Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.8 LAccepted-AOC | L1 | Accepted-AOC agreement executed | |
| 2 | Rejected-Technical CHATHANNOOR VENDOR S JAYASHANKAR | - | Rejected-Technical L4 | |
| 3 | Rejected-Technical | - | Rejected-Technical L3 | |
| 4 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | Alexander L4 | KRISHNAKUMAR L3 | SANTHOSH S L1 | SACHIN KUMAR V S L2 |
|---|---|---|---|---|---|---|---|
| 1.00Renovation | |||||||
| 1.00 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 0.56 | cum | 1,991.17 ₹1,111.07 | 1,917.07 ₹1,069.73 | 2,100 ₹1,171.8 | 1,828.89 ₹1,020.52 Lowest |
| 1.00 | 50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete | 4.41 | cum | 7,190.67 ₹31,710.85 | 6,923.07 ₹30,530.74 | 7,991 ₹35,240.31 | 6,604.65 ₹29,126.51 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 65.79 | sqm | 345.69 ₹22,742.95 | 332.82 ₹21,896.23 | 400 ₹26,316 | 317.51 ₹20,888.98 Lowest |
| 1.00 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | 116.39 | sqm | 159.42 ₹18,554.89 | 153.49 ₹17,864.7 | 189 ₹21,997.71 | 146.43 ₹17,042.99 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 170.86 | kg | 181.62 ₹31,030.87 | 174.86 ₹29,875.88 | 214 ₹36,563.18 | 166.82 ₹28,502.2 Lowest |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 119.78 | sqm | 787.3 ₹94,302.79 | 758.01 ₹90,794.44 | 868 ₹1,03,969.04 | 723.15 ₹86,618.91 Lowest |
| 1.01 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 65.79 | sqm | 195.64 ₹12,871.16 | 188.35 ₹12,391.55 | 209.26 ₹13,767.22 | 179.69 ₹11,821.81 Lowest |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 141.28 | kg | 546.65 ₹77,230.71 | 526.31 ₹74,357.08 | 610 ₹86,180.8 | 502.1 ₹70,936.69 Lowest |
| 1.01 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 21.35 | sqm | 1,131.46 ₹24,156.67 | 1,089.36 ₹23,257.84 | 1,451 ₹30,978.85 | 1,039.25 ₹22,187.99 Lowest |
Tender Value
₹8.5 L
EMD Value
₹21,183
Closing Date
15 Sept 2025, 6:00 pmClosed
SE, Kollam municipal corporation
SE, Kollam municipal corporation
1382/25-26-Renovation of Eravipuram Homeo Hospital-
2025_LSGD_791872_9
PC4/16546/25
Open Tender
Civil Works - Buildings
Item Rate
120 days
Kollam Municipla Corporation
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,870
Yes
₹21,183
Yes
3 Feb 2026
27 Aug 2025
17 Sept 2025
27 Aug 2025
15 Sept 2025
27 Aug 2025
27 Aug 2025 - 15 Sept 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1306435.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .