Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | Divakaran L2 | MANU S S L1 |
|---|---|---|---|---|---|
| 1.00Painting | |||||
| 1.00 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 1,785.34 | sqm | 102.49 ₹1,82,979.91 Lowest | 110.89 ₹1,97,976.8 |
| 1.00 | 13.111.1:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | 927.98 | sqm | 125.9 ₹1,16,832.93 | 99.8 ₹92,612.6 Lowest |
| 1.00 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 166.37 | sqm | 97.65 ₹16,245.84 | 80.18 ₹13,339.39 Lowest |
| 1.00 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 299.71 | sqm | 18.43 ₹5,523.69 | 13.65 ₹4,091.07 Lowest |
| 1.00 | OD306112/2025-2026:Labour engaged for shifting, rearraging the furniture without damage and cleaning the rooms etc based on the direction of site engineer in charge | 8 | no | 973.47 ₹7,787.76 Lowest | 1,279.5 ₹10,236 |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.2 | cum | 8,308.27 ₹18,278.19 | 8,053.17 ₹17,716.97 Lowest |
| 1.01 | 11.20.4:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Ordinary cement without any pigment | 22 | sqm | 1,047.41 ₹23,043.02 | 1,015.07 ₹22,331.54 Lowest |
| 2.00Rack in Additional District court V | |||||
| 2.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 97.92 | kg | 525.98 ₹51,503.96 | 509.24 ₹49,864.78 Lowest |
Tender Value
₹5.9 L
EMD Value
₹14,810
Closing Date
20 Jun 2026, 11:00 amClosed
Assistant Executive Engineer
O/o the Assistant Executive Engineer, PWD Buildings Sub division, PMG, Thiruvananthapuram.
GENERAL-District Court, Vanchiyoor-Painting in the two buildings accommodating Fast Track Courts and Rack in Additional District court V-General Civil Work
2026_PWD_855587_1
PWD/BLDG/TR/2610/2026_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
180 days
Thirunananthapuram
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,310
Yes
₹14,810
Yes
14 Aug 2026
12 Jun 2026
22 Jun 2026
12 Jun 2026
20 Jun 2026
12 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Painting | |||||
| 1.001 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 0.6 | sqm | - | - |
| 1.002 | 13.111.1:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | 0.8 | sqm | - | - |
| 1.003 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 0.2 | sqm | - | - |
| 1.004 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 0.8 | sqm | - | - |
| 1.005 | OD306112/2025-2026:Labour engaged for shifting, rearraging the furniture without damage and cleaning the rooms etc based on the direction of site engineer in charge | - | no | - | - |
| 1.006 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.007 | 11.20.4:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Ordinary cement without any pigment | - | sqm | - | - |
| 2Rack in Additional District court V | |||||
| 2.001 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1445988.xls
BOQ • 0.30 MB
viewsbd.pdf
Tender Documents • 1.64 MB
epayment.pdf
Tender Documents • 0.05 MB
form_of_tender.pdf
Tender Documents • 0.18 MB
PreliminaryAgreement.pdf
Tender Documents • 0.03 MB
declaration.pdf
Tender Documents • 0.00 MB
integrity_pact.pdf
Tender Documents • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .