Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.2 LAccepted-AOC 37 B SAHEB KRUPA SOC JIVAN CHETAN SCHOOL SAMA ROAD VADODARA GUJARAT PIN 390 008 | VADODARA | GUJARAT | 390008 | L1 | Accepted-AOC VALID AND ADMITTED | |
| 2 | L2₹11.8 L+₹1.0 L (9.32%)Rejected-AOC 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | L2 | Rejected-AOC VALID AND ADMITTED | |
| 3 | L3₹12.8 L+₹1.9 L (18.0%)Rejected-AOC | L3 | Rejected-AOC VALID AND ADMITTED | |
| 4 | L4₹12.8 L+₹2.0 L (18.3%)Rejected-AOC | L4 | Rejected-AOC VALID AND ADMITTED |
Tender Value
₹14.5 L
EMD Value
₹29,000
Closing Date
31 Aug 2020, 6:00 pmClosed
GE Army Baroda
Opp Akashwani, Makarpura road PO-ONGC Baroda-390009
As per BOQ
2020_MES_362571_2
8530
Open Tender
Civil Works
Item Rate
180 days
GE Army Baroda
As per tender documents
5 documents required · 5 mandatory
₹500
Yes
GE Army Baroda
₹29,000
Yes
17 Sept 2020
10 Aug 2020
2 Sept 2020
10 Aug 2020
31 Aug 2020
18 Aug 2020
12 Aug 2020 - 14 Aug 2020
Amount
Taking down defective ceiling fan, exhaust fan and wall mounting fan and air circulator fan of any make type & sweep including checking the serviceabilty of fan in the presence of MES representative and transporting the same to work shop for repairs and rehanging in position after repairs complete. (Note: Supply & fix of spare parts will be measured and paid separately).
Taking down and Opening of ceiling fan, exhaust fan and wall mounting fans and air circulator fans (any type, make & sweep) at location of installtion for servicing work such as cleaning of fan blade and greasing of bearing with approved quality of grease, cleaning of bushes and oiling etc wherever required including checking of serviceablity of condenser ball bearing and bushes. etc including testing and rehanging in same position complete. (Note: Supply & fix of spares & flexible cable shall be measured and paid separately).
S&F in replacement 3 core PVC insulated overall PVC sheathed standed copper conductor cable 0.5sq mm sizes.
S&F in replacement following ball bearings suitable for fan of existing make, type & sweep complete make NBC/SKF/TATA
Ball bearing No 6201
Ball bearing No 6202
Ball bearing No 6203
Ball bearing No 6204
S&F in replacement capacitor electronic type suitable for ceiling fan, exhaust fan and cabin fan of existing make, type & sweep complete of following capacity.
M&L for Rewinding in replacement of electric fan (Any make, type) with existing size of super enameled copper wire as per (IS-13730) of good quality including treating with insulation varnish & heating including providing insulating material such as cotten tapes, insulating paper etc complete for the following size/sweep :-
Ceiling fan of 1200 mm sweep
Ceiling fan of 1400 mm sweep
Exhaust fan of 450 mm sweep
Exhaust fan of 300/350 mm sweep
Exhaust fan up to 250 mm sweep
Wall mounted Cabin fan up to 400 mm sweep
Air Circulating Fan of size 600 mm sweep
M&L for preparing old painted surfaces of ceiling fan of sweep 1200 mm /1400 mm of any make & type and applying one coat of synthetic enamel paint by spray machine, matching to the existing color including writing the MES No complete .
All as per serial item No 07 but exhaust fans of following sizes complete.
225/250/300/350 mm Sweep
450 mm Sweep
S&F in replacement prepainted down rod made out of medium grade MS tubing of size 15 mm bore of following length including cutting drilling, threading, welding etc. complete.
Down rod 300 mm long
Down rod 600 mm long
Down rod 1000 mm long
Supply only in replacement plastic canopy of ceiling fan 1200/1400mm sweep suitable for existing make complete.
S&F in replacement fan prepainted mild steel blade for wall mounted fan/ Air circulator of existing type of 400/600 mm sweep complete.
S&F in replacement in repair MS clamps (Standard size) with rubber reel with MS nut, bolts, check nut & split pin suitable for ceiling fan 1200 mm sweep complate.
S&F in replacement prepainted Aluminium fan blade suitable for ceiling fan of any make of following sizes complete :-
1200 mm sweep
1400 mm sweep
S&F in replacement prepainted Aluminium fan blade suitable for exhaust fan of any make of following sizes complete :_
up to 300 mm sweep.
450 mm sweep.
M&L for cutting of bearing cover housing for fixing & seating of one ball bearing suitable as per existing fan shaft diameter of any type and size of ceiling fan for replacement of bush by means of turning on lathe machine (ball bearing shall be measured & paid separately) complete.
S&F in replacement ceiling fan shaft made out of vanadium steel suitable for 1200 mm sweep ceiling fan complete.
S&F gun metal bush of any size suitable for ceiling fan exhaust fan/pedestal fan/wall mounted fan etc.
S&F in replacement die cast rotor of ceiling fan motor
S&F in replacement die cast stator of ceiling fan motor
S&F blade screw suitable for various sizes/make ceiling fan
S&F ceiling fan 1200 mm sweep including fixing of down rod and connection complete with & including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50 sq mm from ceiling rose/connector to fan complete. Model - Asset 50 of Make : Crompton Greaves or equivalent in Bajaj/Havells/Usha Note: Old UNSV Ceiling fan will be deposited to AGE E/M office through RV.
S&F of Exhaust fan 200 mm sweep, PVC rust proof body & blades, with louvers for protection from birds, 230 Volt AC supply, connecting up including provison of cable from ceiling rose to fan complete. Similar to Model - Brisk air HS 8" of Make : Crompton Greaves or equivalent in BAJAJ/HAVELLS/USHA Note: Old UNSV Exhaust fan will be deposited to AGE E/M office through RV.
Supply, fixing, testing & commissioning of Metal body exhaust fan 225 mm sweep, 230 Volt AC supply (single phase), with louvers and connecting up including provison of PVC insulated overall PVC sheathed copper conductor cable from ceiling rose to fan complete. Similar Model No.Trans air 9" of Make : Crompton or equivalent in Bajaj/Havells/Usha. Note: Old UNSV Exhaust fan will be deposited to AGE E/M office through RV.
Supply, fixing, testing & commissioning of Iron body exhaust fan 300 mm sweep 1400 RPM with minimum airflow/air delivery 1710 Cmh, totally enclosed heavy duty motor, die cast aluminium rotor mounted on double ball bearing, IP-55, polarity-4, 230 Volt AC supply (single phase), rated power input not more that 90watt, with louvers fixed outside bldg for auto opening and closiing and connecting up including provison of PVC insulated overall PVC sheathed copper conductor cable from ceiling rose to fan complete. Make : CG/Bajaj/Havells or equivalent. Similar to Crompton Greaves model No EXHD300-4-1
Supply, fixing, testing & commissioning of exhaust fan 450 mm sweep with minimum airflow/air delivery 1710 Cmh, totally enclosed heavy duty motor, die cast aluminium rotor mounted on double ball bearing, IP-55, polarity-4, 230 Volt AC supply (single phase), rated power input not more that 90watt, with louvers and connecting up including provison of PVC insulated overall PVC sheathed copper conductor cable from ceiling rose to fan. Make : CG/Bajaj/Havells or equivalent. Similar to Crompton Greaves model No EXHD450-4-1, Note: Old UNSV ceiling fans will be deposited to AGE E/M office through RV.
S&F Wall mounted fan 400 mm sweep including fixing and connection complete with & including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50 sq mm from ceiling rose/connector to fan complete. Model - WM Hiflo Wave of Make : Crompton Greaves or equivalent in Bajaj/Havells/Usha. Note: Old UNSV ceiling fans will be deposited to AGE E/M office through RV.
Taking down and refixing storage type water heater (geyser) of following capacity (any type & Make ) from wall by disconnecting the electric connection and water inlet/outlet connection from supply end checking the serviceability of all parts such as inner vessel, rubber gasket non return valve, heating element, thermostat etc. and refixing the same after replacing unserviceable parts and reassembling complete:-. Note for item No 27 : Spare parts required to be replaced against unserviceable parts shall be measured & paid separately.
25/35 Litres capactity
50 litres capacity
Supply only in replacement of heating elements, 1.5 KW 230 volts of existing type& make(Round/triangular) complete.
Supply only in replacement of heating elements, 2 KW of existing type (Round/triangular)complete.
Supply only in replacement of thermostat of existing type & make 15 Amps, 230/250 volts AC ISI marked complete .
Supply only in replacement safety valve as per existing make and type, ISI marked complete.
Supply only in replacement of PVC flexible conneciton pipe with two brass check nuts & two plastic washers complete.
Supply only in replacement of indicator lamp assembly LED type RED/GREEN for geyser complete
S&F for replacement of metal clad box with plug and socket 20 Amps with one MCB SPN of 20 Amps. complete . Havels/C&S/ Indo Asian
S&F in replacement of plate assembly with stainless steel plate and pipes (intel, outlet and vent) and rubber gasket fixed inside the geyser suitable for 25 ltrs capacity geysers as per existing pattern complete.
All as per serial item No 35 above but for 50 ltrs capacity geysers complete
M&L for Painting of geyser with white synthetic enamel paint one coat after preparation of old surfaces by scrapping rust / scales etc as required at site for Geyser 25 ltrs capacity including writing MES No. complete.
M&L for Painting of geyser with white synthetic enamel paint one coat after preparation of old surfaces by scrapping rust / scales etc as required at site for Geyser 50 ltrs capacity including writing MES No. complete
S&F in replacement gun metal non return valve 15 mm dia including making proper connection complete.
S&F in replacement stop valve cast copper alloy, screwed down high pressure screwed both ends for iron pipe of 15 mm bore fancy type chromium plated complete.
Supply only in replacement 3 core PVC insulated overall PVC sheathed standed copper conductor cable 2.5sq mm sizes
Supply only in replacement of heating elements, 2 KW suitable for Model Misty (with base round/trianglualr coil/Spiral type) of Bajaj type complete.
S&F in repairs stainless steel inner tank suitable for 25/35 ltrs capacity water heater.
All as per serial item No 43 above but for 50 ltrs capacity geysers complete.
S&F 25 litre storage water heater, rated power consumption not more than 1500W, current leakage protection device, multi functional safety valve, high precision thermostat control, preset thermal output, high working pressure 0.8MPa ideal for high rise building, vertical mounting, Operating voltage 230 volts including all fittings complete & provision of flexible three core PVC insulated multi-stranded copper conductor cable, similar to Make : HAVELLS cat part No GHWAMGTWH025 Monza DX Racold/Bajaj/Usha. Note : Old unserviceable Geyser shall be deposited to AGE E/M office/store yard through RV.
S&F 50 litre storage water heater, rated power consumption upto 2000W, current leakage protection device, multi functional safety valve, high precision thermostat control, preset thermal output, high working pressure 0.8MPa ideal for high rise building, vertical mounting, Operating voltage 230 volts including all fittings complete & provision of flexible three core PVC insulated multi-stranded copper conductor cable, Make : HAVELLS cat part No HWAMESWH050/Racold/Bajaj/Usha. Note : Old unserviceable Geyser shall be deposited to AGE E/M office/store yard through RV.
S&F in replacement switch piano flush type single pole, one way 6amp, Make: Anchor/SSK/Cona
S&F in replacement electronic type fan rgulator, not less than 100 watt single phase 230V complete. Make: Anchor/SSK/Cona
S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal. Make: Anchor/SSK/Cona
S&F in replacement Modular type switch 1 way 6A, 1module, 230 V,AC 50Hz ISI Marked with valid CML No. complete all as per Make- Legrand/Craptree/Anchor
S&F in replacement Modular type switch 1 way 20A, 1module, 230 V,AC 50Hz ISI Marked with valid CML No. complete all as per Make- Legrand/Craptree/Anchor
S&F in replacement Modular type socket outlet multipurpose having provision for 3 pin 16A and 3 pin 6A, 2 module, 230 V,AC 50Hz ISI Marked with valid CML No. complete all as per Make- Legrand or equivalent in Craptree, or Anchor
S&F in replacement Modular type Fan step regulator electronic type, 230V, 120W - 2 module ISI marked with suitable CML No and connecting upto complete all as per Make- Legrand or equivalent in Craptree or Anchor
S&F in replacement 3 pin Plug top 230V,15/16A ISI marked with suitable CML No and connecting upto complete all as per Make- Anchor or equivalent in SSK or Cona
Badri Electricals
RAJENDRASINH B THAKOR
motwani and associate
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .