CONSTRUCTION OF LADIES GYMNASIUM AT PALAKKAD JILLA PANCHAYATH PROJECT NO 91

Amount

Civil works for vanitha gymnasium

13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

13.111.2 : Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

21.1.1.1 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.2.1 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

od343802/2023_2024 : Engaing Carpenter<br><br>

od343803/2023_2024 : Engaging Black smith

od343804/2023_2024 : Engaging man Coolie

od343805/2023_2024 : Supplying and fixing Peak Deck Fly - Dimensions: Size 1340x1400x1980 mm - Weight Stack 80 Kg - Cast Iron Weight MS Pipe 100 x 40 mm & 50x50 mm With Powder coated with first coat of primer with wit 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost of c concrete foundation and cost and conveyance of all materials labour charges etc. complete.

od343806/2023_2024 : Supplying and fixing Commercial Spin Bike-Commercial Spin Bike-Display Screen, Heavy Duty Flywheel 15 Kg, Maximum User Weight 120kg, Height & Depth Adjustable Saddle,Height Adjustable Handle Bars, Foam Grip Handle With Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343807/2023_2024 : Supplying and fixing Weight Plates - 150 Kgs - Rubber coated steering Plate

od343808/2023_2024 : Supplying and fixing Weight Rack - Dimensions: - Size 2280X645X809 mm MS Pipe 100 X 40 mm & 50X50 mm and With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343809/2023_2024 : Supplying and fixing Dumbbells' Rack - Dimensions: - Size 810x666x1320 mm, MS Pipe100x40mm & 50x50 mm and With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343810/2023_2024 : Supplying and Fixing Bar - Nickel coating,Knurling Rod -Dimensions - 7Ft x 3 Nos x 3 Ft x 2 Nos

od343811/2023_2024 : Supplying and fixing Gym Ball 75 Cm dia and Polypropelean material

od343812/2023_2024 : Supplying and fixing Dumbbells' & Plates - 100 kgs - Rubber coated,Bouncer dumbbell with Knurling rod

od343813/2023_2024 : Supplying and fixing Preacher Crul Bench - Dimensions :- Size 1220x860x940 mm MS Pipe 100 X 40 mm & 50X50 mm With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343814/2023_2024 : Supplying and fixing Adjustable Bench - Dimensions: Size 1360x447x415 mm MS pipe 100 X 40 mm, 50x50 mm With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343815/2023_2024 : Supplying and fixing Flat Bench - Dimensions:Size 1441x647x402 mm MS pipe 50 x 50 mm and With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343817/2023_2024 : Supplying and fixing Ab Board - Dimensions: Size 1575x717x983 mm MS pipe 50 x 50 mm and With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343818/2023_2024 : Supplying and fixing Double Twister - Dimensions: Size 1208x1083x403mm MS pipe 100 x 40mm& 50x50 mm and With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343819/2023_2024 : Supplying and fixing Dipping Leg Raise - Dimensions:Size 1190x1260x2300 mm MS pipe 100 x 40 mm & 50x50 mm and With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343820/2023_2024 : Supplying and fixing Squat Rack - Dimensions Size 1705 x 1630 x 2200 mm MS Pipe,100 x 40 mm and 50 x 50 mm Thickness and With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343821/2023_2024 : Supplying and Fixing Seated Calf - Dimensions: Size 1388x617x942mm MS Pipe 100 x 40 mm& 50x50 mm 2 mm Thickness Powder Coated With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343822/2023_2024 : Supplying and Fixing T-Bar Rowing - Dimensions Size 1806 x 1133 x1204 mm MS Pipe,100 x 40 mm and 50x50 mm Thickness and With 2mm Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343823/2023_2024 : Supplying and fixing Incline Bench Press - Dimensions: Size 1735x1735x1370 mm - MS pipe 100 x 40 mm & 50x50 mm With Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343824/2023_2024 : Supplying ban fixing Bench Press - ( Olimpic ) Dimensions: Size 2065x1720x1355 mm - MS pipe100x40mm &50x50 mm With Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343825/2023_2024 : Supplying and fixing Weighing Mechine - Digital Disply - User weight-120 Kg Capacity

od343826/2023_2024 : Airobic Stepper - Stepper -Heavy duty Holy Propylene material,150 kgs weight capacity - Size 30x 20 x10 Cm diamensions and With Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343827/2023_2024 : Treadmill - Commercial,Indor Purpose User Weight 120 kgs, LCD Disply,2HP AC motor.Assembly area 1900 x 1500 x 800mm Running space belt size 525 x 3200 mm,Maximum user weight 150 kgs,Speed 1 to 16 kms,Features 2 to 3 hours contineous running,Low power consumption and With Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343828/2023_2024 : Supplying and fixing Cable Cross Over - 75 x 75 Kgs -Dimensions: Size 3200x2000x750mm Weight Stack 75Kg Cast Iron Weight MS Pipe 100x50mm & 50x50mm and With Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343829/2023_2024 : Supplying and fixing Lat Pulldown Machine-High-lat with Row 80kgs - High-lat With Row 80 Kgs Dimensions: - Size 1885x1250x2250 mm Weight Stack80 Kg Cast Iron Weight MS Pipe 100 x 40 mm &50x50 mm and With Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear polyster powder with 60-70 Micron thickness powder Coat including cost and conveyance of all materials labour charges etc. complete.

od343831/2023_2024 : Supplying and fixing Hyper Extension - Measurments - 600 x 1200 x 900 mm Frame, 100 x 50 mm MS Pipe Checked Foot Plate - Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear Polyster Powder with 60 to 70 Micron Thickness Powder coat including cost and conveyance of all meterials and labour charges etc.Complete.

od343832/2023_2024 : Supplying and fixing Ab King Pro - Measuments - Supplying and fixing Ab King Pro - Measuments - 650x 250x 200 mm Holding capacity 120 kgs - Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear Polyster Powder with 60 to 70 Micron Thickness Powder coat including cost and conveyance of all meterials and labour charges etc.Complete.

od343833/2023_2024 : Supplying and fixing EFX Gym Equipments - Weight 120 kgs -Measurment - 1800 x 600 x 1800 mm,20 kgs fly wheel,1 Feet Drive wheel,Belt 1270 mm,25mm Block bearing,M/C Weight - 60 kgs - User weight -120 kgs,100 x 500 mm MS Pipe,1.25 inch MS Handle FRP Wheel Cover and Foot Plate Supplying and fixing Hyper Extension - Measurments - 600 x 1200 x 900 mm Frame, 100 x 50 mm MS Pipe Checked Foot Plate - Powder coated with first coat of primer with 40-50 Micron thickness and top coat of clear Polyster Powder with 60 to 70 Micron Thickness Powder coat including cost and conveyance of all meterials and labour charges etc.Complete.

od343834/2023_2024 : Supplying and fixing drinking water storage tank - 5 Litre Capacity.

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.3.3 : Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.25.1 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

10.20 : Providing and fixing bolts including nuts and washers complete.

od344024/2023_2024 : Providing and laying 2 mm thick anti static Poly vinyl flooring of laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete

INAUGURAL BOARD

ELCECTRIFICATION WORKS

SURESH

Metrisei Industrial Solutions LLP

Bidder Name

P V ORGANIC FERTILIZERS, PALAKKAD

SURESH

Metrisei Industrial Solutions LLP