CA No CWE PAL 23 2019 20

Amount

Total Amount of Sch 'A' Part - I (Building Work)

Total Amount of Sch 'A' Part -II (Internal electrification Work )

Total Amount of Sch 'A' Part -III (Internal water supply Work )

Total Amount of Sch 'A' Part -IV (Plumbing work )

Total Amount of Sch 'A' Part -V (Road/Path work )

Total Amount of Sch 'A' Part -VI (Sewage disposal work )

Total Amount of Sch 'A' Part -VII (Area drainage )

Total Amount of Sch 'A' Part - VIII (External water supply Work )

Total Amount of Sch 'A' Part -IX ( External electric supply Work )

Total amount of Sch 'A' Part-X (Site Clearance Work)

SCHEDULE 'A' PART- XI (Misc item of work) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under col of "Pre Priced rate" signifies this fact only.

(INTERNAL ELECTRIFICATION WORK)

LED lamp 15 watts White non dimmable B-22 holder base with polycarbonate body complet all as directed. Make C&S Cat Part No LTHPLED LAMP 9W/B22 or equal in Bajaj/ Philips /Havells as approved.

LED light fitting, single tube, 1 x 20 w LED, T8, 230 V (power factor not less than 0.90), box type, CRCA body, bipin holders connector blocks, etc. Complete with all accessories internally pre-wired, including LED lamp T8 20 W with aluminium heat shrink and connecting up with PVC insulated and sheathed, 1100 volts grade, flexible, multistranded 1.0 sqmm copper conductor three core cable complete all as directed.

Street light fitting 80 watt LED, IP-65 protection, single peice pressure die cast aluminium housing high grade powder coated finish with heat resistant toughened clear glass cover for lamp and control gear compartment with high voltage surge protection device upto 5 KV, prewired including 1.60m long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of FI 40 x 6mm with bolts, nuts and washers and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and directed. Make: Havells cat part no LHETAXU 7PN6J080 or equivalent in Philips/Bajaj.

GI bracket made of 40 mm bore medium grade GI pipe duly bend to required shape lenth of bracket shall be not less than 1.5 m including bracket for fixing on GI pipe Pole with mS flat iron clamps, nuts, bolts and washers complete all as specified.

MCB single pole 240 volts 6-32 Amps including providing thimble for out going cables 50Hz all as specified and directed.

MCB single pole & neutral, 240 volts 63 Amps, 10 Ka including providing thimble for out going cables 50Hz all as specified and directed.

Heavy duty exhaust fans with turbo force, 1400 rpm, single phase, 300 mm sweep AC 50 Hz with all its accessories all as specified and directed. Cat part No Turbo force SP of havells or its equivalent in CG/Khaitan

(Sewage disposal) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under col of "Pre Priced rate" signifies this fact only.

On site conventional type LLDPE tank designated to carry sewage and sullage water, including excavation in any type of Soil, PCC 1:4:8 below foundation, vent shaft, connection etc, complete for 30 users.

(Solar water heating) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under col of "Pre Priced rate" signifies this fact only.

Supply, installation testing and commissining of Solar water heating system, Flat plate collector with MS stand and heat exchanger based on indirect transfer of heat of 1000 ltr per day capacity with electrical back up including stainless steel horizontal hot water tank with MS stand and 3x3 KW electrical heaters with 3 phase vermin proof control panel including inlet and outlet valve, temp guage for hot water, gun metal strainer for cold water and water meter complete all as directed by Engr In Charge including following specificatios:-Make :- Suryashakti/TATA BP/Racold (i) Capacity of makeup tank solar water heating system with heat exchanger only - 10 ltrs (ii) Type of cover plate confirming to IS 12933/2003 - Toughned glass with thickness not less than 4mm (iii) Solar transmittance for cover plate at normal incidence - 92% (iv) Material for collector box - Aluminium (v) Number of collector - 10 Nos (vi) Number of absorber sheets per collector - 10 Nos (vii) Number of header tubes - 2 Nos (viii) Number of header tubes - 10 Nos (ix) Diameter of header tube - not less than 24.5mm (x) Diameter of riser tube - not less than 11.5mm (xi) thickness of riser tube - not less than 0.56mm (xii) Material of sheet for absorber - copper (xiii) Collector box insulation - back and sides (xiv) Hot water tank insulation density (high density PUF insulation for 32 KG/mtr cube or high density - 40mm (xv) Coating material for hot water tank - Polyster epoxy plus epoxy based paint (xvi) Material for heat exchager - Stainless steel (xvii) Heat transfer rate for heat exchager - not less than 0.24 sq mtr per 100 LPD capacity (xviii) System interconnecting pipe 25mm bore GI pipes (xix) Tank test/system working pressure - 1 bar (xx) Gasket for flanges - Synthetic gasket used between flanges

Sub total of Schedule 'A' Part-XI

M/S KIRAN CONSTRUCTIONS