Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.2 LAccepted-Finance | L1 | Accepted-Finance Due to lowest. | |
| 2 | L2₹15.3 L+₹7,760 (0.51%)Rejected-Finance | L2 | Rejected-Finance Due to 2nd lowest. | |
| 3 | L3₹15.3 L+₹8,665 (0.57%)Rejected-Finance | L3 | Rejected-Finance Due to 3rd lowest. |
| Sl No | Description | Qty | Unit | SAIBAL SARKAR L1 | RAHUL TRADERS L3 | COMBINE ENTERPRISES L2 |
|---|---|---|---|---|---|---|
| 1.00 | PART-B
Distribution Junction box having size 1000(H) X750(W) X450(D)mm made of 5mm thick CRCA sheet & 3mm thick top rain canopy by proper welded at all edges fixed on 50X50X6mm angle iron frame with hinged & gasketted acess door both (Back & front) two part type.The door has been double handle with necy two nos locking arrangements.it has also been separated into two parts by S& F Hilamp sheet of (10mmThick)inside middle of pillar box(Maintaining 2" gap for all side) .The pillar box has been four legs of 3 ft long of MS angle(50x50x6mm),Provision for proper ventilation system (2 nos in each side ). the FP box will be painted by two coats of synthetic enamel aluminium paint (both inside & out side)over R.O primer after preparation the MS surface . The FP box will be installed by grouting the legs with sole plate below 2ft the ground level & 1ft aboveground level by CC mixture incl necy brick work. Both below & above ground level with net cement plastering at four side of the muffing incl cutting soil & mendinding good the damages . JB must contain the following electrical accessories:- i)S & F415V,315A sheet steel TPN main switch with HRC fuses(Make-L&T/Siemens/havells)-01 no ii)- FP box consisting 415V,415A capacity 4nos Al Bus bar(Size-(4 x 50x5mm & 500mm length)with minimum 4 nos hole in each bar with necy nut bolt washers,porcelin chair , iii)-S & F 415V,250A sheet metal TPN main switch with HRC fuse(Make-L&T/Havells/Siemens)-1 no,iv)S & F 415V,160A sheet metal TPN main switch with HRC fuse(Make-L&T/Havells/Siemens)-3nos v)-S & F LED Indicator Lamp-3 Nos etc. | 1 | Sets | 1,49,000 ₹1,49,000 Lowest | 1,52,190 ₹1,52,190 | 1,49,690 ₹1,49,690 |
| 2.00 | Supply of 4cx 300sq mm PVC insulated 1.1KV grade Al Armoured cable.(Make- Polycab / Mescab) | 195 | RM | 4,800 ₹9,36,000 Lowest | 4,810 ₹9,37,950 | 4,810 ₹9,37,950 |
| 3.00 | Supply of 4cx 185sq mm PVC insulated 1.1KV grade Al Armoured cable.(Make- Polycab / Mescab) | 110 | RM | 2,980 ₹3,27,800 Lowest | 2,990 ₹3,28,900 | 2,990 ₹3,28,900 |
| 4.00 | Laying of one No. cable above 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the
top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed. (F1/1c) | 195 | RM | 235 ₹45,825 Lowest | 240 ₹46,800 | 241 ₹46,995 |
| 5.00 | Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed(F2/1b) | 110 | RM | 215 ₹23,650 Lowest | 220 ₹24,200 | 222 ₹24,420 |
| 6.00 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :upto 4cx300 sqmm(F4/7c) | 2 | Each | 640 ₹1,280 Lowest | 650 ₹1,300 | 700 ₹1,400 |
| 7.00 | for 4 core 185 sq mm(F4/7c) | 8 | Each | 485 ₹3,880 Lowest | 500 ₹4,000 | 500 ₹4,000 |
| 8.00 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing material4core 300 sqmm cable(F5/bXXXiii) | 2 | Sets | 1,100 ₹2,200 Lowest | 1,100 ₹2,200 Lowest | 1,200 ₹2,400 |
| 8.01 | 4 core 185 sq mm(F5/bxxi) | 8 | Sets | 675 ₹5,400 Lowest | 680 ₹5,440 | 700 ₹5,600 |
| 9.00 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required150 mm diaF6/11i) | 72 | Mtrs | 400 ₹28,800 Lowest | 410 ₹29,520 | 420 ₹30,240 |
Tender Value
Refer Docs
EMD Value
₹30,810
Closing Date
17 Jun 2026, 2:00 pmClosed
EE_PED_PWD
RANCHI ROAD, PURULIA
Strengthening of Electrical Power supply to Academic Building III Utility Building Boys Hostel Skill Development Centre at Sidho Kanho Birsha University Purulia in the District of Purulia
2026_WBPWD_5014600_1
WBPWD/EE/PED/NIQ11/2026-2027
Open Tender
ELECTRICAL WORKS ORG
Item Rate
30 days
PURULIA
Please refer Tender documents.
5 documents required · 5 mandatory
₹30,810
29 Jun 2026
27 May 2026
19 Jun 2026
3 Jun 2026
17 Jun 2026
3 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | PART-B
Distribution Junction box having size 1000(H) X750(W) X450(D)mm made of 5mm thick CRCA sheet & 3mm thick top rain canopy by proper welded at all edges fixed on 50X50X6mm angle iron frame with hinged & gasketted acess door both (Back & front) two part type.The door has been double handle with necy two nos locking arrangements.it has also been separated into two parts by S& F Hilamp sheet of (10mmThick)inside middle of pillar box(Maintaining 2" gap for all side) .The pillar box has been four legs of 3 ft long of MS angle(50x50x6mm),Provision for proper ventilation system (2 nos in each side ). the FP box will be painted by two coats of synthetic enamel aluminium paint (both inside & out side)over R.O primer after preparation the MS surface . The FP box will be installed by grouting the legs with sole plate below 2ft the ground level & 1ft aboveground level by CC mixture incl necy brick work. Both below & above ground level with net cement plastering at four side of the muffing incl cutting soil & mendinding good the damages . JB must contain the following electrical accessories:- i)S & F415V,315A sheet steel TPN main switch with HRC fuses(Make-L&T/Siemens/havells)-01 no ii)- FP box consisting 415V,415A capacity 4nos Al Bus bar(Size-(4 x 50x5mm & 500mm length)with minimum 4 nos hole in each bar with necy nut bolt washers,porcelin chair , iii)-S & F 415V,250A sheet metal TPN main switch with HRC fuse(Make-L&T/Havells/Siemens)-1 no,iv)S & F 415V,160A sheet metal TPN main switch with HRC fuse(Make-L&T/Havells/Siemens)-3nos v)-S & F LED Indicator Lamp-3 Nos etc. | 1 | Sets | - | - |
| 2 | Supply of 4cx 300sq mm PVC insulated 1.1KV grade Al Armoured cable.(Make- Polycab / Mescab) | 195 | RM | - | - |
| 3 | Supply of 4cx 185sq mm PVC insulated 1.1KV grade Al Armoured cable.(Make- Polycab / Mescab) | 110 | RM | - | - |
| 4 | Laying of one No. cable above 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the
top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed. (F1/1c) | 195 | RM | - | - |
| 5 | Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed(F2/1b) | 110 | RM | - | - |
| 6 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :upto 4cx300 sqmm(F4/7c) | 2 | Each | - | - |
| 7 | for 4 core 185 sq mm(F4/7c) | 8 | Each | - | - |
| 8 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing material4core 300 sqmm cable(F5/bXXXiii) | 2 | Sets | - | - |
| 8.01 | 4 core 185 sq mm(F5/bxxi) | 8 | Sets | - | - |
| 9 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required150 mm diaF6/11i) | 72 | Mtrs | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.09 MB
2911_ii.pdf
Tender Documents • 0.89 MB
OID.pdf
Other Document • 0.28 MB
BOQ_5082738.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .