Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹6.9 Cr
EMD Value
₹10.4 L
Closing Date
2 Mar 2026, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Industrial Areas Development Board
Assistant Executive Engineer-Ele
Providing Basic Electrical Infrastructure & LED Street light facilities at Doothanur Kaval Industrial Area, Shatigram Hobli, Hassan Taluk & District.
KIADB/2025-26/EL/WORK_INDENT409
KIADB/2025-26/EL/WORK_INDENT409
Open
Electrical
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2020-21 to 2024-25) Mandating satisfactory completion as a prime contractor for at least One Similar Nature of Electrical work involving such as Providing Power Infrastructure & Street lights facilities, to an extent of not less than 50% of the amount put to tender (i.e., Rs.346.75 lakhs). (Work executed and work done certificates issued under Joint Venture shall not be considered)
Executed in any one financial year, the following minimum quantities of work (Supply & Erection) (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government / Public Sectors/Government Undertaking Organizations. (Quantities executed certificates issued under Joint Venture shall not be considered). (1) 11kV MCVCB panel: 1 No , (2) 8mtr/9mtr long RCC/PSCC pole/ DP Structure: 163 Nos, (3) 11kV 3Cx400sqmm XLPE HTUG cable: 8.112 Km, (4) Compact RMU-1OD/4 way: 5 Unit, (5) Providing Rabbit/Coyote ACSR conductor: 26.696 Km, (6) 11kV/433V 250KVA DTC: 11 No, (7) Providing 1.1kV LTUG cable of 4Cx16sqmm: 4.32 Km, (8) 8mtr long hotdip galvanized octagonal pole: 116 Each, (9) LED streetlight fixture of 120W: 116 Each
Each Tenderer should further demonstrate: Availability by owning at least 50% of the required / specified key and critical equipment for this work. The remaining 50% can be deployed on lease / hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished : (Furnish details of plant / machinery / equipment etc.,) Tenderer shall have own ladder mounted jeep vehicle, excavator & crane (Hydra) 10 Ton Capacity on lease / Hire basis. Tenderer should enclose all relevant documents with technical bids as evidence
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Electrical engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 09 Months
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2020-21 to 2024-25). Achieved in at least two financial years a minimum financial turnover of Rs.1387.00 Lakhs. (Electrical Contract Works Only) (Not less than 2 times the amount put to tender).
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.208.05 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc)
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
List of Financial Resources with Certificates
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
₹5,000
₹10.4 L
17 Feb 2026
17 Feb 2026
3 Mar 2026
20 Feb 2026
20 Feb 2026
Providing Basic Electrical Infrastructure & LED Street light facilities at Doothanur Kaval Industrial Area, Shatigram Hobli, Hassan Taluk & District.
PART - A Station Breaker at Udayapura Substation:
Supply of 11 kV MCVCB, 500 MVA, 25 kA, 1250 A incomer 800 A feeder Feeder Panel with all lead and lifts complete as per specifications and directions...
Supply of Annunciator Panel for the following combinations (for both MCVCB & PCVCB) 1I/c + 4F + 1CB with all lead and lifts complete as per specifications and directions of engineer in charge.
Control Cables:
Supply of 19Core 2.5sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 10Core 2.5Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 4 core 6sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 2 core 6 sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 4core 2.5sqmm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Earthing name plate & DP feeder name plates including printing of letters painting and board for new earthing pits with stack ( 1 DP earthing namke plate & 1 for feeder name plate) with all ...
Supply of Rubber mats 1000mmX2000mmX12mm size tested for 15KV class with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Earth bond 450mm long with all lead and lifts complete as per specifications and directions of engineer in charge.
LABOUR CHARGES:
11KV switch gear erection, allignment and fixing to the foundation, indoor /outdoor 11kv switchgear panel /unit including movement from the point of unloading to the point of erection ...
Erection of control panel, auxiliary panel, carrier cabinet, marshalling bay kiosketc., alignment and fixing properly to foundation base including movement from the point of unloading to the point of ...
Grounding of equipment by providing cast iron pipe of 100mm ID 13mm thickness 2.75Mtr long with two part clamp out of GI flat 50x6mm continuasly welded around the pipe using cast iron welding electrod...
