Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.7 LAccepted-AOC 695 NEAR ANJALI CLINIC SHIV PALACE SHANTI VIHAR BADAUN ROAD SUBHASH NAGAR BAREILLY 243001 UP | BAREILLY | BAREILLY | UP | 243001 | L1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L2₹39.1 L+₹5.4 L (15.9%)Rejected-Finance C 3 SHAHDANA COLONY BAREILLY 243005 | BAREILLY | BAREILLY | UTTAR PRADESH | 243005 | L2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L3₹39.5 L+₹5.8 L (17.1%)Rejected-Finance | L3 | Rejected-Finance Over all rates are higher than L-1. | |
| 4 | L4₹41.7 L+₹8.0 L (23.8%)Rejected-Finance | L4 | Rejected-Finance Over all rates are higher than L-1. | |
| 5 | L5₹42.0 L+₹8.3 L (24.5%)Rejected-Finance 113 SURESH SHARMA NAGAR NEAR S S V ENTER COLLEGE BAREILLY 243001 | BAREILLY | UTTAR PRADESH | 243001 | L5 | Rejected-Finance Over all rates are higher than L-1. |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
3 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST BAREILLY
GE WEST BAREILLY
REPAIR TO PARAPET /COPING WORK OF ROOFING, REPLACEMENT OF WC, FLUSHING CISTERN, SANITARY WORK AND CERTAIN REPAIR WORK IN ZONE I AND IV OF AOR OF AGE B/R-II UNDER GE (WEST) BAREILLY.
2023_MES_631207_1
8163/C/E8
Open Tender
Civil Works
Item Rate
180 days
GE WEST BAREILLY
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE WEST BAREILLY
₹98,000
Yes
6 Feb 2024
5 Dec 2023
5 Jan 2024
5 Dec 2023
3 Jan 2024
20 Dec 2023
Amount
Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
M & L for providing plain cement concrete type B-0, 1:2:4, (using 12.5 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and fair complete all as specified and directed.
M & L for rendering 12 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and fair including taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
M & L for rendering 5 mm thick cement plaster on ceiling and chajja with cement mortar 1:3 finished even and fair including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and directed.
M & L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper complete all as specified and directed.
M & L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.
M & L for preparation of old decorated surfaces of walls and applying one coat of cement based paint complete all as specified and directed.
M & L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
S & F in repair vitreous china wash down water closet pan (Pedestal pattern) white including fixing bolts and making connection to flushing cistern, flush pipe etc. complete all as specified and directed.
S & F in repairs water closet vitreous china squatting pan ‘Orissa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.
S & F of polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 with and including 32 mm bore PVC flush pipe of suitable length complete all as specified and directed.
S & F in repairs vitreous china counter top coloured wash hand basin, white, oval shaped, nearest size 560 X 400 mm fixed over counter, excluding taps, waste, chain and plug but including brackets, waste pipe, waste coupling, cutting for and pinning in as required complete all as specified and directed.
S & F in repairs vitreous china white wash hand basin, flat back size 550 X 400 mm excluding taps, waste, chain and plug but including brackets, waste pipe, waste coupling, cutting for and pinning in as required complete all as specified and directed.
S & F in repairs of 1 mm thick stainless steel sink with drainage board Kitchen or laboratory type with plug washer and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size of sink 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm complete all as specified and directed.
S & F of 1 mm thick stainless steel sink without drainage board Kitchen or laboratory type with plug washer and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size of sink 495 mm X 420 mm and bowl size 410 mm X 330 mm X 160 mm complete all as specified and directed.
S & F in repairs 32 mm size (Dia of discharge pipe) waste coupling of PTMT half or full threaded (minimum weight 45 gram) complete all as specified and directed.
S & F in repairs PVC waste pipe 25mm dia, length 750mm to 800mm fixed to wste fittingof wash basin including socket suitable for waste fitting complete all as specified and directed.
S & F of 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.
S & F in repairs plate rack made out of 1mm thick stainless steel sheet of size 75cm x 90cm x25 cm with all internal fittings complete all as specified and directed.
S & F in repairs Chromium Plated Toilet Paper Stand complete all as specified and directed.
S & F in repairs Chromium Plated Towel ring complete all as specified and directed.
S & F in repairs Glass Shelf with Chromium Plated brackets complete all as specified and directed.
S & F in repairs 15 mm size bib tap standard of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.
S & F in repairs 15 mm size Pillar tap standard of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.
S & F in repairs 15 mm bore stop valve / angle valve of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.
S & F in repairs stainless steel soap dish complete all as specified and directed.
S & F in repair vitreous china urinals, bowl type (flat back or corner wall type) 465 X 355 X 265 mm white (minimum) with grating and union for discharge pipe but excluding flushing cistern, flush pipe etc. complete all as specified and directed.
S & F of urinal spreader Chromium plated suitable for fixing with 15 mm bore pipe (Minimum weight 60 Grams) complete all as specified and directed.
S & F in repairs 15 mm bore ball valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.
S & F in repairs 15 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including Taking up or down 15 mm bore steel water tubing and connection complete all as specified and directed.
S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including Taking up or down 20 mm bore steel water tubing and connection complete all as specified and directed.
S & F Central hole basin mixer 15mm dia chromium plated complete all as specified and directed.
S & F in repairs 15 mm bore fancy type, chromium plated angle stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs 15 mm size swivel shower rose of PTMT, any colour (minimum weight 40 gram) including 15 mm size, 195 mm long shower arm of PTMT, with bend of 45 degree with flange any colour (minimum weight 40 gram) complete all as specified and directed.
S & F in repairs 15 mm bore brass chromium plated wall mixer for mixing hot and cold water and for fixing of shower arrangement screwed down for iron pipe complete all as specified and directed.
S & F in repairs chromium plated standard quality jet system suitable for European water closet with PVC connection complete all as specified and directed.
S & F in repairs hand shower (health faucet) with 1m PVC tube, wall hook for EWC complete all as specified and directed.
Dismantling of corrugated or semi corrugated asbestos cement sheets in roof covering complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F of 6 mm thick asbestos cement corrugated or semi-corrugated sheets fixed with ‘L’ type or ‘J’ type or cranked hook bolts and washers as in roof covering, walls etc. complete all as specified and directed.
Dismantling of timber fillet, rails, post, rafters, purlins, etc. under 40 Sqcm in section unframed or framed work complete all as specified and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.
S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section), including distance pieces, cleats etc. confirming to Fe-410-S including cutting, welding etc. complete all as specified and directed.
M & L in repair E-board false ceiling consisting of powder coated GI wall angle, main T and Cross T of 25mm x 25mm x 1.40 mm thick grid frame work, joist, angle / Tee as directed and mild steel wire hook not less than 6mm dia with arrangement for adjusting height of ceiling and including provn of 4mm thick E-classic board in pnel of size 600 x 600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of electric fitting carefully complete all as specified and directed.
S & F in repairs 1.50 mm thick green colour fiber sheet having high tensile strength for outdoor wall, light in weight and washable fixed to square tubes or angle iron framing, size of sheet shall be approved by GE complete all as specified and directed.
S & F of mild steel framed work made of mild steel hollow tubular sections for fixing of fibre sheet and the like such as grills, gratings etc. conforming to Fe-290 Grade E-165 complete all as specified and directed.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.
S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded both sides prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both sides prelam PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of both sides prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable side feathered edge beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed.
Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down door or window shutter of any description exc. 1.00 Sqm but not exc. 2.00 Sqm each complete all as specified and directed.
M & L for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S & F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed.
S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.
S & F PVC boards 19/20mm thick any color / prelaminated as in cabinets including shelves and shutters, fixed with screws and adhesive as per direction of engineer in charge and manufacturer instructions including piano hinges, mgnet catcher, handles, etc complete all as specified and directed.
S & F steel windows / ventilators with pressed steel frame (size 95 x 45 x 1.25mm) side hung shutters including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar (open outside) and wire gauged openable shutter without glazing bar (open side) dovetailed or welded complete all as specified and directed. and all as sper TD drg No TD/088 dated 07 Jan 2022. Note (i) Two Shutters i.e, wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling PCC in frame deemed to be included in quoted rates. (iii) MS Grill shall be measured and paid seperately under relevant item of BOQ.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed.
S & F of 100 mm long Stainless steel butt hinges, medium weight cold rolled complete all as specified and directed.
S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F of 150 mm long anodised aluminium handle, cast type complete all as specified and directed.
M & L for repair to steel windows by replacing all old friction hinges with box type hinges, making the windows functional including all necessary welding etc, as required at site complete all as specified and directed.
S & F of 125 mm size mild steel hasp and staple wire type, stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
S & F in repair 20mm dia stainless steel 1.0mm thick fancy type curtin dropery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required including fitting with 80mm long SS screw with 75mm long wooden gitty of appropriate cross section in each and end & intermediate complete all as specified and directed.
S & F in repair 20mm dia mild steel 1.0mm thick fancy type curtin dropery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required including fitting with 80mm long SS screw with 75mm long wooden gitty of appropriate cross section in each and end & intermediate complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S & F in repair 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S & F in repairs 150mm helical coil door spring complete all as specified and directed.
M & L for rubber moulded coloured chequered cement concrete tiles of size 250 X 250 X 22 mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough includindg dismantling of existing floor where required complete all as specified and directed.
M & L for 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and including sand cushioning, filling of joints with sand and dismantling of existing floors complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar complete all as specified and directed.
S & F of 16-18 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S & F 16-18mm thick green marble (of any type) work (table rubbed and polished) in riser & steps, and like jointed in cement slurry and including in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
M & L for glazed ceramic coloured tiles 300 mm X 200 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, including rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and fair, including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for glazed ceramic coloured tiles 350 mm X 250 mm X 7 mm thick or 450 mm X 350 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and fair, including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
All as Srl Item No 90, but as in vertical surfaces including 10 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for vitrified ceramic coloured tiles light shade 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
All as Srl Item No 92, but as in vertical surfaces including 10 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
Repair to aluminium door / window / ventilator / partition wall etc of any size / any number of panels including taking down (if required) & refixing for easy closing / opening / tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts, changing of mortice lock complete all as specified and directed.
Note :- (a) Materials not included in Sch of Credit and debris from the dismantling having lowest value / Nil value shall be the property of department. The same shall be removed / disposed or deposited by the contractor In MES store yard of GE (West) Bareilly as directed for which no additional payment shall be made. The contractor shall be fully responsible to safe guard these materials agaisnt loses / deterioration tc, till the same are deposited by him in MES store yard. (b) The contractor or his authorized representative shall attend office of AGE B/R daily at 0930 hrs on all working days to take orders / instruction regarding the jobs to be done. A proper record of jobs orderedand completed shall be netered in a register duly signed and dated by Engineer in Charge. (c) Penalty shall be imposed on the contractor for not completig the jobs in time bound manner as under:- (i) Not completing the jobs requiring one tradesman within 24 hrs - Rs 300/- per day per job (ii) Not completing the jobs requiring two tradesman within 48 hrs - Rs 300/- per day per job (iii) Not completing the jobs requiring more than two tradesman within 7 days - Rs 1500/- per day per job. (d) The above aspects shall be borne in mind by the tenderer while quoting the rates. The rates quoted by the contractor shall be deemed to be including the above aspects.
hardeep singh enterprises
JAI SRI RAM ASSOCIATE
REHAN CONSTRUCTIONS
M/S Harshri Nath Enterprises
Builders Harpal
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .