ADDN ALTN IMPROVEMENT TO SNCOS MESS AND ALLIED WORKS AT HQ SAC U UNDER GE AF TRIVANDRUM.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M & L for vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over GI frame work seamless perimeter 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and applying plaster of paris putty of 2 mm thickness over plastered surface of ceiling and applying two or more coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer over a coat of primer, of required shade and colour complete all as specified and directed.

Taking down Chowkhats or frames exc. 1.5 sq. m and n exc 4.0 sqm each (without taking off shutters from the frames) all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutters from the frames) all as specified and directed.

S&F Powder coated Anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section weighing around the opening, all complete as per requirement and direction of Engineer n-charge.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window upto 1.5 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Rate Inclusive of Glass or wire mesh and making good jambs and reveals ) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with aluminium wire staples complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door of size Frame size 125 X 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Make : Rajshree/Magma (SMP Impex)

S & F factory made second class hardwood glazed and skeleton shutters, 35 mm thick, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; fitted to chowkats complete all as specified and directed.Make: Indian wood and wood product Mangalore/Prince Timber or any CAM

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, and also both face is covered with decorative face veneer (2mm thick) with lipping/frame to match complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, ceilings etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Rendering 10mm thick on fair faces of block masonry work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of block masonry work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of Acrylic emulsion distemper on wall over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of weather coat paint (Anti-fungal paint)over a coat of primer complete all as specified.

M&L for 3mm thick wall care putty on wall, surface as even and smooth finish complete all as specified and directed.

S& F power coated anodised aluminium frame partitions of section 50*25*2mm weighing not less than 0.767kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles, hinges anodised aluminium snap beading screws etc complete all as specified and directed. Make: Jindal/Hindal co

M & L for 12 mm thick prelaminated plywood, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work etc complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section and size 150 mm long complete all as specified and directed.

S & F 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm long complete all as specified and directed.

S & F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F floor door stopper of anodised aluminium alloy body and tongue, with hard drawn steel spring, end fitted with rubber bush (folding type), 140mm overall length of cover plate complete all as specified and directed.

S & F butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L one coat of exterior emulsion weather coat paint over the old wall surface including the preparation of the surfaces complete all as specified and directed.

M&L for preparation of old treated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparing old plastered decorated surface of ceiling and applying one coat of white wash on ceiling all as specified and directed

M&L for min 5mm thick WPC wall panelling colour WPC sheet(Natural wooden colour) fixed on wall over Aluminium frame powder coated of box sections 50mm*50mm size at 1.2m c/c on both horizontal and vertical direction Necessary beading shall be provided at locations wherever is required Note : Necessary screws and other small items inclusive of wooden beading, silicon sealant etc for completing the entire work. Make: Rajshree/Magna( SMP Impex)

Supply and laying in trenches, LT underground cable, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross sectional area 16Sqmm, 3 core multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as directed by Engr-in-Charge.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for laying UG cable not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed .

Returning and refilling of excavated soil upto a depth of 30 cm after riddling the excavated soil for cushioning of cable and refilling of trench with normal excavated soil all as specified and directed

Removing excavated material not exc 50m and depositing where as directed at a level not exc 1.5m above the starting point complete all as specified and directed .

M&L for Brick protection to cable with one layers of new bricks laid flat butting to each other using old size sub - class B bricks.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc all as directed.

M&L for point wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through and including non metallic rigid PVC conduit and accessories concealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 2 mm thick modular metal flush box and suitable modular white cover plate with frame etc all as specified and directed.

Ditto…... One light /bell / fan point controlled by one switch/bell push

Ditto…... One light point controlled by two way switch

Ditto…... One switch socket outlet 5 Amps on independent board

All as per item No 42 above but with copper conductor cable FRLSH 2.5 sqmm for one 3 pin socket outlet, 16 Amps concealed in wall/ ceiling and including provision of 2.5 sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board

M&L for sub main wiring with 2 Runs 2.5 Sq mm for phase and neutral and 1 runs of 2.5 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and accessories and concealed in walls / ceiling all as specified including taking down old sub main wiring.

M&L for sub main wiring with 2 Runs 4 Sq mm for phase and neutral and 1 runs of 4 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and accessories and concealed in walls / ceiling all as specified including taking down old sub main wiring.

M&L for sub main wiring with 2 Runs 6 Sq mm for phase and neutral and 1 runs of 6 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and accessories and concealed in walls / ceiling all as specified including taking down old sub main wiring.

M&L for sub main wiring with 4 Runs 10 Sq mm for phase and neutral and 1 runs of 6.0 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit all as specified including taking down old sub main wiring.

Supply and fix Modular switch 1 way 6A 1 module. Make: Grab tree/Legrand/Havells/VISION-Panasonic/or any CAM

Supply and fix Modular socket 6A 2/3 pin combined 2 module Make: Grab tree/Legrand/Havells/VISION-Panasonic/or any CAM

Supply and fix Modular switch 1way 16 A 1 module Make: Grab tree/Legrand/Havells/VISION-Panasonic/or any CAM

Supply and fix Modular socket 6A /16A 2/3 pin combined 2module Make: Grab tree/Legrand/Havells/VISION-Panasonic/or any CAM

Supply and fix modular 2way 6A 1 module Make: Grab tree/Legrand/Havells/VISION-Panasonic/or any CAM

Supply and fix Modular regulator , 120 w - 2 module Make: Grab tree/Legrand/Havells/VISION-Panasonic/or any CAM

S&F in replacement of UNSV tube light fitting of 36/40 W with surface mounting rail for 20 w LED tube with THREE colour CCT bracket complete with accessories internally, pre-wired connecting up with twin core flexible copper conductor cable of suitable size. make CG/Havells/Wipro/Luker/C&S/Phillips or any CAM

S&F in replacement of UNSV tube light fitting of 1 X 11W/2X9 W Sketch fittings with surface mounting LED battern with Nano diffuser technically to ensure minimum loss in light transmitted 10 Watt LED fittings including 10 watt tube rod complete with all accessories internally , pre-wired connecting up with twin core flexible copper conductor cable of suitable size. make CG/Havells/Wipro/Luker/C&S/Phillips or any CAM

S&F Ceiling rose, surface bakelite, 65x50mm, two to three terminals AC,230 V complete all as specified and as directed

Supply and fix only the MCB 230V,50Hz, 'C' curve AC with rapturing capacity 10kA, SP of capacity 5-32 Amp complete all as specified and directed.

Supply and fix only the MCB 230V,50Hz, 'C' curve AC with rapturing capacity 10kA SPN of capacity 40 Amp complete all as specified and directed.

Taking down unserviceable MCB distribution board, S & F Vertical TPN 6 way of any size and capacity double door with suitable busbar of rating 200 Amps including space for fixing of MCCB 100 Amp disconnecting from mains and making good the disturbed surfaces all as directed.

Taking down unserviceable MCB distribution board, S & F SPN 12 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces all as directed.

Taking down unserviceable MCB distribution board, S & F Vertical SPN 6 way of any size and capacity double door with suitable busbar including space for fixing disconnecting from mains and making good the disturbed surfaces all as directed.

Supply and fix only the RCCB 230V,50Hz, 'C' curve AC with rapturing capacity 10kAC DP 40 amps CAP WITH sensitivity 100mA

Supply and fix MCCB 4 Pole 440 volts AC 50 HZ 100 Amps 25KA, adjustable thermal magnetic release

Removing of existing Ceiling fan 1200mm/1400 sweep from position, painting with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, kept in safe custody and refixing after completion of work to position, along with required accessories in new position as directed

M&L for cutting & removing the burnt winding of ceiling fan of 1200/1400 mm sweep and cleaning the slot, rewinding with super enamelled copper wire of suitable size , varnishing heating and insulating and reassembling the spares complete all as specified.

M&L for cutting & removing the burnt winding of Exhaust fan of 300/450 mm sweep and cleaning the slot, rewinding with super enamelled copper wire of suitable size ,varnishing heating and insulating and reassembling the spares complete all as specified.

Supply and Fix of 2’x2’ recessed mounted LED panel light, 36W, 6500K, high performance energy-efficient fixture suitable for Armstrong/Grid false ceiling, made of high-quality materials with uniform glare-free illumination, complete with all accessories including electronic driver, wiring connections, and testing, etc., as required and as directed at site. make CG/Havells/Wipro/Luker/C&S/Phillips/Eveready or any CAM

Earth continuity conductor or main Earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit or pipe or fixed to a poles or any other indicated situation for loop Earthing etc.as required 4 mm dia GI or steel wire complete all as specified and as directed .

S& F LED Building security light fitting 45 watts 230V AC outdoor type with high pressure dia cast aluminium housing and heat resistance complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete all as specified and directed

Disconnecting and taking down the unserviceable Earthing and M & L for Earthing complete with GI earth plate 60x60cm.x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate to a depth not less than 1.5m below ground level, connected to and including GI wire 4mm dia with GI protection pipe 15mm dia light grade connected upto DBs by means of bolts, nuts, check nuts and washers made of copper, galvanized iron pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50m, charcoal, lugs, common salt complete all as specified and as shown on plate No.3 of SSR Part-I

Supply and Fix of Robustao 400mm Snow White Wall Mounting Fan, a reliable and efficient solution for circulating air, featuring a robust construction, 400mm blade size, sleek snow-white finish, operating at 230V with a 5-star energy rating and 6.0 BEE rating, ensuring effective air circulation, energy efficiency, and durable performance.Make: Bajaj/Usha/GM/CG or any CAM

Supply and fixing of 2-in-1 LED strip light kit, 24 W, 6500K (cool white), complete with power adapter (driver), connectors, mounting clips, and required accessories for proper installation on surface or ceiling, including necessary wiring and terminations as required, all complete as directed at site make CG/Havells/Wipro/Luker/C&S/Phillips or any CAM

Supply and fixing of Fantasy LED Bollard (Model: CRLA 11), IP65 rated suitable for landscape lighting, system wattage 18W, with CCT 5700K, including all necessary accessories and mounting arrangements as required, complete in all respects as per manufacturer’s specifications and as directed at site make CG/Havells/Wipro/Luker/C&S/Phillips or any CAM

Supply and fix energy saving rectangular LED flood light fitting 150 Watts, 240 volts AC, cool white colour, CCT 5700°K, CRI>70, THD<10%, system lumens not less than 100lumens/watt with innovative thermal management, available with multiple optics, equipped with IP-66 protection, any other accessories complete all as specified and as directed by Engr-in-Charge. .make CG/Havells/Wipro/Luker/C&S/Phillips or any CAM

Supply and fix up in repairs to LED light fitting, outdoor type IP 65 rated LED 40W, Terrain post top lantern, a weather-proof indirect lighting solution with improved horizontal uniformity, reduced glare, and improved lighting control as specified and directed. make CG/Havells/Wipro/Luker/C&S/Phillips or any CAM

DJ GROUP (BID ID -3482571)

Powertech Engineers (BID ID -3478796)

Ramshree Global Constructions Pvt. Ltd (BID ID -3479026)