DEPOSIT-CSME

Amount

WORKING CHARGES

OD143764/2025-2026:Trenching the river bed in liquid mud and ordinary soil for laying HDPE pipe up to a maximum depth of 4.00m below bed level using diving set and air compressor or using any other scientific method, stacking the excavated soil at convenient place and refilling the trenches after laying pipes including labour and hire for diving set, air compressor, country boat and all other appliances and equipment, maintaining the depth of trenches till laying pipes, maintaining the depth of trenches till laying pipes etc.complete

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.7.1:Bailing out water with 5HP engine and pump set including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.

OD132515/2025-2026:Interconnecting the 90mm HDPE pipe line with the existing 300mm CI pumping main with 300x50mm GI saddle, including provision of gate valve, by supplying materials etc. complete as per the direction of department officers

OD134735/2025-2026:Conveying and laying 90mm HDPE pipe in position by plotting the pipe in water, fixing RCC sleeves ( at 5 m interval , of a min. size of 0.35x0.15m)or anchor blocks with bolt and nut or plastic rope as per the direction by using country boat or engine driven boat, aligning the pipe line , lowering the pipe line in position in the stream bed, testing the pipe line to the required test pressure with potable water before back filling and leveling the trenches including the cost of all labour charges, hire for appliances etc. complete.

OD136071/2025-2026:Casting RCC sleeves as per design with CC 1:2:4 using 20mm broken stone for 90mm HDPE pipe including hire for steel form work, plastic rope for tying the sleevs with the pipe, cost and conveyance of all materials, watering, curring etc. complete including the cost of cement and reinforcement .

OD143876/2025-2026:Laying and installation of HDPE- 90 mm Dia, PE-100, (PN-12.5)- IS-14333 pipe by horizontal directional drilling method in all types of soil above/below water table up to 3.5m depth for pumping line including preparing, and setting up the plant and equipment , installing new pipe including all related civil/mechanical works , but excluding cost of pipe , butt and electrofusion coupler jointing and pressure testing charges . Dewatering, drilling, stringing, reaming, pulling back the new pipe on the designed alignment and monitoring by approved guidance system. Wastage of pipes, proper disposal of drilling fluid/bentonite slurry. Proper back filling of pit and holes by approved borrow material as per specification, approved method statement or as directed by Engineer in charge.

OD146084/2025-2026:Jointing 90 mm OD HDPE pipe with electro-fusion welding ( both Butt joint and electrofusion coupler joint )using automatic or semi-automatic electrofusion machines, including all labour charge, hire for appliances etc., complete but excluding cost of pipe and fittings: 90mm Nominal Outside Diameter Pipes.

2.20.1:Open timbering in trenches including strutting and shoring complete ( measurements to be taken of the face area timbered ):Depth not exceeding 1.5 m

100.98.1008:Engaging Coolie.

100.32.3:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 50mm Double Acting Air Valve.

100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.

18.30.1:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:80 mm diameter pipe

100.60.1.2.2:Providing 20mm (3/4 inch) house connection with 20mm (3/4 inch) water meter from existing PVC / HDPE mains up to 110 mm dia., up to a length of 5 m using 25mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers.

COST OF MATERIALS

100.98.174:Supply of HDPE Pipe PE 100 (IS 4984/1995), 12.5kg, 90mm Outer Dia.

100.98.469:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.0, Size 80mm.

100.98.446:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Double Orifice Type DS2, Size 50mm.

100.37.5.2:Fabricating M.S. flanges of diameter 100mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

OD143906/2025-2026:Supply of 90mm HDPE End cap

OD143907/2025-2026:Supply of 90mm HDPE Stub end

OD146107/2025-2026:Supply of 90mm HDPE Electrofusion couplers

A.M UBAIDULLA (BID ID -2411493)

Bidder Name

A.M UBAIDULLA

K K BAKKER