Grounding of equipment with 50x6mm GI flat and connecting to the equipment to the earth mat / ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and ...
Supplying & providing 450 mm dia 450 mm height 1.5 to 2 thick hume pipe collar (non pressure type) for earth pits with all lead and lifts complete as per specifications and directions of engineer in c...
Removing jelly before earth excavtion & & re-spreading jelly for laying back after back filling of soil(since separate labour charge(S) for jelly removing & respreading is not available in SR, labour...
Laying of control cables from rquipment to control panels & end terminals with all lead and lifts complete as per specifications and directions of engineer in charge.
Testing and commisioning Wiring: identification of wires, ferrulings, crimping & termination wiring: identification of wires, testing of realys CTs & PTs & breakers for operation with all lead and lif...
Wiring & assisting in testing & commissioning at 11KV indoor/outdoor switchgear with all lead and lifts complete as per specifications and directions of engineer in charge.
Wiring & assitinig in testing & commissioning at 11Kv annunciation desk for 1 no of switchgear with all lead and lifts complete as per specifications and directions of engineer in charge.
Civil portion: Extension of 11KV switch gear panel bed:
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, ley trench, foundation of bridges such similar w...
Providing and laying in position cement concrete for levelling course for all works in foundation the granite//trap/basalt crushed graded coarse aggregates and fine aggregate as per relevent IS codes ...
Providing and laying in position cement concrete for levelling course for all works in foundation the granite//trap/basalt crushed graded coarse aggregates and fine aggregate as per relevent IS codes ...
Providing and removing centering, shuttering, strutting, propping etc and removal of form work for foundations footings, bases of columns for mass concrete including cost of all materials, labour with...
Providing size stone masonry with hard stone in foundation & plinth with cement mortar 1:6 (1 cement 6 coarse sand) with all lead and lifts complete as per specifications and directions of engineer in...
Fabrication, supply & centering M S angular struss for all spans as per approved designs and drawings providing framed work, including cutting, hoisting, fixing in position and applying a priming coa...
Providing and laying to required line and slope roofing with corrogated asbeestos cement sheet 6mm thicj fixed with galvanized iron J or L hooks botls and nits 8mm dai CI plain and bitumen washers ov...
Providing and fixing structural steel work riveted, bolted or welded in bulk up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of approved...
Refilling available earth around trenches/pipelines cables, in layers not exeeding 20cms in depth compacting each deposited layer by ramming after watering with all lead and lifts complete as per spec...
Supplying and fixing chemical earthing for grounding conduits, IC cutouts & other equipments backfills compound which is non corrosive, thermally conductive potential to permissible limits, superior f...
Supplying and running GI/copper conductor for grounding and ( along with other wires in conduit system of wiring) using necessary suitable size clamps nails guttas/spacers etc., 10SWG wire with all le...
PART-B Providing DP Structure :
Supplying of DP structure using 9 Mtr long RCC poles 145kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge. for Stud
Supply of 11KV 400 amps GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of ‘H’frame for mounting GOS 11KV 400A Double break with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11KV 70/90KN disc insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Guy set complete with No.15 strain insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of spiral earth electrodes with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 KV polymeric pin insulator with GI pins with all lead and lifts complete as per specifications and directions of engineer in charge.
supply of Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PG clamps Coyote conductor with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply and fixing Anti - clambing device 12 Mtrs barbed wire with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply and fixing caution/board with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge.
Labour portion:
Erection of DP structure using 9 Mtr long RCC poles with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of RCC Pole - 8 Mtr Long, 115 Kg W for Stud with all lead and lifts complete as per specifications and directions of engineer in charge.
Fixing Guy set complete with No. 15 strain insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Fixing spiral earth electrodes with all lead and lifts complete as per specifications and directions of engineer in charge.
Fixing of 11 KV 400 A GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge.
Fixing of ‘H’ frame for mounting 11 KV 400A GOS double break with all lead and lifts complete as per specifications and directions of engineer in charge.
Making of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge.
PART-C Providing Spun pole structure:
Supplying of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of Single H Frame without Transformer Seating and Seating angle support cross arm for 11 M Spun Pole for 63/100/250/500kVA (OH Line) - GI with all lead and lifts complete as per specificatio...
Labour portion:
Erection of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Spun Pole Concreting Base Concreting with CC 1:4: 8 Pole base for 11 Mtr Spun Pole (1000x1000x150mm) B) Pole Concreting with CC 1:2:4 (without coping) e) 11 Mtr Spun Pole (1000x1000x2500mm) C) Provi...
Part - D Supplying & Laying of 11KV 3C X 400 sqmm XLPE UG Cable:
Supplying of 11 KV (E) 3 core 400 sqmm XLPE HTUG cable with pressure extruded inner sheath, ROUND WIRE ARMOURED as per IS-7098 (Part - ...
Supplying of HT heat shrinkable 11KV 3 core 400 sqmm XLPE UG Indoor cable termination kit with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of HT heat shrinkable 11KV 3 core 400 sqmm XLPE UG outdoor cable termination kit with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of HT heat shrinkable straight through joint kit for 11KV 3 core 400 sqmm XLPE UG cable with Copper lugs and Aluminium Ferrule with all lead and lifts complete as per specifications and dire...
Supply of artificial manufacture sand for spreading and forming alround the UG cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of cable covering tiles of 250x125x40mm or 125x125x40mm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of 100mm dia GI pipe for drain crossing and cable raising with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying of UG cable by Trench less technology (HDD) by adopting horizontal boring and drawing of cables including preparation at site with all lead and lifts complete as per specifications and directio...
Labour Charges: Cable trench excavation in ordinary soil with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying of high tension 11 KV(E) 3 core 400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers with all lead and lifts complete as per specifications and directions ...
Refilling and consolidation with all lead and lifts complete as per specifications and directions of engineer in charge.
Making and fixing for 11 KV(E) 3 Core 400 sqmm heat shrinkable type cable termination (indoor / out door) with all lead and lifts complete as per specifications and directions of engineer in charge.
Making and fixing for 11 KV (E) 3 core 400 sqmm heat shrinkable type straight through joint with all lead and lifts complete as per specifications and directions of engineer in charge.
Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm with all lead and lifts complete as per specifications and directions of engineer in charge.
Covering the tiles of 250X250X40mm for 3 core 400sqmm XLPE UG cable with all lead and lifts complete as per specifications and directions of engineer in charge.
Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary with all lead and lifts complete ...
Fixing of route and joint indicating stone connected with MS anchor rods with all lead and lifts complete as per specifications and directions of engineer in charge.
Part - E Providing OD's 350MVA, 630Amps:
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 RMU with all lead and lifts complete as per specifications...
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 with all lead and lifts complete as per specifications and directions of engineer in charge.
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
For construction of Foundation : Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...
Supplying & running of GI/Copper strips for grounding connections, using necessary fixing materials as required
with all lead and lifts complete as per specifications and directions of engineer in ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing GI chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts bolts and washers as required complete as per the direction ...
Supplying & fixing M.S rectangular poles made out of 2 equal angles of 65* 65*6 mm welded together & fixed in cc (1:2:4) with 2 nos 16mm dia M.S hold fast rods each of lenth 25 cms, Including cost of...
Supplying of Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants et...
Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....
Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., with all lead and lifts complete as per s...
Part - F Extension of HT/LT lines:
Supply of RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge. for Stud
Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts & washers for RCC pole - 9mtr long 145kg WL with all lead and lifts complete as per specifications and directions of engin...
Supply of LT 4 Pin Cross Arm with clamps, bolts, nuts & washers for RCC pole - 9mtr long 145kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11KV 70/90KN disc insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 kV, 5 kN Polymeric Pin Insulator (24 mm dia FRP Rod) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 1.1 kV Ceramic Pin Insulator with GI pins with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of No. 8 Strain Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Guy Set Complete with No. 15 Strain Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Spiral Earth Electrode with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of ACSR Coyote ACSR with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Rabbit ACSR Conductor with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PG clamp for Coyote conductor with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PG clamp for Rabbit conductor with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of RCC Pole of 9Mtr long with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of RCC Pole - 8 Mtr Long, 115 Kg W for Stud with all lead and lifts complete as per specifications and directions of engineer in charge.
Fixing of Horizontal cross arm and LT 4 pin corss arms including Single Top Support Brace and Insulator fixing with all lead and lifts complete as per specifications and directions of engineer in char...
Fixing of Guy Set Complete with No. 15 Strain Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) with all lead and lifts complete as per specifications and directions of engineer in charge.
Stringing of Coyote ACSR conductor binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with all lead and lifts complete as per specifications a...
Stringing of Rabbit ACSR conductor binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with all lead and lifts complete as per specifications a...
Part G: Providing 250KVA Transformer center on Spun Pole structure:
Supply of Spun pole 11 Mtr Long with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Single Pole Transformer Structure Kit with Three H Frames without tranformer seating and seating Angle support cross arm for 63/100/250/500 kVA (UG Cable) MS with all lead and lifts complete...
Supply of HT Single Top Support with bolts, nuts & washers with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Rabbit ACSR Conductor for jumps with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Alkathene Tube 19 mm Dia and in coils of 30 Mtr with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of GI Wire 10 SWG with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Guy Wire 7/10 SWG with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of GI Pipe, 100 mm Dia for Cable raising etc., with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PVC Pipe 160 mm Dia with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PVC Pipe 25 mm Dia with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 kV, Solid Core Type HG Fuse Unit with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 kV, 200 Amps, Single Break GOS with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of LT Distribution Box for 250 kVA with MCCB with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of LT wiring (from DTC to LT line via metering box & LT protection kit) Double Circuit with all lead and lifts complete as per specifications and directions of engineer in charge. Al Lead Wire...
Supply of LT wiring (from DTC to LT line via metering box & LT protection kit) Double Circuit with all lead and lifts complete as per specifications and directions of engineer in charge. Heavy Duty L...
Supply of LT wiring (from DTC to LT line via metering box & LT protection kit) Double Circuit with all lead and lifts complete as per specifications and directions of engineer in charge. PG Clamp - Ra...
Supply of LT wiring (from DTC to LT line via metering box & LT protection kit) Double Circuit with all lead and lifts complete as per specifications and directions of engineer in charge. Spacers for ...
Supply of LT wiring (from DTC to LT line via metering box & LT protection kit) Double Circuit with all lead and lifts complete as per specifications and directions of engineer in charge. Fish Plate w...
Supply of LT wiring (from DTC to LT line via metering box & LT protection kit) Double Circuit LT Metering box with CTs and necessary wiring for housing ETV Meter with all lead and lifts complete as pe...
Supply of LT wiring (from DTC to LT line via metering box & LT protection kit) Double Circuit LT Electronic Tri-Vector Meter 5 Amps, - 0.5/1.0 Accuracy Class with all lead and lifts complete as per s...
Supply of 11 kV Lightning Arrester, Metal Oxide 10 kV, 5 kA Polymetic Type with ground disconnector with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PVC Insulation Tape in rolls of 10 Mtr with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Horizontal Cross Arm with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of MS Fish plate with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Caution/Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Anti Climbing Device (12 Mtr GI Barbed Wire) with all lead and lifts complete as per specifications and directions of engineer in charge.
Labour charges for erection 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil along with all accessories with all lead and lifts complete as per specifications ...
Part H: Shifting and re-routing:
Supply of PSCC Pole - 9 Mtr Long, 200 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of PSCC Pole - 8 Mtr Long, 200 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Rabbit ACSR Conductor with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts & washers for RCC pole - 9mtr long 145kg WL with all lead and lifts complete as per specifications and directions of engin...
Supply of 11KV 70/90KN disc insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 11 kV, 5 kN Polymeric Pin Insulator (24 mm dia FRP Rod)with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of LT 4 Pin Cross Arm with clamps, bolts, nuts & washers for RCC pole - 9mtr long 145kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of 1.1 kV Ceramic Pin Insulator with GI pins with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of No. 8 Strain Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply of Guy set complete with No. 15 strain insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of PSCC Pole - 9 Mtr Long, 200 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of RCC Pole - 8 Mtr Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Erection of PSCC Pole - 8 Mtr Long, 200 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Stringing of Rabbit ACSR conductor binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with all lead and lifts complete as per specifications a...
Fixing of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts & washers for RCC pole - 9mtr long 145kg WL with all lead and lifts complete as per specifications and directions of engin...
Fixing of LT 4 Pin Cross Arm with clamps, bolts, nuts & washers for RCC pole - 9mtr long 145kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Making of Guy set complete with No. 15 strain insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Releasing and re-fixing portion:
Releasing & re-Fixing of RCC Pole - 9 M Long,145 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Releasing & re-Fixing of RCC Pole - 8 M Long, 115 Kg WL with all lead and lifts complete as per specifications and directions of engineer in charge.
Releasing & re-Fixing of 11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole with all lead and lifts complete as per specifications and directions ...
Releasing & re-Fixing of LT 4-pin X arm with pole clamp, bolt, nut and washers with braces MS For RCC Pole with all lead and lifts complete as per specifications and directions of engineer in charge.
Releasing & re-Stringing of Rabbit ACSR conductor with 1.5% sag & 3% conductor accessories with all lead and lifts complete as per specifications and directions of engineer in charge.
Releasing & re-Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps with all lead and lifts complete as...
Releasing & re-Erection of 25 kVA Transformer on Transformer Structure with all lead and lifts complete as per specifications and directions of engineer in charge.
Releasing & re-Erection RCC 9mtr long of DP Transformer Structure with all lead and lifts complete as per specifications and directions of engineer in charge.
Releasing & re-Fixingof LT Protection Kit with all lead and lifts complete as per specifications and directions of engineer in charge.
Releasing & re-Fixingof 11 kV, HG Fuse Unit with Solid Core Insulator with all lead and lifts complete as per specifications and directions of engineer in charge.
Loading and Unloading of 9mtr Poles with all lead and lifts complete as per specifications and directions of engineer in charge.
Loading and Unloading of 8mtr Poles with all lead and lifts complete as per specifications and directions of engineer in charge.
Loading and unloading of 25KVA DTC with all lead and lifts complete as per specifications and directions of engineer in charge.
Streetlight Portion:
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff with all lead and lifts complete as per specifications and direc...
Supplying and Fixing GI Pipe B - Class as per IS-1239 50mm with all lead and lifts complete as per specifications and directions of engineer in charge.
Fabricating supplying and mounting MS box made out 18 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws with all lead and lifts compl...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint wi...
Supplying and drawing Flexible Multicore Cable manufacturedwith electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathedsuitable for workin...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers with all lead and lifts complete as per specifications and directions of engi...
Supply of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts complete as per specifications and directions of engineer in charge.
Supply & fixing of LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations up to 25HP/18KW) with all lead and lifts complete as per sp...
Fabricating, supplying and erection of ... ms long hot dip galvanized Octagonal hotdip Pole with BSEN10025 grade S355 JO steel plate for shaft, IS2062 for base plate with door opening arrangements, i...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., with all lead and lifts complete as per specif...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires with all lead and lifts complete as per...
Supply of Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supplying and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947 with...
Supplying and fixing micro processor based electronic timer (without contactor Din mounting using necessary bolts, nuts and washers etc.,3 - 120 Sec setting with all lead and lifts complete as per spe...
Laying of UG cables by Trench less technology(HDD) by adopting horizontal boring & drawing of cable including preparation at site with all lead and lifts complete as per specifications and directions ...
Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...
Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Cable trench excavation in Ordinary soil with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after
watering including cost of all labour complete as ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Supply and laying of DWC Pipe 40 mm Dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Supplying, fitting & Placing mild steel reinforcement with all lead and lifts complete as per specifications and directions of engineer in charge of the work.
Intelligent Light Monitoring System (ILMS) for street lights consisting of supply and erection of single phase smart streetlight control and monitoring system to remotely control and monitor using web...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid document.pdf
Tender Document • 1.57 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .