Construction Of Hostel at Kachugaon Girls High School, Kokrajhar under Article 275 I of the Constitution of India during the year 2019-20

Amount

EARTHWORK IN EXCAVATION

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level.

(A) Up to a depth of 2.00m below the existing ground level.

(a) In ordinary soil

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.

(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

PRE CONSTRUCTION ANTI - TERMITE TREATMENT

Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

(a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed..

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(I) Using Mixer Machine

(A) In substructure up to plinth level

Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.

N) Without using admixture, plasticiser

b) M20 grade concrete or Prop. 1:1.5:3

(B) In super structure from plinth level up to 1st floor level.

ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.

N) Without using admixture, plasticiser

b) M20 grade concrete or Prop. 1:1.5:3

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.

TIMBER SHUTTERING (FORMWORK)

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.

(a) Using 38mm thick plank

Sides of tie beams, grade beams etc. at or below ground level.

(a) Using 38mm thick plank

Columns, Pillars, Posts & Strut

(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face

(i) Using 38mm thick plank

PLYBOARD SHUTTERING (FORMWORK)

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.

(a) Floors etc. upto 200mm in thickness.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

Providing form work of 12mm thick Plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in-situ reinforced concrete works upto first floor level.

(a) Thickness not exceeding 200mm.

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b).

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.3(a)

MASONARY WORK

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.

(c).Stone soling of thickness 150mm.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.

(I) In Sub-structure upto plinth level including dewatering if necessary

(b) In proportion 1:4.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)

(A) 112mm thick brick wall

(a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level.

CEMENT CONCRETE FLOORING

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed.

(a) 15 mm thick

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.

(a) 15 mm thick

CEMENT PLASTERING

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed.

a) On Single coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed.

a) On Single coat plaster

CHOWKATHS

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

(b) With 1st class timber (Bonsum/ Sundi)

BLOCK BOARD SHUTTERS

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws.

a) Decorative type face panel and block board core.

(ii) 35 mm thick.

GRILL

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.

II Ornamental grill

(c) Fixed to Brickwork/P.C.C/R.C.C.

WINDOWS AND VENTILATORS

Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately).

a)Side hung and Top hung windows and ventilators

iv) 5 mm clear glass

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.

(a)2 Track sliding window

(iv) 5 mm clear glass

(b)3 Track sliding window

(iv) 5 mm clear glass

PLASTER OF PARIS & WALL PUTTY

Providing two coats of J.K Wall Putty ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)

c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

e) Extra over item no. (c) and (d) above for applying one coat of distemper primer/alkali resistant primer over ceiling and on sloping roof.

(n) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with alkali resistant primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and also including preparing the surface even and sand papered smooth.

(ii). Top coat

q) Extra over item no (m), (n) above for distempering with oil bound distemper of approved brand and manufacture on celing and sloping roof.

f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth.

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting.

(b). With ready mixed paint , wood primer (white).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

ALUMINIUM FITTINGS

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )

Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ).

a) Sliding door bolts

i) 300mm x 16mm

b) Tower bolts

iii) 200mm x 12mm

c) Door handles

iii) 150mm

v) Door stopper with rubber stopper

REINFORCEMENT

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level)

b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc.

STEEL RAILING

Providing and fixing stainless steel (Grade 304) railing made hollow tubes , channels , plates etc. Including welding , grinding , buffing , polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i.e. fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc. of required size , on the top of the floor or the side of wiast slab with suitable arrangement as per approval of Engineer in-charge .(For payment only weight of stainless steel member is to be considered . No extra payment for fixing accessories such as nuts , bolts, fasteners etc. will be considered

SANITARY WORKS

INDIAN TYPE WATER CLOSET

Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)

Vitreous water closet squatting pan Indian type W.C Orissa pattern of size 580 x 450 mm

a) White

ii)Hindware make

EUROPEAN TYPE WATER CLOSET

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)

B) Hindware make

a) White

(v) Water closet SLICK "P(Cat.No.20011) (inclusive of seat cover)

PVC FLUSHING CISTERN

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)

i) Parryware make

a) White

(iv) Deluxe Dual Flush (Cat No.C8110)

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.

i) Parryware make

a) White

(ii) Aquaseal (Cat. No.C0508)

WASH BASIN

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)

Wall Hang Basin

(B) Hindware Make

(a) White

(i) Compact 450 x 300 (Cat.No.10004)/Windsor 450 x 320 (Cat No. 10036)

KITCHEN SINK (STAINLESS STEEL)

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately

(A) Parryware Make

(viii) Square Plain Small (Bowl Size - 355 x 355 x 180) Glossy

MIRROR

Providing fitting and fixing Decorative Mirror complete as directed and specified.

(A) Parryware Make

(b) Size 600mm x 450mm

SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.

(i) Jaquar Make

(a) Continental (Cat.No.ACN-1331N)

Providing, fitting and fixing CP towel rail complete as directed and specified

(b) Sona make

(iii) Towel rail Diplomat 600mm long (Cat.No.TR-0605)

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified.

(c) Agmeco Made

(vi) Dolfee (Cat.No.DE-00101)

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified.

(b) Sona

(ii) Rupa 40mm (HT/ FT) (Cat.No.WS-0801)

BIB COCK

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)

(ii) Bibcock long thread

Jaquare make

(iii)2-Way bib cock

STOP COCK

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately)

Lauret Brand

(a)Angular stop-cock with wall flange

PILLAR COCK

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed.

Jaguar make

(b)Long neck with areator

SHOWER

Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately)

Jaquar make

a) Continental

(ii) Shower arm 190mm long heavy casted body with wall flange

Supplying fitting and fixing Telephonic Chrome Plated (C.P.) shower of approved brand as directed and specified. (Pipes will be measured and paid separately)

Essco make

(a) Telephone shower delux with 1m PVC tube and wall hook

INTERAL CONCEALING

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe

(B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure.

b) 20 mm nominal outer dia pipe

WASTE PIPE,RAIN WATER PIPE,WC PIPE

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed

B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe)

x) 110mm diameter

viii) 75mm diameter

OUTSIDE

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed

C) CPVC pipe with CPVC fittings

iii) 25mm diameter

WATER TANK

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes

2000 Lt capacity

(a) Sintex make

VALVE

Supplying and fitting ball valve as specified and directed..

a) 25 mm dia. (gun metal)

TEE, REDUCING TEE, REDUCERS

Providing & fixing composite Internal seal compression fittings as per ASTM F-1282-1995 annexure for water supply e.g. tees, elbows, reducers, connectors, couplers & clamps with jointing, testing complete including cutting & making good etc.

Reducer

e) 3240x Reduced end

Providing & fixing KiTEC make composite Internal seal compression fittings as per ASTM F-1282-1995 annexure for water supply e.g. tees, elbows, reducers, connectors, couplers & clamps with jointing, testing complete including cutting & making good etc.

Female Elbow

iii) 2025 x 25 mm thread

Electricals

Curcuit wiring

Wiring for dwrawing sub-main line with pvc insulated single core unseathed industrial (multistand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel or equivalent make as approved by the deptt.) pvc conduit Berlia/AKG/Presision/Presto Plast/Polycab/MW ao equinalent make as approved by the deptt. including earth continuty in in surface recessed 20 mm dia. 20 mm thick heavy ISI marked IS:9537 part- III rigid pvc conduct wiring system.

With 2x2.5 sq.mm. Mm +earth continuity with 1x1.5 sq.mm. 20 mm dia. Thick/heavey rigid pvc IS:9537 parth-III conduit.

With 2x4 sq.mm. Mm +earth continuity with 1x2.5 sq.mm. 20 mm dia. Thick/heavey rigid pvc IS:9537 parth-III conduit.

With 2x6 sq.mm. Mm +earth continuity with 1x4 sq.mm. 25 mm dia. Thick/heavey rigid pvc IS:9537 parth-III conduit.

With 2x10 sq.mm. Mm +earth continuity with 1x6 sq.mm. 25 mm dia. Thick/heavey rigid pvc IS:9537 parth-III conduit.

Wiring to 5 a pin 6 amps plug point with 1.5 sq.m. p.v.c insulated single core unseathed industrial (multistand) cable FR conforming to IS-694:1990 with flexible ……….. ……..p.v.c. conduit wiring system. When fitted on same board of light and fan.

Wiring to 5 a pin 6 amps plug point with 1.5 sq.m. p.v.c insulated single core unseathed industrial (multistand) cable FR conforming to IS-694:1990 with flexible ……….. ……..continuty with 1.5 sq.mm cable to third pin of the plug socket etc. as required complete.

Short point up to 3.00 metre length.

Madium point up to 6.00 metre length.

Long point up to 10.00 metre length.

Wiring to 5/6 a pin 16 amps plug point with 4 sq.m. p.v.c insulated single core unseathed industrial (multistand) cable to the mark IS-9537 Part-III.......... .... Make as approved by the deptt.

Short point up to 3.00 metre length.

Madium point up to 6.00 metre length.

Long point up to 10.00 metre length.

Wiring light /fan/call bell point with 3x1.5 sq.m. p.v.c insulated single core unseathed industrial (multistand) cable FR conforming to IS-694:1990 with flexible .......... ....equivalent Make as approved by the deptt.cieling rose etc. complete.

Short point up to 3.00 metre length.

Madium point up to 6.00 metre length.

Long point up to 10.00 metre length.

Modular Switch

Supplying including and fixing of following metal boxes for MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (VIVACE), CRAPTREE in surface recessed system complete as per directed of deptt.

1-2 module type metal

3 module type metal

4-5 module type metal

6-8 module type metal

10 module type metal

12-16 module type metal

24 module type metal

Supplying including and fixing of following front flate of suitch colour MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (VIVACE), CRAPTREE complete as per directed of deptt.

1 module

2 module

3 module

4 module

5 module

6 module

8 module

10 module

16 module

24 module

Supplying with fitting fixing of blank plate single in modular switch system MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (VIVACE), CRAPTREE in surface recessed system complete as per directed of deptt.

Supplying with fitting fixing of 100 watt electronic modular fan speed controler 4-steps 2- module type MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (VIVACE), CRAPTREE in surface recessed system complete as per directed of deptt.

Supplying including installation of socket outlet 6/16 Amp 3/5 pin combined shuttered complete MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (VIVACE), CRAPTREE in surface recessed system complete as per directed of deptt.

Supplying including installation of socket outlet 6 Amp 3 pin combined shuttered complete MODEL RANGE, LEGRAND (MYURIUS), ANKCHOR (VIOLA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (ZENCELO), including making necessary connection as per directed of deppartment.

Supplying with fitting fixing of 16 Amp one way modular clip in switch MODEL RANGE, LEGRAND (MYLINC), ANKCHOR (ROMA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (OPAL), PHILIPS including making necessary connection as per directed of deppartment.

Supplying with fitting fixing of 6 Amp one way modular clip in switch MODEL RANGE, LEGRAND (MYLINC), ANKCHOR (ROMA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (OPAL), PHILIPS including making necessary connection as per directed of deppartment.

Supplying with fitting fixing of 20 Amp one way modular clip in switch MODEL RANGE, LEGRAND (MYLINC), ANKCHOR (ROMA), MK (WRAPAROUND / PLUS), ABB (CHEIRON), KOLORS (KREST), SCHEIDER (OPAL), PHILIPS, Havells including making necessary connection as per directed of deppartment.

Supplying with fitting, fixing sheet steel, phosphatised, powder painted dust & vermin proof double door …………. . …..necessary connection as approved specified and directed by the deptt.)

Schneider neo break, C&S Havels…… …as approved by the deptt.

2 Way single door

4 Way single door

Supplying with fitting, fixing sheet steel, phosphatised, powder painted dust & vermin proof double door IP-43 surface mounting SPN MCB DB…………. . …..as approved specified and directed by the deptt.)

ABB, Schneider MG, legrannd, Hager make

4 Way SPN double door

12 Way SPN double door

Supplying with fitting and fixing MCCB incorner and MCB out going sheet steel, phosphatised, powder painted dust & vermin proof double door IP-43 surface mounting vertical TPN MCB DB…………. . …..as approved specified and directed by the deptt.)

ABB, Schneider MG, legrannd, Hager make

4 Way TPN (4+12) double door

8 Way TPN (4+128 double door

Supplying with fitting and fixing single pole 10 KA 240/415V 50Hz MCB of the following capacity complete with …………. . …..as approved specified and directed by the deptt.)

C Series (Schneider MG, legrannd, Hager make)

Supplying with fitting and fixing DB 10 KA 240/415V 50Hz MCB of the following capacity complete with …………. . …..as approved specified and directed by the deptt.)

C Series (Schneider MG, legrannd, Hager make)

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz MCB of the following capacity complete with …………. . …..as approved specified and directed by the deptt.)

100/300mA sensitivity DP RCCB

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 4P MCB without encloser of the following capacity complete with …………. . …..as approved specified and directed by the deptt.)

25 KA 415V 50Hz 4P MCB (Schneider MG, legrannd, Hager make)

Sleek channel type luminuries complete with top cover & decorative dual colour end caps and with electronic ballast with 1x36 watt fluorecent tube (crompton greaves make) Model -DJB 1314LDB50 ………………… …… ……The mother item rate) PHILIS / WIPRO / BAJAJ / Havells / HPL / SOLAR / JAQUAR make.

Supplying including fitting and fixing of following A.C. ceiling fan with all accessories like down rod canopy etc. of following sweeps with making necessary connection as approved by the deptt. As required comlpete and as directed by the deptt. (without regulator).

Primeum model 1200 mm sweeps (OREINT / PSPO / make) Premiun model 1050 / 1200 mm sweeps SS-390 Deco (Havells make).

FIRE-FIGHTING WORKS

Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark. (Extinguisher will be TROLLEY MOUNTED)(6.5 KG)

BRAND : FIRESTOP / FIREND / FIRE SHIELD

Refilling & Servicing of CO2 Type Fire Extinguisher with ISI Mark refill etc. Complete

(A)Deep Tube Well ,Pumps & Sintax

Labour for test boring with 40mm (internal) dia G.I. Pipes inclusing keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the smal tin container (container scaffolding tools etc. will have to be arranged by the contractor at his own cost)

Labour for boring hole for intersting tube well pipes through diifferent soil/rock media inclusing hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fitings complete as directed by the department. ii) Bore hole of 100mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing , conforming to relevent IS codes of pratice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followeed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space betwwen the borehole and assembly pipes completes as directed the department. P.V.C Pipe SUPREME /PRINCE / FUSION /SFMC Brand iv) 90mm diameter

Supplying fitting and fixing suction pipes plaing/bevel ended,conforming to relevent Is codes of pratice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed.

Suplying fitting and fixing brass Tez filter 2.00 meter long

Supplying fitting & fixing check value (non return value) including thread to pipes

iv) 50mm diameter

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained

Flushing, clearing, washing and watering of the tube well

Supply including installation of submersible type of water supply motor pump set with all accessories including panel board on c.c foundation of proch 1:2:4 jammed with M/S nuts and bolts wire rate submissible cable without seuction G.I Type including making necessary connection etc as required

Septic Tank For (50 users)

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars

c) ISI approved Mild steel reinforcement bar(M.S.Bar)

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:3.1.1.2: Sides of tie beams, grade beams etc. at or below ground level.

Providing and laying plain/reinforced cement concrete works cement with coarse sand and 20mm downgraded stone aggregate including dewatering if necessary & curing complete but excluding cost of formwork and reinforcement for reinforced cement concrete work. I) Using mixture machine A) In sub - structure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level

Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed in sub-structure up to plinth level.

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed.

Cement plaster skirting with cement mortar in prop. 1:3(1 cement :3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.

Providing precast R.C.C slab over drain, septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering, curing etc. complete including fixing in position as directed.

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

THUNGRI KHAKLARY