Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-AOC | L1 | Accepted-AOC 1ST LOWEST | |
| 2 | Rejected-Technical | - | Rejected-Technical 2ND LOWEST | |
| 3 | Rejected-Technical | - | Rejected-Technical 3RD LOWEST | |
| 4 | Rejected-Technical | - | Rejected-Technical 6TH LOWEST | |
| 5 | Rejected-Technical | - | Rejected-Technical 4TH LOWEST |
| Sl No | Description | Qty | Unit | Chandran M L2 | DAMODARAN.K L3 | DHANESH K T P L6 | HARILAL T V L1 | SOORAJ KUMAR K P L5 | N JANARDHANAN L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00Mini MCF | |||||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.34 | cum | 264.24 ₹88.78 Lowest | 311.57 ₹104.69 | 350 ₹117.6 | 293.1 ₹98.48 | 318.95 ₹107.17 | 352.53 ₹118.45 |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | 0.34 | cum | 6,063.66 ₹2,037.39 Lowest | 6,870.94 ₹2,308.64 | 7,500 ₹2,520 | 6,463.72 ₹2,171.81 | 7,033.83 ₹2,363.37 | 7,033.83 ₹2,363.37 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,041.06 | kg | 159.5 ₹1,66,049.71 | 162.01 ₹1,68,662.78 | 180 ₹1,87,391.52 | 152.41 ₹1,58,668.56 Lowest | 165.85 ₹1,72,660.46 | 165.85 ₹1,72,660.46 |
| 1.00 | 16.71:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge. | 128.8 | sqm | 1,024.73 ₹1,31,985.22 | 1,055.6 ₹1,35,961.28 | 1,200 ₹1,54,560 | 993.04 ₹1,27,903.55 Lowest | 1,080.63 ₹1,39,185.14 | 1,080.63 ₹1,39,185.14 |
| 1.00 | OD37597/2025-2026:Providing and fixing AluZinc profile sheets(size,shape and pitch of corrugation as approved by
Engineer-in charge)0.40mm(+0.05%),thickness. Sheet should have protective guard film of
25microns minimum to avoid scratches during transportation and should be supplied in single
length upto 12metre or asdesiredbyEngineer-in-charge. The sheet shall be fixed using self
drilling/selftapping screws of size(5.5x55mm)with EPDM seal ,complete upto any pitch in
horizontal/vertical orcurvedsurfaces ,excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required. (MOD 12.50 of DSR ) | 81.55 | sqm | 476.59 ₹38,865.91 | 499.72 ₹40,752.17 | 550 ₹44,852.5 | 470.1 ₹38,336.66 Lowest | 511.57 ₹41,718.53 | 511.57 ₹41,718.53 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 177.22 | sqm | 138.6 ₹24,562 | 142.79 ₹25,304.53 | 165 ₹29,240.48 | 134.33 ₹23,805.29 Lowest | 146.18 ₹25,905.29 | 146.13 ₹25,896.43 |
| 1.01 | OD37690/2025-2026:Manufacturing, supplying and fixing signage boards made up of 2 mm thick aluminimum sheet
as approved by Engineer-in-Charge, letters, borders etc. including the cost of painting with two
or more coats of epoxy paint in grey colour on the back side of aluminimum sheet including
appropriate priming coat. The rate includes the cost of rounding off the corners, fixing and
erecting the same in position all complete as per drawings, specification and direction of the
Engineer-in-Charges. (Rectangular area of the sheet only shall be measured for payment ). | 3.78 | sqm | 2,217.6 ₹8,382.53 | 2,271.26 ₹8,585.36 | 2,500 ₹9,450 | 2,136.65 ₹8,076.54 Lowest | 2,325.11 ₹8,788.92 | 2,325.11 ₹8,788.92 |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 350 | per Letter per cm height | 4.95 ₹1,732.5 Lowest | 5.5 ₹1,925 | 7 ₹2,450 | 5.18 ₹1,813 | 5.63 ₹1,970.5 | 5.62 ₹1,967 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) | 19.25 | metre | 436.02 ₹8,393.39 Lowest | 489.41 ₹9,421.14 | 530 ₹10,202.5 | 460.4 ₹8,862.7 | 501.01 ₹9,644.44 | 501 ₹9,644.25 |
Tender Value
₹4.2 L
EMD Value
₹10,588
Closing Date
9 Jul 2025, 6:00 pmClosed
Assistant Engineer
LID EW SECTION ERAMAM KUTTUR
Construction of Mini MCF at Various Ward
2025_LSGD_773335_3
64/25-26
Open Tender
Civil Works - Others
Item Rate
120 days
Eramam Kuttur GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
Yes
₹10,588
Yes
9 Oct 2025
1 Jul 2025
11 Jul 2025
1 Jul 2025
9 Jul 2025
1 Jul 2025
Amount
Mini MCF
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
16.71:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge.
OD37597/2025-2026:Providing and fixing AluZinc profile sheets(size,shape and pitch of corrugation as approved by Engineer-in charge)0.40mm(+0.05%),thickness. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or asdesiredbyEngineer-in-charge. The sheet shall be fixed using self drilling/selftapping screws of size(5.5x55mm)with EPDM seal ,complete upto any pitch in horizontal/vertical orcurvedsurfaces ,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (MOD 12.50 of DSR )
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD37690/2025-2026:Manufacturing, supplying and fixing signage boards made up of 2 mm thick aluminimum sheet as approved by Engineer-in-Charge, letters, borders etc. including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminimum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, fixing and erecting the same in position all complete as per drawings, specification and direction of the Engineer-in-Charges. (Rectangular area of the sheet only shall be measured for payment ).
13.71:Lettering with black Japan pint of approved brand and manufacture
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
Chandran M (BID ID -2243062)
DAMODARAN.K (BID ID -2243931)
N JANARDHANAN (BID ID -2244819)
SOORAJ KUMAR K P (BID ID -2244457)
DHANESH K T P (BID ID -2244835)
Bidder Name
DHANESH K T P
DAMODARAN.K
HARILAL T V
Chandran M
N JANARDHANAN
SOORAJ KUMAR K P
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1263011.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .