SITC of 9 Mtr. Hot Dip galvanised Octagonal type Streetlight Pole with 90 watt LED Lumineries Streetlight fitting, Cetralized Lighting load Energy Saver System Panel & accessories at Dahej-II remaining Area GIDC Ind.Estate.

Name of Work: SITC of 9 Mtr. Hot Dip Galvanised Octagonal type Streetlight Pole with

watt LED Luminaries Streetlight fitting, Centralized Lighting load Energy

Saver System Panel & accessories for Dahej II remaining Area GIDC Ind. Estate

Sr. Description Qty Unit Rate(Rs) Amount(Rs)

1 Supplying and erecting approved 323 Nos 15706.00

make 9 mtr Octagonal pole made

from HR sheet steel. The pole should

be made as per IS. and shall be

coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend

local wind speed with integral

Junction box consist of terminal plate

of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal

and arrangement for cable

termination to be erected on

foundation as per details given by

manufacturer considering site

requirement.9 Mtr. Long 70 mm Top

X 155 mm bottom dia, 4 mm

260mmX260mmX16mm base plate,

4-M24 Bolts and 750mm long J-Bolt.

Approx Pole weight 97 kg

2 Providing M-20 / 1:2:4 cement 323 Nos 1652.36

concrete foundation for above item

No. 1 & 70 % PCC from bottom

including excavation for the pole of

size 60 x 60 x 150 cms. Deep in

below ground level with plinth of

cms x 45 cms(or 45 cms dia x

cms) OR as per OEM approved

Design high upper ground level with

necessary curing and finishing in

approved manner and as per drawing

& including excavation and as per

instruction of Engineer In charge

3 P & F of Heavy Duty Flanged, Double 646 Nos 47.47

Compression type Brass Cable Gland

with rubber ring suitable for 1 x

Core x 16 Sq. MM PVC Insulated Alu.

Armoured cable complete with

outgoing tails, insulating taps etc. -

4 P & F of Solderless Crimping Type 2584 Nos 15.15

Aluminium Lugs (4 Nos. per

termination) conforming to IS suitable

for 1 x 4.0 Core x 16 Sq. MM PVC

Signature of Contractor Executive Engineer (M&E)

Insulated Aluminium Armoured cable

tail complete erected with insulating

materials for each termination.

5 Providing & erecting 240 V MCB 323 Nos 278.76

double pole switch for lighting Load (

B Curve ) having 10 KA breaking

capacity & confirms to IS : 8828 in

existing box having following capacity

( A ) 6 to 32 Amp . Cat.III

6 SITC of funnel type pipe earthing 323 Nos 618.12

having 1.50 Mtr. Long and 25 MM

dia. Medium Class Galvanised iron

pipe with coupling and buch burried in

specially prepared earth pit with salt

& charcoal complete with necessary

double 8 SWG GI earth wire - 0.8 Kg

(2 x 3.5 Mtr. = 7Mtr.) laid upto bolt

fitted in pole for earthing . (Earthing at

each poles) as per drawing - (1 Job

Per St. Light Pole)

7 Providing and erecting Street Light 323 Nos 916.07

pole bracket comprising main B Class

GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class GI

sleeve tubing of approx.

45cms.length and suitable for

mm /80mm / required size of pole top

having sufficient fasteners for fixing

the brackets and having spread of

1.5.mtr. length with 110 deg.with

vertical plane & suitable welded

stays, reducer and with check nuts

complete painted with one coat of

Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint

with following nos of arms.(A)

Decorative Double Arm Bracket

8 Supplying and erecting 90 Watt LED 646 Nos 5976.17

street light fittings with dimmable

drive , High power White LEDs

wattage of 3 Watt and above

assembled on single MCPCB,

efficiency more than 130 lm/w and

corrosion free High pressure die cast

aluminum housing with smooth finish

powder coated and heat sink

extruded aluminum with diffuser and

Polycarbonate optics/ lenses with

company mark/name engraved or

embossed 120 to 300 V, Power

Signature of Contractor Executive Engineer (M&E)

Factor more than 0.95, THD < 10 %,

CCT 5000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficiency ≥130

lumens/watt . LED driver efficiency >

85 %. CREE / OSRAM / PHILIPS

Lumileds / NICHIA / SEOUL/

LG/BridgeLux (U.S.A.) make LED

used for luminaire. (Fittings required

LM-79 & LM-80 certificates)-(A)

Street Light (IP-66), Surge Protection

-4KV and 10 KV non integral, Light

must have 440VAC line supply

protection. It should withstand

hours for 440VAC line supply.(Cat-III)

9 Providing & laying mains with 1.1 kV 9690 Mtr. 77.77

grade FR PVC insulated ISI Marked

Stranded Copper cable having

Conductor 2 Wire 2.5 Sq. MM.,3 core

round PVC sheathed in existing pipe/

in street light pole erected with

Sq. MM. copper conductor FR PVC

insulated stranded wire of green

colour for earth continuity. - (11 Mtr.

per St. Light Fitting x 1 No. St. Light

Fitting = 11 Mtr.)

10 Providing, laying, testing & 11305 Mtr. 153.52

commissioning of 1 x 4.0 Core x

Sq. MM, XLPE (IS: 7098 (i) - 88), ISI

Mark, Armoured, Multistranded,

Aluminium Conductor suitable for

kV grade to be laid 90 Cms under

ground or to be laid on wall with

necessary clamps or in existing cable

trench/ pipe at road crossing or on

floor and making the ground as per

original. - For Streetlight between two

poles & Service Connections.(35 Mtr.

per St. Light Pole)

11 Providing & laying of approved make 10336 Mtr. 62.62

50 MM Nominal OD Doubled Walled

Corrugated Pipes (DWC) of

polyethylene (conforming to IS

- II) with necessary connecting

accessories like coupler, Tee, L -

Bow, etc. of same material at

required depth (90 cms) including

excavation for laying of cable below

ground/ road surface for enclosing

cable and back filling the same to

make ground as per original & as per

instruction of Engineer Incharge - for

Signature of Contractor Executive Engineer (M&E)

Streelight Cable of 1 x 4 core x

Sq. MM and Service cable of 1 x

core x 10 Sq. MM. (35 Mtr Per

Between two Pole)

12 Providing & laying of approved make 969 Mtr. 95.95

90 MM Nominal OD Doubled Walled

Corrugated Pipes (DWC) of

polyethylene (conforming to IS

- II) with necessary connecting

accessories like coupler, Tee, L -

Bow, etc. of same material at

required depth (90 cms) including

excavation for laying of cable below

ground/ road surface for enclosing

cable and back filling the same to

make ground as per original & as per

instruction of Engineer In charge - for

Streetlight Cable of 1 x 4 core x

Sq. MM and Service cable of 1 x

core x 10 Sq. MM. (2.5 Meter per

13 Smart 4G Timer, Supply of lot based 6.00 Nos 100427.33

4G Smart Streetlight Control &

Monitoring System having a Smart

Panel comprising of 3 Phase loT

Streetlight Smart 4G Timer with 16x2

LCD to display RSSI, relay status,

RTC time & diagnostics., Controller

works on 3-phase & also on any

available 1-Phase., Controller with 8-

hour battery backup during external

power failure. External power failure

alert immediately to cloud., 110-630 V

AC @ 50-60 Hz 3 phase operating

range., Standby power consumption

<3W., Smart 4G Timer with RS232

port for DLMS Energy meter., Smart

4G Timer must be compatible with

any make / brand of DLMS (RS232)

Energy Meter., DI: 4 Nos. (3

Contactor/Latch detection, 1 for Door

Sensor.)., DO: 3 Relays for

Independent control each phase (R,

Y. B) with 1 extra spare relay.. Smart

4G Timer with dual SIM functionality

for connectivity backup.. 4G M2M

SIM 3-Year communication included.,

Local configuration via WiFi BLE for

maintenance or during force

majeure., GPS chip inbuilt of Smart

4G Timer for auto location tracking &

Signature of Contractor Executive Engineer (M&E)

astronomic schedule location.,

programmable schedules.,

Astronomic scheduling with monthly

offsets.. Smart 4G Timer has inbuilt

timer stores schedules locally & also

stores schedule execution logs

locally, syncs to cloud whenever

connected to cloud., Auto-scheduler

overrides manual operations.,

Monitoring & alerts for MCB trips.,

Over/under voltage, current,

overload, power factor & short circuit

protections with alerts via Dashboard,

App, SMS, WhatsApp & Email.,

Contactor / Latch chattering

protection & alerts, Smart 4G Timer

with neutral failure protection and

alert., Bulit-in Watchdog for anti-

jamming.. Smart 4G Timer must send

Regular "heartbeat" on software for

CCMS status., Accelerometer for

tamper & panel movement detection

& alerts, Smart 4G Timer must be

tested from an NABL Lab for Surge

Test @ 6 KV (IEC 61000-4-5), ESD

Test @ 4 KV (IEC 61000-4-2), EFT

@ 2 KV (IEC 61000-4-4), Conducted

Emission @ 150 KHz-30 MHz

(CISPR11), Damp Heat Test (40 Deg

C @ 95% RH) 2 cycles of 12+12

hours (IS: 9000 (Part 5/Sec. 2):

latest) with all test passing criteria as

"Temporary degradation or loss of

function or performance which is self-

recoverable"., FOTA functionality

required for upgrades., Smart 4G

Timer sends & stores online/offline

data of controller & load for lamp burn

hours analysis., It stores & syncs

connectivity logs for configuration of

network connections & analytics.,

PANEL & SWITCHGEAR, The panel

includes a Class 1 DLMS energy

meter NABL approved with 1-2

months of stored data of daily. hourly,

monthly, load survey, instantaneous,

events, tamper data & with power

events stored in meter memory for

audit purpose.. Must monitor V. I.

KWH, KVA, PF, KVAH, etc., Panel

made with 2 mm CRCA sheet with

Signature of Contractor Executive Engineer (M&E)

ground mountable stand complete

with gland plate, waterproof glands,

earthing bolt., IP55, weatherproof

panel with RAL7035 powder-

coated.Smart 4G Timer must be fitted

on removable terminal sockets for

easy maintenance., Switchgear

includes 3 Nos. 3 pole Contactor /

Latch having minimum 50 A Load

carrying capacity per phase, all other

switchgear & wires: 40 A load

carrying capacity., 1 Nos. 4P MCB

kA for Incomer & 6 Nos. 1P MCBs

kA for Outgoing.. Phase-Wise Bypass

MCBs required.. 4P RCCB 100 mA.,

door sensor. Also, provide lock & key

facility.. Panel mount outdoor antenna

for GSM, GPS., Canopy design for

draining down water., CCMS SMART

SOFTWARE, OAuth 2.0 APIs for

sending data to Government

clouds/software, etc., CCMS Web

dashboard with secure password &

OTP login., Hosted on trusted cloud,

data security, antivirus & attack

protection., HTTPS,, AES256-bit

encryption., Vulnerability Assessment

and Penetration Testing (VAPT)

certificate for CCMS Software.,

Streetlight management software for

load status, live analytics & reports.,

Energy meter data tables (kW, kWh,

PF, I, V, etc.) available., Utility

monthly bill reconciliation & Class

accuracy reports for billing, energy

monitoring & auditing for streetlight

load., Fault detection., Light fault 99%

analysis on dashboard using energy

monitoring., WhatsApp integration..

Hierarchy-wise reporting & alerts, GIS

mapping of live connected streetlight

control panels, poles & streetlights.,

MQTT protocol., Smartphone app

with local configuration & navigation.,

Monitoring & reporting of lighting

parameters.. Facility for media

attachments for site

photos/videos/work

permits/checklists, etc. per Feeder

Panel for remote verification., Asset

management module for streetlight

Signature of Contractor Executive Engineer (M&E)

infrastructure data.,

Complaint/service task management

with history & escalation must be

available., Android & IOS App for

dashboard analytics, graphs, energy

data, alerts, 3 Years CCMS Web

Software & Cloud Server hosting

subscription included customizable

user-friendly deshboard

14 Providing & erecting Approved make 6 Nos 6173.12

Four pole moulded case circuit

breaker having breaking capacity ICU

of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with

Fixed thermal & magnetic release

suitable to work on A.C. supply

c/s. with all internal connections &

complete erected in existing

G.M.S. housing. (Cat - III) suitable to

work on AC supply with all internal

connection-ICS=100% of ICU only.(1

No. per Distribution Box)

15 Providing and, fixing heavy duty 12 Nos 47.47

flange type brass cable gland with

rubber ring for PVC insulated

armoured cable complete with out

going tails, insulating tape etc for

following size of cables.(d) 4 core

16 SITC of Solderless crimping type 48 Nos 15.15

Aluminium lugs conforming to IS

suitable for cable of following size

evenly crimped with high pressure

tool & connected to switchgear

terminals with brass/cadmium plated

nut bolts in an approved manner. ©

17 Supplying & erecting funnel type 6 Nos 7874.97

earthing having earth plate of

mm x 600 mm x 3.15 mm thk. Copper

earth plate burried in specifically

prepared earth pit 3 mtr. below

ground with 40 Kg. Charcoal and

Kg. salt with alternate layers of

charcoal & salt, 38 mm dia Medium

Class G. I. Pipe with funnel with a

wire mesh for watering & bricks

massanary block, C. I. cover

complete as per para 7.3 of IS :

with necessary length of double

SWG copper earth wire - bolted to the

Signature of Contractor Executive Engineer (M&E)

plate and covered in 38 mm dia. G. I.

pipe - 2.5 mtr. long complete

connected to the nearest switch

gears with end socket as per direction

& duly tested by earth tester

confirming to ISS & as per drawing -

(1 Job per Distribution Box)

18 Drilling the road without breaking the 2000 Mtr. 616.10

road surface(asphalt)for laying of

cable for feeding power supply by

making up to 150mm dia.size of holes

at both ends complete.

19 Making trench in soft soil of suitable 10336 Mtr. 55.55

width of 90 cms deep for laying cable

or locating the fault all over the run

and backfilling the same and making

the surface as normal ground.

20 Making trench in Hard Murrum / Tar 500 Mtr. 74.74

Road of suitable width of 90 cms or

required depth for laying any size of

cable or locating the fault all over the

run and back filling the same and

making the surface as normal ground.

21 Sock proof paint ground to 1.5 Mtr. 323 Ea. 2000

Note: The Unit rates specified for various items to be executed as per Schedule "B" attached with the

Price Bid are excluding GST but inclusive all labours, materials, testing charges, equipment, all

incidental charges involving in the work and as specified in the Mode of measurement & payment

of detailed specifications of items incl. all taxes, royalty, octroi, transportation cost etc. all as

applicable presently as to be enforced for future by any / all including Central/State Government

& Statutory bodies from time to time.

I / We agree to carry out the work at ______________________ % above the estimated tender

rates ___________________________________________ should be written in figures and

I / We agree to carry out the work at ______________________ % below the estimated tender

rates ___________________________________________ should be written in figures and

ESTIMATED AMOUNT ESTIMATED AMOUNT

Put to tender Rs. 1,65,29,987.00 Put to tender Rs.

Signature of Contractor Executive Engineer (M&E)

Rupees in words: ___________ Rupees in words: _________________

1. (*) Please strike out whichever is not applicable. All work shall be carried out as per the

specifications of the GIDC or as directed.

2. All the columns in Schedule should be filled in ink and the total entries in the last column

should be struck by the contractor under his signature.

3. Rate quoted included clearance of site (prior to commencement of work & at, its close) in

all respect & hold good for the work under all conditions, site moisture, weather etc.

4. I/We have read the tender/general specifications/ conditions and I/We agree to follow

same and binding to me/us.

Bidders Signature Executive Engineer (M&E),

Signature of Contractor Executive Engineer (M&E)