVE SCULPTURES, SELFIE POINTS, AND TREE PLANTATION WORKS AT VARIOUS

LOCATIONS WITHIN THE SANAND NAGARPALIKA AREA, SANAND.

PROPOSED SCULPTURE AND SELFIE POINT AT SANAND

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing, Fabricating, Supplying, Transporting and Erecting Decorative Butterfly

Wing Sculpture of approved artistic design, overall size approximately 1800 mm

height × 2700 mm width, fabricated from 6 mm to 8 mm thick Mild Steel (MS)

plates with structural framework comprising 25 mm × 25 mm MS square pipes

and 125 mm diameter × 3 mm thick SS 304 Stainless Steel Pipe as the central

supporting member. The sculpture shall be mounted on a 450 mm diameter ×

12 mm thick MS base plate with suitable anchor fasteners, complete with

cutting, bending, welding, grinding, surface preparation, application of one coat

11.00 Red Oxide Primer, one coat Epoxy Primer and two coats weather-resistant PU 1.00 Each 467175.50

Paint with clear protective coat to all MS components. The SS 304 pipe shall be

provided with a satin/mirror finish as approved by the Engineer-in-Charge. The

item shall include all fixtures, fittings, foundation anchoring, loading, unloading,

transportation, erection, labour, tools, tackles, testing and commissioning,

complete in all respects as per the approved drawing and directions of the

Engineer-in-Charge.

Total Amounts Rs.:-

Total Amounts Rs.:-

Consulting Civil Engineer Municipal Engineer

Dharmesh Deshani OPC Pvt Ltd Sanand Nagarpalika

Ahmedabad Sanand

Sanand Nagarpalika

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

SCHEME:- SWACHH SHAHAR SUNDAR SHAHAR

BID DOCUMENTS FOR PROPOSED CONSTRUCTION OF DECORATIVE SCULPTURES, SELFIE POINTS, AND TREE PLANTATION WORKS AT VARIOUS

LOCATIONS WITHIN THE SANAND NAGARPALIKA AREA, SANAND.

TREE PLANTATION AT SANAND VARIOUS LOCATION IN SANAND NAGARNALIKA

Item Description

Sr. NO. Quantity Unit Final Rate Amount

(Tree) Azadirachta indicia(Neem), Erythrina indicia, Delonix regia, Ficus

religiosa(Pipul Tree), Nauclea cadamba(Kaddam), 150- 165cm in big polybag

Tree Platation Digging holes in ordinary soil and refilling the same with the

excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2

parts of stacked volume of earth after reduction by 20% : 1 part of stacked

volume of manure after reduction by 8%) flooding with water, dressing

2.00 43.751 including removal of rubbish and 90.00 Cum 3976.88 surplus earth, if 900.00 Each 43.75

any, with all leads and lifts (cost of manure, sludge or extra good earth if

needed to be paid for separately) Holes 60 cm dia, and 60 cm deep

Complete maintenance of trees, jobs like making of basin at regular interval,

application of fertilizer etc, (excluding the cost of material which shall be

supplied by the department and other T & P material/articles shall be

provided by the contractor) as per direction of officer in charge 2.42.1 Trees

for 250 no/( 3 year Slow & Fast growing group), Including Providing and

3.00 wartering of irrigation water through water tanker of Horticulture features 900.00 Each 1100.00

i.e. lawn, tree, shrubs, hedge/edge, ground cover etc. at the site of work.

Water tanker having 5000 lit. capacity with one labour for watering i/c cost of

water, filling of tanker, wartering at site with all leads and lifts as per direction

of officer-in-charge.

SANAND NAGARPALIKA - SANAND

DISTRICT : AHMEDABAD

SCHEME:- SWACHH SHAHAR SUNDAR SHAHAR

BID DOCUMENTS FOR PROPOSED CONSTRUCTION OF DECORATIVE SCULPTURES, SELFIE POINTS, AND TREE PLANTATION WORKS AT VARIOUS

LOCATIONS WITHIN THE SANAND NAGARPALIKA AREA, SANAND.

TREE PLANTATION AT SANAND VARIOUS LOCATION IN SANAND NAGARNALIKA

Item Description

Sr. NO. Quantity Unit Final Rate Amount

Providing and fixing Tree guard made of MS Tree guard Dia 18 inch, M.S. Ring

Patti size 20 x 3 mm - 3 Nos, Weldmesh Jali - Size :- 60 x 60 mm (Hole) -

Guage - Length :-55 Inch, M.S. Angle - Angle Size :-19 x 2 mm - Length :-

Feet - 3 Nos, Total Weight 7 to 7.5 Kg, Total Height 6 Feet, Color :- GREEN

Logo Painting with labeled "VANIKARAN", "SANAND NAGARPALIKA - SANAND

", "Number of Tree Guard", " SWACHCHHA BHARAT MISSION logo" - Plat Side

4.00 Length 470 mm x Height 150 mm using different colour for background with 900.00 Each 721.00

priming coat, border and Round/Square border on Tree Guard number. The

work includes the cost of all materials, labour, transportation, loading,

unloading, erection with carefully, all taxes etc. completed. The work was

carried out as per specification and directed by Muni. Engineer-in-charge.

Demolition and disposal of unserviceable materials with all lead and lift.(i)

Dismentaling tiled of stone floors laid in mortar including stacking of

6.00 serviceable materilas and disposal of unserviceable materials with all lead and 162.00 Each 47.72

Total Amounts Rs.:-

Total Amounts Rs.:-

Consulting Civil Engineer Municipal Engineer

Dharmesh Deshani OPC Pvt Ltd Sanand Nagarpalika

Ahmedabad Sanand

Sanand Nagarpalika