Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC 56C 2 BIDHAN NAGAR RD KOL 700067 W B | KOLKATA | KOLKATA | WEST BENGAL | 700067 | L1 | Accepted-AOC Due to lowest. | |
| 2 | L2₹10.0 L+₹22,086.25 (2.27%)Rejected-Finance 0 3 ONKARMAL JATIA ROAD HOWRAH 711103 | HOWRAH | HOWRAH | WEST BENGAL | 711103 | L2 | Rejected-Finance Due to 2nd lowest. | |
| 3 | L3₹10.3 L+₹56,030.25 (5.75%)Rejected-Finance 120 NIMU GOSSAIN LANE KOLKATA 700005 | KOLKATA | KOLKATA | WEST BENGAL | 700005 | L3 | Rejected-Finance Due to 3rd lowest. |
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
18 Apr 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE_PED_PWD
RANCHI ROAD_PURULIA
Different EI Work including New Conceal Wiring and installation of industrial light_fan by laying new cable line ITI_Purulia in the District of Purulia_ Project ID_ ET212251304S000
2022_WBPWD_374699_1
WBPWD/EE/PED/NIQ02 /2022-2023
Open Tender
ELECTRICAL WORKS ORG
Item Rate
42 days
PURULIA
Please refer Tender documents.
4 documents required · 4 mandatory
₹25,000
17 Nov 2022
1 Apr 2022
21 Apr 2022
2 Apr 2022
18 Apr 2022
2 Apr 2022
120 days
Amount
Electrical Installation Sub-Head:-1 (Distribution Wiring) Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] [E-15/5]
Average run 8 mtr [E-15/5(c)]
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish [E-15/4]
On Board [E-15/4(a)]
Sub-Head:-2 ( Computer Point, Power Point) Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-7/26]
Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board andbakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-6/22]
Sub- Head:-3 ( SPN DB, Encloser) Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.[NS]
2+6 way Make:-L&T Enclosure (LTSD08N) [D-10/13]
Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-11/15]
6 way Up to 160A Make:-L&T Enclosure (LTVD06MGN) [D-12/15]
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10/14]
4 way Make:-L&T Enclosure (LTTD04N) [D-11/14]
Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment [D-9/11]
Sub-Head:- 4 (ISO,MCB,MCCB, SFU) Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection [D-8/10]
100 A Make:-L&T [D-8/10]
Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.
40 A DP Make:-L&T [D-5/6]
63 A FP Make:-Legrand [D-5/6]
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection
16 A FP Make:-Legrand [D-6/7]
16 A TP Make:-L&T [D-6/7]
32 A TP Make:-L&T [D-6/7]
32 A SP Make:-L&T [D-6/7]
16 A SP Make:-L&T [D-6/7]
10 A SP Make:-L&T [D-6/7] for Computer Board
6 A SP Make:-L&T [D-6/7] for Switch Board
Supplying and fixing Sheet steel Main Switches on flat iron frame on wall [D-1/1(a)]
240V DP with fuse on L&N 30/32 A Make:-Havells [D-1/1(a)]
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [D-3/4(a)]
32A Make:-L&T [D-3/4(a)]
63A Make:-L&T [D-3/4(a)]
100A Make:-L&T [D-3/4(a)]
S&F 800A ,50KA Thermal Magnetic Draw out type 4 pole ACB (Make:- L&T) [Model:-CN-CS 800S1, Cat No. SL95352] [NS]
Sub-Head:-5 ( Supply of Cable) Supply of following 1.1 Kv grade XLPE insulated Armoured Aluminium cables- [NS ]
2 core 10 sqmm cable
4 core 16 Sqmm
4 core 50Sq mm
Sub-Head:-6 ( Laying of Cable) Laying of one cable upto 150 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand [F-3/4(a)]
Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed [F-2/1(b)]
Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting [F-1/2(c)]
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required [F-6/11]
40 mm dia [F-6/11(c)]
Sub- Head:-7 (Gland, Socket) Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
upto 2 core 10 sqmm [F-4/7(a)]
upto 4 core 16 sqmm [F-4/7(c)]
upto 4 core 50 sqmm [F-4/7(c)]
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
2 core 10 sqmm cable [F-5/8(b)(iii)]
4 core 16 sqmm cable [F-5/8(b)(xii)]
4 core 50 sqmm cable [F-5/8(b)(xvi)]
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-5/9]
1.5sqmm [NS]
2.5sqmm [F-5/9(i)]
4 sqmm [F-5/9(ii)]
Sub-Head:-8 ( Copper Wire, polythine Pipe, inpection box) Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required
3 x 22/0.3 (1.5 sqmm) [E-9/1(b)]
2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC [E-9/1(s)] for Computer and power point
2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [E-9/1(v)] for SPN DB
4 x 56/0.3 (4 sqmm) + 2 x 36/0.3 (2.5 sqmm) ECC [E-9/1(x)] for VTPN to enclouser
Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) [E-2/1]
19mm dia 3mm thick Polythene Pipe [E-2/1(b)]
Sub-Head:-9 ( Supply Light, Fan, Bulb) Supply of 4' 18W T8 LED tube light with complete set (Make:- Philips TMC 501 P 1xT-LED 22W P3241, including Master LED tube 1200 mm 18W 2100 lumen )
Spply of 230 V, AC Ceiling fan complete with blade, canopy, down rod upto 1 ft.1200 mm (48") sweep, ORIENT NEW BREEZE [NS]
Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/16]
Supply of LED street light of following specifications on the roof top -Crompton NEXUS NEO Light, 72 WATT, Model:- LSTP-72-CDL-M [NS ]
Supply of LED street light of following specifications on the roof top -Crompton FREEDOM NEO Light, 45 WATT, Model:- LSTS-45-CDL-M [NS ]
Supply of 10W LED lamp (Make:Crompton/ Philips / Havells ) [NS]
Sub-Head:-10 ( Fixing Tube and Led street light Light,ceiling fan, Exhaust Fan) Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length. [C-2/15]
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [C-3/21(a)]
Fixing only lamp [C-2/11]
Sub-Head:-11 ( Fan Regulator ) Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [E-6/18(a)]
Sub-Head:-12 ( Earthing) Excavation of soil for installation of Earth Electrode and filling & ramming. [G-1/1] @1.75 Cumtr/earth
For Morrum Soil [G-1/1(b)]
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:
By ISI-Medium GI pipe [G-1/2(a)]
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [G-2/4(a)]
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages
Solid GI Wire No. 4 SWG [G-2/5(a)(i)]
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [G-2/4(a)] for DVC building machine earthing
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [G-2/3(a)]
Sub-Head:-13 ( Dismental Charges) Dismental Charges for existing wiring on quarter.
BANERJEE CONCERN
MOON ELECTRICALS
technical_730249.pdf
PDF • 0.68 MB
techsummary_730249.pdf
PDF • 0.74 MB
finance_730249.pdf
PDF • 0.67 MB
BOQ Comparative Chart
xlsx • 0.02 MB
finsummary_730249.pdf
PDF • 0.57 MB
AOC.pdf
PDF • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .