REPAIR/MAINT OF WATER SUPPLY DISTRIBUTION SYSTEM AT OLD BS MARG, NEW BS MARG, PREM NAGAR, ROBERT LINE, 4 RAJPUT, 7 MANDI, 41 INF BDE CAMP, CAMBELL LINE, 25 WEU IN THE AREA OF AGE E/M EXT (WS) UNDER GE E/M LUCKNOW

Amount

Excavation in trenches n.exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for laying / taking out water supply pipe line in soft/loose soil, taking out excavated material,forming bottom etc complete all as specified and directed.

Returning filling in including,spreading ,levelling watering and well ramming in layer in n.exc 25 cm in soft/lose soil complete all as specified and directed.

Removing excavated material n.exc 50 mtr and deposting where directed at a level n.exc. 1.5 mtr above starting point as in soft/loose soil complete all as specified and directed.

Cutting of road (in hard/ dense soil ) for laying pipe line or repair to pipes / lead joints etc of any size upto 01 mtr depth, width 0.70 mtr and getting out incluiding forming bottom surface to required level and making good the road as per existing complete all as specified and directed..

Drilling/boaring (horizontally) upto 200 mm bore by penumatic tool or horizontal boaring/drilling machine under the existing road (max. 10 mtr. In width) suitable for passing GI/CI/DI tubing complete all as specified and directed.

Taking down / unserviceable GI Tubing & conection with all fittings laid in trenches/floor/wall of the 20 mm bore sizes complete all as specified and directed (Note - Excavation & earth work shall be measured and paid seperately)

All as per item No 6 above but 25 mm bore.

All as per item No 6 above but 40 mm bore.

All as per item No 6 above but 50 mm bore.

All as per item No 6 above but 80 mm bore.

S&F in repair GI pipe medium grade with all fittings and fixed complete to laid trenches etc of the 20 mm bore sizes, complete all as specified and directed. Make : TATA/Jindal/Prakash (Note - Excavation & earth work shall be measued paid seperately)

All as per item No 11 above but 25mm bore.

All as per item No 11 above but 40mm bore.

All as per item No 11 above but 50mm bore.

All as per item No 11 above but 80mm bore.

Re - laying GI pipe medium grade 20 mm bore with all fittings and fixed complete to laid in wall/ceiling etc. complete all as specified and directed. (Note - Excavation & earth work shall be measued paid seperately)

All as per item No 16 above but 25mm bore.

Cutting in position existing steel tubing for alteration or repair including screwing/threading of the 20 mm bore size complete all as specified and directed.

All as per item No 18 above but 25 mm bore.

All as per item No 18 above but 40 mm bore.

All as per item No 18 above but 50 mm bore.

S&F in replacement gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of the 15 mm bore sizes complete all as specified and directed. (Make : Leader or equivalent make as approved by GE)

All as per item No 22 above but 20 mm bore.

All as per item No 22 above but 25 mm bore.

All as per item No 22 above but 40 mm bore.

All as per item No 22 above but 50 mm bore.

Drilling & Tapping cast iron water mains in postion for branch connection of the 15 mm bore sizes complete all as specified and directed.

All as per item No 27 above but 20 mm bore.

Taking out cst iron water mains 100 mm bore spigot and socket / flanged ends including all fittings like nut bolts washers and rubber gasket complete all as specified and directed.

All as per item No 29 above but 150 mm bore.

Supply & laying of ductile iron water mains with flanged ends, centrifugally cast of class K-9, and wall thickness 6mm of 100 mm bore sizes complete all as specified and directed. (Note- rubber gas kit joints and DI spacials/fitting shall be measured and paid separately)

All as per item No 31 above but 150 mm bore.

M&L in repairs flanged joints complete with rubber or fibre board gasket for new/old pipe lines including nut bolts & washers etc. of the 100 mm bore sizes of water mains/fittings complete all as specified and directed.

All as per item No 33 above but 150 mm bore.

S&F in repairs DI specials 'ISI marked' for pressure water mains up to 150 mm bore spigot and socket Tee,pieces, single or double branch connection or collar etc. compleet all as specified and directed. (Note - Excavation and earth work shall be measured and paid for seperatly).

S&F in repairs DI specials 'ISI marked' for pressure water mains 200 to 300 mm bore spigot and socket Tee,pieces, single or double branch connection or collar etc. compleet all as specified and directed. (Note - Excavation and earth work shall be measured and paid for seperatly).

S&F in repair DI connecting pieces one end flanged and other socket or spigot or bell mouth or any size tapper upto 150 mm bore complete all as specified and directed. (Note - Joints excavation and earth work shall be measured and paid seperatly)

M&L in repair run lead joints for spigot and socket ends for fittings/water mains in repair for new/old pipe lines and fittings of the 100 mm bore size complete all as specified and directed.

All as per item No 38 above but 150 mm bore.

All as per item No 38 above but 200 mm bore.

Cutting in position cast iron water mains for insertion of new tee for branch connection for the 100 mm bore size complete all as specified and directed.

All as per item No 41 above but 150 mm bore.

S&F in repair incluiding taking down sluice valve connection & testing 'ISI marked' both ends flanged and drilled cast iron body class PN-1.6 conforming to IS-14846/2000 complete with stainless steel spindle including necessary nut bolts etc of the 80 mm bore. sizes complete all as specified and directed. NOTE: Joints shall be measured & paid seperately) Make - Kirloskar/Upadhyay.

All as per item No 43 above but 100 mm bore.

All as per item No 43 above but 150 mm bore.

All as per item No 43 above but 200 mm bore.

S&F in replacement Gun metal spindle with qutku "U" thread suitable for any make /model sluice valve of the 250 mm bore sizes complete all as specified and directed.

All as per item No 47 above but 200 mm bore.

All as per item No 47 above but 150 mm bore.

All as per item No 47 above but 100 mm bore.

All as per item No 47 above but 80 mm bore.

M&L in repair Mechanical joints for spigot and socket ends for fittings/water mains in repair for new/old pipe lines and fittings of the 100 mm bore size complete all as specified and directed.

All as per item No 52 above but 150 mm bore

All as per item No 52 above but 200 mm bore

Supply and fixing CI Dead plate ( flanged ) for spigot and socket ends for fittings/water mains in repair for new/old pipe lines and fittings of the 100 mm bore size complete all as specified and directed.

All as per item No 55 above but 150 mm bore

All as per item No 55 above but 200 mm bore

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation of pillar/wall complete all as specified and directed.

M&L for repair/repalcement of valve pit masonery chamber of size 650x650x650 mm (internal dimension) using PCC 1:4:8 type D-2 (using 40mm grade stone aggreagte) for foundation 15 cm thick rendering all around the fly ash brick work with 1:6 thick cement mortar PCC 1:2:4 type B1 (using 20mm graded stone aggreagate) as in coping with for grouting made out of 40x40x5 mm thick angle iron including painting of steel surface with two coat of synthetic enamel paint over a coat of red oxide primers finishing coat, inclduing 4 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement inclduing necessary excavation in any type of soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtr complete all as specified and directed.

All as per item No 59 above but internal diamension 1000x1000x1000 mm.

All as per item No 59 above but internal diamension 1200x1200x1000 mm.

M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping in supporting pillar for pipe wall etc wall complete all as specified and directed.

M&L fly ash bricks, old size as per IS 1489 (Part I)-2002 buit in CM 1:6 straight or curved on plan exc. 6 M mean radius complete all as specified and directed.

M&L rendering 10 mm thick with CM 1:6 on fair face of brick or concrete surfaces complete all as specified and directed.

M&L in replacement fabricated MS work as in bands, straps supports or stay for pipe inlcluding bolts if required conforming to Fe-410.0 or Fe-310.0 complete all as specifed and directed.

Surface dressing & Cleaning away all grass vegetation, sapling ,shrubs, brush wood , udergrowth, roots and trees not exceeding 30 cm girt ( measured one meter above ground level) and removing rubbish upto a distance of 50 mtr outsidem theriphery of the area under clearnece except in the case of surface dressing which incldues for all the foregoing except clearing away of trees complete all as specified and directed.

M/s ARPIT ENTERPRISES

M/s Sanjay and Sanjay